ATN FIITS14 w/3I IIT User Manual

FUSION THERMAL/NIGHT VISION SYSTEM

FIITS14 w/3I IIT

The FIITS system by ATN combines Image Intensification and Infrared Thermal Imaging technologies for night time low light and adverse weather conditions observation. This is achieved by combining an advanced image intensification system with a thermal imaging system.

The combination of the channels allows the user to take full advantage of both technologies by dichoptically creating a “Fused” image for enhanced night vision observation.

The results are a fused image that allows you the benefits and capabilities of both technologies. You will be able to detect both the Image Intensified Night Vision scene and the Thermal Imaging scene so you will not miss anything that you would have been unable to see by either technology separately.

The FIITS is lightweight, portable, and can be used as a handheld binocular or a dual eye goggle.

High resolution imaging Compact, light weight and durable

housing

Head/helmet mountable for hands free

usage High Quality optics “Fused” image for enhanced night vision

observation Handheld binocular or a dual eye goggle

usage Waterproof

HEAD MOUNT ASSEMBLY HELMET MOUNT ASSEMBLY HELMET MOUNT ASSEMBLY

Export Warning: These products are subject to one or more of the export control laws and regulations of the U.S. Government. Pending the model these products are under the control jurisdiction of

either the US Department of State or the US Bureau of Industry and Security US Department of Commerce. Export without proper licensing or consent is strictly prohibited.

1341 San Mateo Ave,

South San Francisco, CA 94080.

www.atncorp.com

e-mail: sales@atncorp.com, info@atncorp.com

Tel: 800-910-2862, 650-989-5100,

fax: 650-875-0129

FUSION THERMAL/NIGHT VISION SYSTEM

FIITS14 w/3I IIT

THERMAL SPECIFICATIONS

Magnification 1X Objective Focal Length 25 mm FOV 11° x 8° Focus Range from 1m to infinity Focus Adjustment Manual Exit Pupil 14 mm Eye Relief 25 mm Detector Type Uncooled Microbolometer Spectral Response 7-14 μm Pixels 160 x 120 Pixel Size 30 x 30 μm Angular Resolution, mrad 1,2 Thermal Sensitivity < 0,1°C Range to Detect a Human 475 m Output Format Analog PAL / NTSC Display Color OLED matrix Display Format SVGA, 852 x 600 pxl Digital ZOOM Fixed 2x (optional 5x)

NIGHT VISION SPECIFICATIONS

Total Darkness IR System Yes Multi-Purpose System Yes Magnification 1x Lens System F1.2, 27 mm Proshield Lens Coating Yes FOV 40° Range of Focus 0.25 m to infinity Diopter Adjustment -6 to +2 Controls Digital Automatic Brightness

Control

Yes

Bright Light Cut-off Yes Infrared Illuminator Yes (Built-in with flood lens) IR Indicator Yes (in FOV) Low Battery Indicator Yes (in FOV)

Power Supply

1 x 1.5 V AA type battery or 1 x 3 V CR123A type battery

Battery Life 60 hrs

Brightness Adjustment Manual Contrast Adjustment Automatic

Available User Interfaces

From outside PC through

USB interface Power Supply 2 x 3 V CR123A type battery Start-Up Time < 3 sec Operating Time w/one

battery pack

4 hrs

External Power Supply DC 6V, 500 mA

THERMAL SPECIFICATIONS

Magnification 1X Operating Temperature -20°C to +50 °C Storage Temperature Yes, up to 10 m submersion Dimensions 130x30x78 mm / 5.1”x5.1”x3” Weight (w/batteries) 0.75 kg / 1.65 lbs Warranty 1 year

TUBE SPECIFICATIONS

HIGH QUALITY 3I GEN IMAGE INTENSIFIER TUBE

PHOTOCATHODE TYPE GaAs GENERATION 3rd RESOLUTION, lp/mm * 51-64 SIGNAL TO NOISE RATIO* 18-24 FIGURE OF MERIT <1400 PHOTOSENSITIVITY 1000-1500

MTTF - MEAN TIMEBEFORE FAILURE, hours

EXPORT State License Req.

* Specifications are provided for informational purposes only. Actual values may vary