Page 1
Digital Ultra Sight
user`s guide
Important Export Restrictions! Com mod ities,
products, technologies and services contained in this
manual are subject to one or more of the export control laws and
regu latio n s of th e U.S . G over n ment and t h ey fa ll
under the control jurisdiction of the US BIS-Department of
Commerce. It is unlawful and strictly prohibited to
export, or attempt to export or otherwise transfer or sell any
hardware or technical data or furnish any service to any
foreign person, whether abroad or in the United States, for
which a license or written approval of the U.S. Government
is required, without first obtaining the required license or
written approval from the Department of the U.S. Government
h a v i n g j u r i s d i c t i o n . D i v e r s i o n c o n t r a r y t o U . S . l a w i s p r o h i b i t e d .
USER’S GUI DE (DI GITAL ULTR A S IGHT) REVIS ION 3 - MAY 2011
REFLEX SIGHT
Page 2
The information in this manual furnished for information use only, is subject to change without notice, is not
to be cons tru ed a s a commitment by ATN Cor p.
ATN Cor p. assumes no res ponsibilit y or liability for any e rro rs or inaccuracie s that may appear in this b ook.
©2011 ATN Corp. All right reserved.
FIVE RETICLE PATTERNS
2 MOA
Dot
6 MOA
60 M OA
1 MOA
Post with Dot
1 MOA
Post
60 M OA
ABOUT DIGITA L ULTRA S IGHT
The Digital Ultra Sight by ATNc is designed to
be a both eyes open, heads-up, rapid acquisition reflex sight with a New revolutionary feature called MultiAim®.
MultiAim® makes the ATNc Digital Ultra Sight
the only sight on the market where user can
instantly change the reticle pattern of the sight
with pushing a button, without a shift in the
point of impact.
Digitally controlled MultiAim® allows an array
of features such as 5-reticle configurations,
reticle brightness adjustments, brightness level
Large 33 mm
Heads Up
Display
Reticle
Pattern
Selector
Power
Button
Elevation
Windage
Digital
Brightness
Control
Standard
Weaver
Mount
Battery Housing
60 M OA
1 MOA
Open Cross Hair
60 M OA
60 M OA
1 MOA
Cross Hair
60 M OA
6 MOA
SPECIFICATIONS
• Magnification : 1
• Exit Pupil: 32 mm
• Windage & Elevation: 1 click=1/2" at 100 yds
• Multi-Reticle System
• Parallax Free
• 3V lithium battery (CR2032)
• Dimensions: 130x45x72 mm
• Weight: 0.2kg (0.45lb)
FEATURES
• Patented technology keeps point of impact
from shifting when you change reticles.
• 5 reticle patterns to choose from. Pattern can
be changed with a push of a butto n.
• Digital push controls to adjust reticle pattern
brightness.
• Parallax Free.
• Brightness level memory.
• Retic le pattern memor y.
• Instant Target acquisition.
• Fits stan dard Weaver style base.
• Ideal for handguns, rifles and shotguns.
• Heads up display for extra wide field of view.
• Installs quickly using 2 thumbnut tightened
clamps for extra st ability.
• High intensity diode for super bright reticle
pattern.
• Effic ient ele ctrical design for long battery life.
• Low battery indication.
• Optional Bright Light Filter available for opti-
mum per formance in super bright cond itions.
Page 3
memory, reticle pattern memory and low
battery indication.
Since there are no movable parts the reliability of the device is greater then standard reflex sights. MultiAim® combined with
superb optics, rugged construction, highly
accurate windage and elevation system
and an efficient electrical design for long
battery life makes the Digital Ultra Sight
the best Reflex sight on the market.
Military Personnel, Law Enforcement Professionals, Hunters and Sport Marksmen
can enjoy the sight that surpasses the competition in features and is priced far more
economically.
OPERATING INSTRUCTION
Insert Battery
The battery (included) is a coin style 3V
lithium (model #2032).
Unscrew the battery cap that is located on
the rear side of the unit.
The bat tery goes in negative side first.
Turning the Digital Ultra Sight on
After the battery is inserted press Power
button to turn unit on. Adjust reticle pattern with a push of the Digital Brightness
Control buttons to the desired brightness.
Hold the Ultra sight away from you and
look through it with both eyes open to see
a retic le pattern.
Reticle Patterns
Every Digital Ultra Sight comes with five
reticle patterns.
• Dot
• Post
• Post with Dot
• Open Cross Hair
• Cross Hair
You can choose your preferred pattern by
pushing the Reticle Pattern Selector button.
MOUNTING
The Digi t a l U l t r a S i g ht a r e d e s i g ne d t o b e
mounted on a st andard 7/ 8 weaver r ail.
CAUTION : Be sure gun is not loaded.
Use safe gun handling procedures at all
times.
Slightly loosen horizontal fixation screws.
Place the scope on the dovetail mount,
making certain that the mount aligns with
the receptor attachment screw. Re-tighten horizontal fixation screws.
WINDAGE AND ELEVATION
ADJUSTMENTS
The vertical (elevation) and horizontal
(windage) adjustments for the Digital Ultra Sight can be achieved by turning the
windage and elevation adjustment mech-
anisms. Each click equals 1/ 2 inch at 100
yards. When reaching the maximum of
the rotation do not use force.
MAINTAINING
The Digital Ultra Sight are waterproof
and shock-proof. However, you should
never try to take apart or clean it internally
(it will void your warranty). If your scope
ever does need repairs or adjustments, it
should be returned to ATN's service department. The exposed optical surfaces
will perform their best if they are occasionally wiped clean with a lens cloth or
with optical quality lens paper like those
for eyeglasses or camera lenses. Maintain the metal surfaces of you ultra sight
by removing any dirt or sand with a soft
brush so as to avoid scratching the finish.
Wipe down the scope with a damp cloth
and follow with a dry cloth. Finally, going
over the body with a silicon treated cloth
will restore luster and protect the scope
against corrosion, be careful not to touch
any of the lenses with the silicon cloth.
Page 4
2 YEAR PRODUCT WARRANTY
This product is guaranteed to be free from manufacturing
defects in material and workmanship under normal use for
a period of 2 (two) years from the date of purchase. In the
event a defect that is covered by the foregoing warranty
occurs during the applicable period stated above, ATN, at
its option, will either repair or replace the product, and such
action on the part of ATN shall be the full extent of ATN’s liability, and the Customer’s sole and exclusive remedy. This
warranty does not cover a product (a) used in other than
its normal and customary manner; (b) subjected to misuse;
(c) subjected to alterations, modifications or repairs by the
Customer of by any party other than ATN without prior written consent of ATN; (d) special order or “close-out” merchandise or merchandise sold “as-is” by either ATN or the
ATN dealer; or (e) merchandise that has been discontinued
by the manufacturer and either parts or replacement units
are not available due to reasons beyond the control of ATN.
ATN shall not be responsible for any defects or damage that
in ATN’s opinion is a result from the mishandling, abuse,
misuse, improper storage or improper operation, including
use in conjunction with equipment which is electrically or
mechanically incompatible with or of inferior quality to the
product, as well as failure to maintain the environmental
conditions specified by the manufacturer. This warranty is
extended only to the original purchaser. Any breach of this
warranty shall be waived unless the customer notifies ATN
at the address noted below within the applicable warranty
period.
The customer understands and agrees that except for the
foregoing warranty, no other warranties written or oral,
statutory, expressed or implied, including any implied warranty of merchantability or fitness for a particular purpose,
shall apply to the product. All such implied warranties are
hereby and expressly disclaimed.
LIMITATION OF LIABILITY
ATN will not be liable for any claims, actions, suits, proceedings, costs, expenses, damages or liabilities arising
out of the use of this product. Operation and use of the
product are the sole responsibility of the Customer. ATN’s
sole undertaking is limited to providing the products and
services outlined herein in accordance with the terms and
conditions of this Agreement. The provision of products
sold and services performed by ATN to the Customer
shall not be interpreted, construed, or regarded, either
expressly or implied, as being for the benefit of or creating
any obligation toward any third party of legal entity outside ATN and the Customer; ATN’s obligations under this
Agreement extend solely to the Customer. ATN’s liabil-
ity hereunder for damages, regardless of the form or
action, shall not exceed the fees or other charges paid
to ATN by the customer or customer’s dealer. ATN
shall not, in any event, be liable for special, indirect,
incidental, or consequential damages, including, but
not limited to, lost income, lost revenue, or lost profit,
whether such damages were foreseeable or not at the
time of purchase, and whether or not such damages
arise out of a breach of warranty, a breach of agreement, negligence, strict liability or any other theory of
liability.
PRODUCT WARRANTY REGISTRATION
In order to validate the warranty on your product, ATN must
receive a completed Product Warranty Registration Card for
each unit or complete warranty registration on our website at
www.atncorp.com. Please complete the included form and
immediately mail it to our Service Center: ATN Corporation,
1341 San Mateo Avenue, South San Francisco, CA 94080.
OBTAINING WARRANTY SERVICE
To obtain warranty service on your unit, End-user must
notify ATN service department by calling 800-910-2862
or 650-989-5100 or via e-mail service@atncorp.com
to receive a Return Merchandise Authorization number
(RMA).
When returning please take or send the product, postage paid, with a copy of your sales receipt to our service
center, ATN Corporation at the address noted above. All
mer cha ndi se m ust be ful ly ins ure d wi th the cor rec t pos tage; ATN will not be responsible for improper postage
or, missing or damaged merchandise during shipment.
When sending product back, please clearly mark the
RMA# on the outside of the shipping box. Please include a letter that indicates your RMA#, Name, Return
Address, reason for service return, Contact information
such as valid telephone numbers and/or e-mail address
and proof of purchases that will help us to establish the
val id st ar t d at e o f the w ar ra nt y. Pr od uc t m er cha nd is e r eturns that do not have an RMA listed may be refused or a
significant delay in processing may occur.
Estimated Warranty s er vice t im e is 10 -20 business
days. End-user/customer is responsible for postage to
ATN f or wa rran ty s er vi ce. ATN wil l cov er r etu rn pos tage/
shipping to continental USA end-users/customers after
warranty repair only if product is c overed by aforementioned warranty. ATN will return product after warranty
service by domestic UPS ground and/or domestic mail.
Any other requested, required or international shipping
method the postage/shipping fee will be the responsibility of the end-user/customer.
Fo r custome r servi ce and tec hni cal suppor t,
please contact
American Technologies Network Corp.
North American Office
1341 S an Mat eo Avenu e, South San Francisc o,
CA 94080
phone: 800-910-2862, 650-989-5100
fax: 650-875-0129
European Office
The followi ng countr ies can us e our toll free
number:
00 8 00 9 10 2-862 0
Austria, France, Germany, Holland, Italy, Spain,
Sweden, Switzerland
For other countries, please use
38 048-7770214 or 38 048 -7770 345
www.atncorp.com
Registe R youR pRodu c t waRRant y online at
www.atncoRp.com/waRRanty
Loading...