ATN Army Mil-Dot, 10x65Z User Manual
10x65Z
ARMY MILDOT
u s e r ` s g u i d e
AMERICAN
TECHNOLOGIES
NET WORK
CORP.
Flip-up
lens cap
Lens cap
push- button
Focusing
system
Battery
housing
Reticle brightness
adjustment
±5 Diopter
ATN mounting system
Elevation
Windage
Fixation screw of the
locking mechanizm
Bullet drop compensator
with interc hangeable cams
The information in this manual furnished for information use only, is subject to change without notice, is not to be
construed as a commitment by ATN Corp.
ATN Corp. assumes no responsibility or liabilit y for any errors or inaccuracies that may appear in this book.
©2003 ATN Corp. All right reser ved.
APPLICATION
The ATN 10x65Z-Army Mil-Dot is not an evolution but a revolution, not an improvement, but
a breakthrough. For years the best names in
optics were aspired to produce a balanced
large aperture tactical scope. Large aperture
renders into large Exit Pupil. Large Exit Pupil
means longer operating hours and better
performance in low light conditions and in
“stressed” environment. Nevertheless, the
“let’s get a Big Hunting scope and put a Mil-Dot
in it and call it “Tactical” ” approach always led
to a problem with uncomfortably high mounting.
FEATURES
• Magnification: Fixed 10X.
• Objective Aperture: 65mm.
Construction/Materials: Composite struc -
ture using aircraft aluminum alloy, high-carbon
steel alloy and titanium inserts with 2mm wall
minimum.
• Optics: Patented prismatic design; highest
grade heavy glass; all elements and surfaces
are multicoated; developed with latest optical
software and manufactured with topmost tolerances.
• Reticle : Standard Army Mil-Dot; edged
prismatic/optical glass sandwich; Illuminated
with 12 rheostat positions; visible and operational if illumination is turned off; standard side
locking mechanism.
• Point of impact: Always on the center of the
field of view.
• Field of View @ 10X: 3
- 17ft at 100 yards (5.6 meters at 100 meters),
- 170ft at 1000 yards (56 meters at 1000
meters).
• Bullet Drop Compensator: Build in ; standard for .223, .300, .308, 30- 06, .50BMG
calibers; with 200 yard zero-in and up to 1000
yards and up to 1800 yards for .50BMG.
•
Parallax adjustment:
• Exit Pupil @10X: 6.5mm.
o
from 30 yards to infinity.
The new ATN 10x65Z-Army Mil-Dot prismatic
design solves all the problems, and allows a
sniper to use a scope with 65mm aperture that
sits closer to the barrel than a standard 40mm
scope. With a sharp crisp image, workable
size, high durability and with an abundance of
features like illuminated Army Mil-Dot reticle,
interchangeable Bullet Drop Compensator for
five different calibers, “will-not-bump” eye relief
and parallax adjustment the ATN 10x65Z is a
standard not an option for LE marksmen and
military sniper alike.
• Eye Relief: 3” (75mm); sufficient for operation
with large calibers and/or protective glasses or
gas mask.
• Target knobs: Included.
• Environment: waterproof up to 66 feet (20
meters) up to 1 hour; fog-proof and nitrogen
purged.
• Diopter Adjustment: +/- 5.
• Adjustment: 1/8 MOA per click;
- with 950 clicks, 9.5 revolutions with 100 clicks
per revolution and 120 MOA of total elevation
adjustment and BDC included;
- with 475 clicks, 4.75 revolutions with 100
clicks per revolution and 60 MOA of total elevation.
• Power source : 3V; standard watch battery
type CR2032 or CR2432; with minimum 100
hours of continuous use.
• Length: 14” (350mm).
Weight: 53oz (1,6 kilo) with built-in mounting
system.
• Sunshade : Standard built-in.
• Front Lens Cover: Push-button; standard
built-in.
• Mounting system: Built-in monorail with
ejection cavity and thumb-screws for tool-less
mounting on NATO standard Picatinny rail or
quality Weaver bases.
2
Loading...