2
specificATions
Generation ...................................................................................................... 1st
Magnification................................................................................................... 2.5X
Lens system .................................................................................................... F1:1.2, F50mm
FOV ................................................................................................................. 20 deg.
Range of focus ............................................................................................... 1m to infinity
Reticle ............................................................................................................. Red On Green
Windage & elevation adjustments ................................................................. 1/8MOA
IR illuminator ................................................................................................... Super 450mw
Battery life....................................................................................................... 10-20 hours
Dimensions .................................................................................................... 9.8” x3.9” x3.6”
Weight ............................................................................................................ 1.5kg/3.3 Lbs
Diopter adjustment ........................................................................................ +/-5
Operating temperature .................................................................................. -40°C to +40°C
prepArATion for operATion
Before getting started make sure to follow these steps:
• Install the battery into its housing with the polarity order shown on the main body of the unit.
• Switch on the Aries scope with the protective lens cover still attached to the lens.
• Make sure that the green luminance of the light intensifier tube is present.
• Observe the scene, and adjust the diopter and/or
len s for optim al image clarity.
• You may now enter a dark environment or simply
shut the lights off in order to darken the room.
• Next, remove the lens cap/daylight filter.
• Observe the scene, and adjust the front lens for
ideal foc us.
• Finally, you may want to turn the infra red (IR)
illuminator on. Notice the ability of the Aries scope
to see in total darkness with the ai d of the IR
illuminator.
oper ATing
mounTing
1. Slightl y loosen the fixin g screws on the 7/ 8” weaver rail built into t he scop e.
2. Place the scope on the dovetail mount of the fire arm making cer tain that the mount aligns
with the receptor at t achment screw gro ove. Adj ust as necessar y.
3. Tighten the fixing screws.
NOTE: Rece ptor att achment sc rews may need to be tightene d after c ontinuous shooting.
mounTing sysTem
The ATN Night Vision Riflescopes Mounting System allows to change the position of the
riflescope flexibly on the weapon in relation to a shooter in combination with the fixed
positions already available on the weaver rail. For this purpose in the base of the mounting
bracket there is a rail with a fixing projection. There are three grooves in the mounting
bracket for mounting this rail. Besides it is possible to change the position of the riflescope
add itiona lly by 1/3 of inch. For doing this o ne nee ds to about-face the ra il.