ATN Aries 390 User Manual
Aries 390 “Paladin”
Aries 6900/7900/8900
“Crusader”
u s e r ` s g u i d e
Expor t of night vision equipment and optical sighting
equipment is controlled by the
U.S. Department of State, Office
of Defense Trade Controls in
accordance with International
Traffic in Arms (ITAR), Title 22,
Code of Federal Regulations Part
120-130and/or the Export Administration Regulations (EAR) U.S.
Department of Commerce. Illegal
export of these commodities is
strictly prohibited.
AMERICAN
TECHNOLOGIES
NETWORK
CORP.
Elevation
Windage
ARIES 6900/7900/8900 “CRUSADER”
Flip-up lens cap
“Red on Green” reticle
system
New Titanium Mounting
System (mounts to std. U.S.
7/8” Weaver Rail)
DIGITAL
INFRA-RED
ILLUMINATOR
FREE ADD- ON FOR
YOUR ARIES SCOPE
Flip-up lens cap
Retice brightness
adjustment
Batter y
housin g
Fixatio n
screw
Focusing system
5 Diopter
Master power
button
IR brightness
adjust ment
Battery
housing
IR elevation
IR focusing
IR Windage
ARIES 390 “PALADIN”
5 Diopter
New Titanium mounting
system (mounts to std. U.S.
7/8” weaver rail)
The information in this manual furnished for information use only, is subject to change without notice, is not to be
construed as a commitment by ATN Corp.
ATN Corp. assumes no responsibility or liabilit y for any errors or inaccuracies that may appear in this book.
©2004 ATN Corp. All right reser ved.
Retice brightness
adjustment
Elevation
Windage
“Red on Green”
reticle system
Master power
button
Focusing system
Battery
housing
APPLICATION
Our new Aries 390 “Paladin” is the best 1st
generation scope on the market.
We started by improving the optical configurations with lowered F-stop factors (from 1.7
on previous models to 1.4(!) on new) and
optical resolution that is beyond current
military standards (old 45lp /mm and the
new is 60lp/mm). This provides you with the
brightest and clearest image in a 1st gen unit.
Then we added our precision “red on green”
aiming system, easy push button operation,
reticle brightness adjustment and our new
detachable, most powerful in the industry
450mw Infrared Illuminator with dedicated
windage and elevation adjustments.
FEATURES
ARIES 390 “PALADIN”
• Top-of-the-line First Generation weapon
sight
• New, high resolution Gen. 1+ LIT.
• “Red on Green” reticle system with 1/8
inch @ 100yards adjustment
• 4X magnification with new F:1.4, f90mm
lens
• New, detachable most powerful in the
industry 450mWt Infrared Illuminator with
dedicated windage and elevation adjustments.
• New Titanium mounting system
• Dimensions: 12”x4”x2.8”
• Weight: 2.8 lbs.
Do you want the best NVD weapon sight
on the market? If so then our new Aries
6900 /790 0/8900 “Crusader” is for you.
It doesn’t get any better then the Crusader
when it comes to performance. For the Crusader we use a top of the line “Prime Select”
light intensifier tube for added light gain and
resolution. Combine this select tube with 5x
magnification and a super fast F:1.4 lens the
image that you will get out of your Crusader
is unbelievable.
The best optics, tubes and 3 year warranty
makes the Aries 6900/7900/ 8900 Crusader
one of the best Night Vision weapon sights
there is!
ARIES 6900/7900/8900 “CRUSADER”
• Top-notch performance with pro-oriented
design
• 5X magnification, F:1.4, f90mm lens
• “Red on Green” reticle system with 1/8
inch @ 100yards adjustment
• New Titanium mounting system
• Prime Select US 2nd Gen. (6900),
Prime Select US 3rd Gen. (7900) or 4th
Gen.(8900) tubes used
• Automatic brightness control(ABC) for
tube protection
• Dimensions: 12”x4”x3”
• Weight: 2.8 lbs.
• Made in USA
PREPARATION FOR OPERATION
Before getting star ted make sure to follow
these steps:
• Install the battery into its housing with the
polarity order shown on the main body of
the unit.
• Switch on the Aries scope with the protective tens cover still attached to the tens.
• Make sure that the green luminance of the
light intensifier tube is present.
• Observe the scene, and adjust the diopter
and/or lens for optimal image clarity.
• You may now enter a dark environment or
simply shut the lights off in order to darken
the room.
• Next, remove the lens cap/daylight filter.
• Observe the scene, and adjust the front
lens for ideal focus.
• Finally, you may want to turn the infra red
(IR) illuminator on. Notice the ability of the
Aries scope to see in total darkness with
the aid of the IR illuminator.
Battery installation
2
Loading...