Atmel REB212BSMA-EK Quick Start Manual

APPLICATION NOTE

AT03324: Atmel REB212BSMA-EK Quick Start Guide

Atmel MCU Wireless

This application note briefly describes how to set up and run the pre-flashed
applications supplied with the Atmel

®

REB212BSMA Evaluation Kit.

Introduction

The Atmel Controller Base Board (CBB) serves as the microcontroller platform
for the Atmel Radio Extender Board (REB). The REB connected to a CBB forms
a fully functional, battery powered and portable wireless node. The
REB212BSMA Evaluation Kit (REB212BSMA-EK) is targeted for evaluating the
new features of the Atmel AT86RF212B radio transceiver.

2

Table of Contents

1. Getting Started ................................................................................... 3

1.1 Kit Contents ...................................................................................................... 3

1.2 Board Assembly ................................................................................................ 3

1.3 Connecting to a PC ........................................................................................... 3

1.4 Programming..................................................................................................... 4

2. Performance Analyzer ........................................................................ 4

Appendix A. Revision History ............................................................. 5

AT03324: Atmel REB212BSMA-EK Quick Start Guide [APPLICATION NOTE]

Error! Reference source not found.