Atmel AT30TK175, AT30TSE002B, AT30TS75, AT30TS750, AT30TSE758 Hardware User's Manual
•
•
•
•
•
•
•
•
•
Power LED
Alarm status LEDs
Atmel Digital Temperature Sensors Evaluation Kit
Atmel AT30TK175 Starter Kit
Hardware User Guide
Features
Four digital temperature sensor devices:
• Atmel
• Atmel AT30TS75
• Atmel AT30TS750
• Atmel AT30TSE758
®
AT30TSE002B
Contents
One Atmel AT30TK175 adapter board
One Atmel AT88Microbase AVR® base module
6-inch USB cable
18-inch extension cable
Four event LEDs
Four alarm status LEDs:
• Critical, high, low, and normal
Software switchable VCC: 3.3V, 5.0V, and OFF
Power LED
Introduction
This starter kit utilizes the Atmel AT30TK175 adapter board to allow users to experiment and develop with the Atmel
AT30TSE002B, AT30TS75, AT30TS750, and AT30TSE758 digital t emperature sensors.
The AT30TK175 daughterboard interf ac es with the Atmel AT88Microbase board (included in the kit) to provide communication to a
PC via a USB interface, allowing designers to learn and experiment with the temperature sensor demonstration utility. In addition,
this kit supports a modular approach, enabling the AT30TK175 daughterb oar d to connect directly to an Atmel STK
development platform to easily add t em perature monitoring capabilities to applications.
®
series AVR
Figure 1. Atmel AT30TK175 adapter board
Digital temperature sensor and the
associated EVENT/ALERT LED
8745A–DTS–5/11
Atmel AT30TK175 Starter Kit Hardware User Guide
Atmel
Atmel
Atmel
Atmel
Serial EEPROM address
0x53 - -
0x52
Pins
10 9 8 7 6 5 4 3 2
1
Signal
VCC
GND
CRIT
LED
VCC
SEL
NORM
LED
VCC
EN
HIGH
LED
LOW
LED
SDA
SCL
1. Atmel AT30TK175STK Starter Kit
The AT30TK175 is sold with the AT88Microbase to form the Atmel AT30TK175STK starter kit. For additional information
on the AT88Microbase, see the “Atmel AT88Mi c robase Hardware User Guide.”
Figure 1-1. The Atmel AT30TK175 daughterboard with the Atmel AT88Microbase module
2. Board Configuration
Table 2-1. Seven-bit device address
Device
Temperature sensor address 0x1B 0x48 0x49 0x4A
2.2. 10-pin Interface Header
Table 2-1. I2C pins: SCL, SD
AT30TSE002B
AT30TS75
AT30TS750
AT30TSE758
2
8745A–DTS–5/11
Loading...