Atmel 08PIA-DK User Manual

08PIA-DK Digital Piano with
ATSAM9708 and ATSAM3303

..............................................................................................

User Guide

6163A–DRMSD–12-Jul-05

08PIA-DK Digital Piano with ATSAM9708 and ATSAM3303 User Guide

Table of Contents

Section 1

1.1 Introduction ...............................................................................................1-1

1.2 Connection Instructions ............................................................................1-1

1.3 Front Panel ...............................................................................................1-2

1.4 Implementation .........................................................................................1-2

1.5 Optional Functions ....................................................................................1-5

Section 2

2.1 Document Details......................................................................................2-1

2.2 Revision History ........................................................................................2-1

08PIA-DK Digital Piano with ATSAM9708 and ATSAM3303 User Guide i

6163A–DRMSD–12-Jul-05

6163A–DRMSD–12-Jul-05

08PIA-DK Digital Piano with ATSAM9708 and ATSAM3303 User Guide

Section 1

Connecting the 08PIA-DK

1.1 Introduction The 08PIA-DK is a high quality stand-alone evaluation board based on the ATSAM9708

and the ATSAM3303 dedicated to digital piano and keyboard instruments.

1.2 Connection Instructions

! Connect the front panel to the main board.

! Connect the main board to a FATAR TP10 (or TP23) keyboard.

! Connect the main board to pedal (see Table 1-1 for pinout).

! Connect the main board audio outputs to line level inputs of a mixer, a stereo sound

system, etc.

! Connect the main board to 12V/1A DC power supply (- to tip, + to ring).

Table 1-1. Pedal Inputs (J15) Pinout

Pin No. Function Description

1 Pedal Ground Reference Ground for pedal inputs

6 level Half-pedal

2 Forte (Sustain)

3 Sostenuto

4 Una Corda (Soft)

• Sustain Max if connected to Pedal Ground

• Sustain Off if not connected

On/Off pedal

• Sostenuto on if connected to Pedal Ground

• Sostenuto off if not connected

On/Off pedal

• Soft on if connected to Pedal Ground

• Soft off if not connected

08PIA-DK Digital Piano with ATSAM9708 and ATSAM3303 User Guide 1-1

6163A–DRMSD–12-Jul-05

Connecting the 08PIA-DK

1.3 Front Panel

Figure 1-1. 08PIA-DK Front Panel

Style Selection

Rhythm Only

Variation

1.4 Implementation

Chorus
Reverb
Dynamic
Intro/Ending
Fill In/Key Start
Start/Stop

Set

Instrument Select

Demo

Rec Mode

Track 2
Track 1

Metronome

Play/Rec Start

Tempo +

Tempo -

Equalizer:

- Treble

- Bass

1.4.1 Instrument Select

Table 1-2. Instrument Select

Setting Instrument

1

Studio Grand Piano

2 Concert Grand Piano
3 Electric Piano 1
4 Electric Piano 2
5 Harpsichord
6 Vibes
7 Strings
8 Church Organ

Layer (dual) mode is available by simultaneously pressing two “Instrument Select”
buttons.

1-2 08PIA-DK Digital Piano with ATSAM9708 and ATSAM3303 User Guide

6163A–DRMSD–12-Jul-05

1.4.2 Reverb Type Possible settings are:

! Room1

! Room2

! Hall

Reverb depth can be set for each instrument. Follow the steps below:

1. Hold the “Reverb” button pressed down.

2. Use the “Tempo +/-” buttons to adjust the reverb depth in the range from 0 to 20

1.4.3 Chorus Possible settings are:

! Off

! Chorus1

! Chorus2

Chorus depth can be set for each instrument. Follow the steps below:

1. Hold the “Chorus” button pressed down.

2. Use the “Tempo +/-” buttons to adjust the chorus depth in the range from 0 to 20.

1.4.4 Dynamic Curve Possible settings are:

Connecting the 08PIA-DK

! Normal

! Hard

! Soft

! Fixed Velocity (default = 64)

The value for the fixed velocity can be set:

1. Press the “Dynamic” button repeatedly until all the “Dynamic” LEDs are off.

2. Hold the “Dynamic” button pressed down.

3. Use the “Tempo +/-” buttons to adjust the fixed dynamic in the range from 0 to

127.

1.4.5 Sympathetic Resonance

Press the “Set” button repeatedly.

! 0 = No resonance

! 1 = Low resonance depth

! 2 = Medium resonance depth

! 3 = High resonance depth

1.4.6 Demo Press “Demo”, then press the “Instrument Select” button 1, 2 or 3.

08PIA-DK Digital Piano with ATSAM9708 and ATSAM3303 User Guide 1-3

6163A–DRMSD–12-Jul-05

Connecting the 08PIA-DK

1.4.7 Metronome Possible settings are:

! On

! Off

The metronome signature can be set. Follow the steps below:

1. Hold the “Metronome” button” pressed down.

2. Use the “Tempo +/-” buttons to choose the signature.
Available signatures are 1/4, 2/4, 3/4, 4/4, 6/4, 6/8, 12/8.

1.4.8 Sequencer Use “Rec Mode”, “Play/Rec Start”, “Track 1" and “Track 2" buttons.

Below is an example of how to use the sequencer:
! Record track 1:

1. Press the “Rec Mode” button. The “Rec Mode” LED is lit.

2. Press the “Track 1" button. “Play/Rec Start” and “Track 1" LEDs are flashing.

3. Start recording by playing the keyboard or by pressing the “Play/Rec Start” but­ton. “Play/Rec Start” LED stops flashing and stays lit.

4. Stop recording by pressing the “Rec Mode” button. “Rec Mode” LED is off.

! Play track 1:

1. If “Track 1" LED is not lit, press the “Track 1" button. The “Track 1" LED is lit.

2. Press the “Play/Rec Start” button to play what is recorded on Track 1. The
“Play/Rec Start” LED is lit.

! Record track 2:

1. Press the “Rec Mode” button. “Rec Mode” and “Track 1" LEDs are lit.

2. Press the “Track 2" button. “Play/Rec Start” and “Track 2" LEDs are flashing

3. Start recording by playing the keyboard or by pressing the “Play/Rec Start” but­ton. “Play/Rec Start” LED stops flashing and stays lit.

4. Stop recording by pressing the “Rec Mode” button. “Rec Mode” LED is off.

! Play track 1 and track 2:

1. If “Track 1" LED is not lit, press the “Track 1" button. The “Track 1" LED lights up.

2. If “Track 2" LED is not lit, press the “Track 2" button. The “Track 2" LED lights up.

3. Press the “Play/Rec Start” button to play what is recorded on Track 1 and Track

2. The “Play/Rec Start” LED is lit.

1-4 08PIA-DK Digital Piano with ATSAM9708 and ATSAM3303 User Guide

6163A–DRMSD–12-Jul-05

Connecting the 08PIA-DK

1.5 Optional Functions

1.5.1 Style Player Use “Intro/Ending”, “Fill-In”, “Start/Stop”, “Variation”, “Rhythm Only” and “Style Selec-

tion” buttons.

1.5.2 Style Selection Hold the “Style Selection” button and select with “Tempo+/-” buttons.

Table 1-3. Style Selection Settings

Setting Style

0 EuroPop

1 90s Dance

2 KickDance

380s Pop

4 TechnoRock

5 Country

6 Beguine

7 Bossa

8Blues

9 JazzTet

10 Rock&Roll

11 Soca

12 Lounge

13 Waltzer

08PIA-DK Digital Piano with ATSAM9708 and ATSAM3303 User Guide 1-5

6163A–DRMSD–12-Jul-05

Connecting the 08PIA-DK

1-6 08PIA-DK Digital Piano with ATSAM9708 and ATSAM3303 User Guide

6163A–DRMSD–12-Jul-05

2.1 Document Details

2.1.1 Title 08PIA-DK User Guide

2.1.2 Literature Number 6163

2.2 Revision History

2.2.1 Version A First issue.

Section 2

Revision History

08PIA-DK Digital Piano with ATSAM9708 and ATSAM3303 User Guide 2-1

6163A–DRMSD–12-Jul-05

Revision History

2-2 08PIA-DK Digital Piano with ATSAM9708 and ATSAM3303 User Guide

6163A–DRMSD–12-Jul-05

Atmel Corporation Atmel Operations

2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: [phone]
Fax: [phone]

Regional Headquarters

Europe

Atmel Sarl
Route des Arsenaux 41
Case Postale 80
CH-1705 Fribourg
Switzerland
Tel: [phone]
Fax: [phone]

Asia

Room 1219
Chinachem Golden Plaza
77 Mody Road Tsimshatsui
East Kowloon
Hong Kong
Tel: [phone]
Fax: [phone]

Japan

9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
Japan
Tel: [phone]
Fax: [phone]

Memory

2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: [phone]
Fax: [phone]

Microcontrollers

2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: [phone]
Fax: [phone]

La Chantrerie
BP 70602
44306 Nantes Cedex 3, France
Tel: [phone]
Fax: [phone]

ASIC/ASSP/Smart Cards

Zone Industrielle
13106 Rousset Cedex, France
Tel: [phone]
Fax: [phone]

1150 East Cheyenne Mtn. Blvd.
Colorado Springs, CO 80906, USA
Tel: [phone]
Fax: [phone]

Scottish Enterprise Technology Park
Maxwell Building
East Kilbride G75 0QR, Scotland
Tel: [phone]
Fax: [phone]

RF/Automotive

Theresienstrasse 2
Postfach 3535
74025 Heilbronn, Germany
Tel: [phone]
Fax: [phone]

1150 East Cheyenne Mtn. Blvd.
Colorado Springs, CO 80906, USA
Tel: [phone]
Fax: [phone]

Biometrics/Imaging/Hi-Rel MPU/
High Speed Converters/RF Datacom

Avenue de Rochepleine
BP 123
38521 Saint-Egreve Cedex, France
Tel: [phone]
Fax: [phone]

Literature Requests

www.atmel.com/literature

Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any
intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDI-

TIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY
WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDEN­TAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT
OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no

representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications
and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided
otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use
as components in applications intended to support or sustain life.

© Atmel Corporation 2005. All rights reserved. Atmel®, logo and combinations thereof, Everywhere You Are® and others are registered trade-
marks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.

Printed on recycled paper.

6163A–DRMSD–12-Jul-05