ATM SB-38 Data Sheet
The SwivelBeam is an easy to use load-rated and off the shelf loudspeak-
er rigging and aiming system from single loudspeakers to full line arrays.
It is ideal for aiming sound in left and right of house congurations and
provides side and backlls where speakers cannot be wall mounted.
The upper cross arm of the SwivelBeam rigs from two overhead suspen-
sion points. The lower cross arm supports the loudspeaker and rotates
relative to the upper section, horizontally, up to 360°.
This gives the installer precise horizontal aiming of sound.
For precise vertical aiming, a self-contained cabinet located behind the
lower cross arm.
Typical venues include theatres, churches, school auditoriums, gymnasi-
ums, sport arenas, meeting halls and theme park attractions.
SB-38
SPECIFICATIONS:
Material: Alloy Structural Steel Tube
Finish: Powder Coat Paint
Color: Black
WLL: 430 lb / 195 Kg
Design Factor: 7:1
Pack Count: 1/carton
STEERABLES
STEERABLE SUSPENSION SYSTEM
► Central pivot for steering
► Rear pull back point for tilting
► Rugged Steel Construction
► Powder Coat Finish
► Wire Rope Supplies
► Eyebolts, Shackles, Turnbuckles
► Beam Clamps, Swivel Rings, Truss Clamps
STANDARD FEATURES:
OPTIONAL ACCESSORIES
PACKAGE CONTENTS:
Swivel Beam1 pc
SUSPENSION & AIMING FOR SINGLE CABINETS
430 lb. WLL
DIMENSIONS:
SB-38
The SwivelBeam is an easy to use load-rated and off the shelf loudspeak-
er rigging and aiming system from single loudspeakers to full line arrays.
It is ideal for aiming sound in left and right of house congurations and
provides side and backlls where speakers cannot be wall mounted.
The upper cross arm of the SwivelBeam rigs from two overhead suspen-
sion points. The lower cross arm supports the loudspeaker and rotates
relative to the upper section, horizontally, up to 360°.
This gives the installer precise horizontal aiming of sound.
For precise vertical aiming, a self-contained cabinet located behind the
lower cross arm.
Typical venues include theatres, churches, school auditoriums, gymnasi-
ums, sport arenas, meeting halls and theme park attractions.
STEERABLES
STEERABLE SUSPENSION SYSTEM
430 lb. WLL
430 lb. WLL
SUSPENSION & AIMING FOR SINGLE CABINETS
STANDARD FEATURES:
Central pivot for steering
Rear pull back point for tilting
Rugged Steel Construction
Powder Coat Finish
OPTIONAL ACCESSORIES:
Wire Rope Supplies
Eyebolts, Shackles, Turnbuckles
Beam Clamps, Swivel Rings, Truss Clamps
41.0”
38.0”
STEERABLE SUSPENSION SYSTEM
The SwivelBeam is an easy to use load-rated and off the shelf loudspeaker
rigging and aiming system from single loudspeakers to full line arrays. It is
ideal for aiming sound in left and right of house configurations and provides
side and backfills where speakers cannot be wall mounted.
The upper cross arm of the SwivelBeam rigs from two overhead suspension
points. The lower cross arm supports the loudspeaker and rotates relative
to the upper section, horizontally, up to 360°. This gives the installer precise
horizontal aiming of sound. For precise vertical aiming, a self-contained
cabinet located behind the lower cross arm.
Typical venues include theatres, churches, school auditoriums, gymnasiums,
sport arenas, meeting halls and theme park attractions.
SPECIFICATIONS:
Materials: Alloy Structural Steel Tube
Finish: Powder Coat Paint
Color: Black
WLL: 430 lb / 195 Kg
Design Factor: 7:1
Pack Count: 1/carton
DIMENSIONS:
STEERABLES
PACKAGE CONTENTS:
1 pc. Swivel Beam
4.86”
6.0”
8.5”
Adaptive Technologies Group
1635 E. Burnett Street | Signal Hill, CA 90755 USA
Ph: 562.424.1100 | Fax: 562.424.3520
www.adapttechgroup.com
Front View Standard Pull-Back
ALWAYS INSTALL SAFETY CABLES
WARNING: Mounting and/or suspension of audio and video equipment requires
experienced professionals. Improperly installed loudspeakers can result in property
damage, personal injury and/or liability to the installing contractor.
Configuration
SB-38
SB-38
STEERABLES
SB-38
STEERABLES
SB-38
STEERABLES
SUSPENSION & AIMING FOR SINGLE CABINETS
STEERABLES
SWIVEL BEAM - USING
SINGLE TILT CABLE KIT ASSEMBLY
Fly medium to large speaker cabinets in
a vertical orientation using narrow model
SwivelBeams as a load-rated suspension
and steering device. The SwivelBeam’s
upper arm provides all the suspension
strength from two points that secure to
any overhead structural member such as
an I-Beam while the lower arm rotates
horizontally to aim the speaker into the
desired direction. A third attach point on
the lower arm provides a way to tilt the
speaker downward and into the desired
angle.
SWIVEL BEAM - USING
DOUBLE TILT CABLE KIT ASSEMBLY
Fly medium to large speaker cabinets
in the horizontal orientation using wider
model SwivelBeams as a load-rated
suspension and steering device. The
SwivelBeam’s upper arm provides all
the suspension strength from two points
that secure to any overhead structural
member such as an I-Beam while the
lower arm rotates horizontally to aim
the speaker into the desired direction.
A third and fourth attach point on the
lower arm provides a way to tilt the
speaker downward and into the desired
angle.
SWIVEL BEAM - USING
WIRE ROPE TO FLY LINE ARRAYS
Fly medium size line arrays using wider
model SwivelBeams as a load-rated
suspension and steering device. The
SwivelBeam’s upper arm provides all the
suspension strength from two points that
secure to any overhead structural member
such as an I-Beam while the lower arm
rotates horizontally to aim the line array
into the desired direction. A third attach
point on the lower arm provides a pull
back to tilt the line array into the desired
down-angle.
Adaptive Technologies Group
1635 E. Burnett Street | Signal Hill, CA 90755 USA
Ph: 562.424.1100 | Fax: 562.424.3520
www.adapttechgroup.com
ALWAYS INSTALL SAFETY CABLES
WARNING: Mounting and/or suspension of audio and video equipment requires
experienced professionals. Improperly installed loudspeakers can result in property
damage, personal injury and/or liability to the installing contractor.
Loading...