ATM SAS-2WA-48 Data Sheet

S U S P E N S I O N B E A M S Y S T E M

Two-Way-Array™

Suspension and Aiming for Two Cabinets

SWIVEL BEAM

S P E C I F I C A T I O N S :

Material:

Finish:

Color:

Working load limit:

Design factor:

Pack count:

S T A N D A R D F E A T U R E S :

• Modular approach to 2 speaker arrays

• Independent pan and tilt adjustment

• Expandable horizontally and vertically

• Fast predictable set up and aiming

• Ideal for permanent and live sound applications

• Off the shelf, ready-to-ship to the job site

• Load-rated structural steel tubing and fittings

• CG dependent, no chasing of angles

Structural steel alloy tube

Powder coat

Black and off-white

See table

10:1 ratio

1/carton

The Two-Way-Array™ is an easy to fly,

off the shelf loudspeaker aiming and

suspension system. It forms simple two

speaker clusters for small front-of-house

applications and forms, left and right

front-of-house clusters for larger venues.

™

The Two-Way-Array

also serves as an

excellent way to direct sound toward

two levels such as at a balcony with

one speaker and the floor level with the

other speaker. Multiple vertical tiers

™

of Two-Way-Array

can accomplish the

same for larger venues.

Ideal applications include theatres,

churches, school auditoriums,

gymnasiums and theme parks.

Multiple hole placements allow for many

combinations of dead hangs, down

tilts and pan angles, depending on the

specific sound coverage requirements

for very precise aiming of sound.

M O D E L # L E N G T H W E I G H T B E A M W W L

(inch/mm) (lb/Kg.) (lb/Kg.)

™

Two-Way-Arrays

can be coupled

together horizontally forming wider

arrays for more sound coverage. An

™

optional pivoting coupler, the Gridlink

connector, allows multiple Two-Way-

™

to be coupled together.

Arrays

The Two-Way-Array

™

Suspension

System can be outfitted with down

tilt devices such as our fixed width

U-Series mounts and Steerables™ Tilt

Cable Kits. These devices precisely

and independently adjust the speaker’s

tilt angle without affecting the pan or

tilt angles of other speaker cabinets in

the cluster. This means no

chasing of angles.

The Two-Way-Array

™

Suspension

System is produced from structural

steel tubing and uses domestically

load-rated suspension hardware to

assure a strong and

reliable installation.

O P T I O N A L A C C E S S O R I E S :

1. Steerables Tilt Cable system controls tilt angle

2. Fixed width, U-Bracket controls tilt angle

3. Expands horizontally with Gridlink™ Connector

4. Add-on suspension eyebolt kit

5. Bridle and suspension cables (standard and custom)

A division of:

ADAPTIVE TECHNOLOGIES GROUP

1637 E. Burnett Street
Signal Hill, CA 90755 USA
PH: 562.424.2200 FX: 562.424.1127

S U S P E N S I O N S O L U T I O N S

SAS-2WA-48 47.75/1213 34.00/15.5 550/250

SAS-2WA-66 65.75/1670 40.00/18.2 500/227

P A C K A G E C O N T E N T S :

1 pc. 48” or 66” Suspension Beam

2 pcs. Cross Arm

1 pc. Hardware Kit

1 set Load rated shackles and eyebolts

Cross Arm Working Load Limit: 300 lb/136 Kg.

Two-Way-Array max. Working Load Limit equals 600 lb/272 Kg.

w w w . a t m f l y w a r e . c o m

SWIVEL BEAM

Top View

MODEL #: A B C D E
SAS-2WA-48 47.75”/1213mm 9.26”/235mm 17.25”/438mm 3.00”/76mm 1.50”/38mm
SAS-2WA-66 65.75”/1670mm 9.26”/235mm 17.25”/438mm 3.00”/76mm 1.50”/38mm

Top View

MODEL #: A B C D E
SAS-2WA-48 47.75”/1213mm 9.26”/235mm 17.25”/438mm 3.00”/76mm 1.50”/38mm
SAS-2WA-66 65.75”/1670mm 9.26”/235mm 17.25”/438mm 3.00”/76mm 1.50”/38mm

Top View

S U S P E N S I O N B E A M S Y S T E M

Two-Way-Array™

Suspension and Aiming for Two Cabinets

D I M E N S I O N S :

T Y P I C A L C O N F I G U R A T I O N S :

Single Tier

1 wide

Front View

Single Tier

2 wide

Side View

Double Tier

2 wide

• In all cases above, each individual cabinet may be adjusted horizontally

or vertically without affecting the angle of the other cabinets

A division of:

ADAPTIVE TECHNOLOGIES GROUP

10/14/06 Version 27

1637 E. Burnett Street
Signal Hill, CA 90755 USA
PH: 562.424.2200 FX: 562.424.1127

S U S P E N S I O N S O L U T I O N S

w w w . a t m f l y w a r e . c o m

WARNING: Mounting and/or suspension loudspeakers

requires experienced professionals. Improperly installed
loudspeakers can result in property damage, personal
injury and/or liability to the installing contractor.

ALWAYS USE SAFETY CABLES.MADE IN THE USA