4K/UHD HDMI Over 100M HDBaseT TX/RX
with Ethernet, Control and PoE
AT-UHD-EX-100CE-KIT
AT-UHD-EX-100CE-RX
The Atlona AT-UHD-EX-100CE-KIT is an HDBaseT™ transmitter/receiver kit for HDMI transmission up to
328 feet (100 meters) over category cable with Ethernet pass through, RS-232 and IR control, plus Power
over Ethernet. This extender kit transmits video signals up to 4K/UHD @ 60Hz with embedded multichannel audio and remote 48V power for the receiver. Additionally, the kit extends Ethernet, RS-232, and
12 volt-based IR control commands. The kit is HDCP 2.2 compliant and supports EDID communication.
Both transmitter and receiver feature quarter rack width metal enclosures for easy rack mounting with rear
panel I/O ports for uncluttered wire management.
The AT-UHD-EX-100CE-KIT provides integrator-friendly features including: IEEE standards-based PoE
transmission for safety and compatibility; HDCP 2.2 compliant for meeting the latest copy protection
requirements; rack-mountable form factor for accommodating four transmitters in a single 1U rack tray;
power chaining for powering multiple devices from one power supply; and front mounted USB port for
easy firmware updates.
The AT-UHD-EX-100CE-KIT is ideal for use in residential or commercial point to point applications that
require greater HDBaseT signal transmission distance than the UHD-EX-70C can support. As a transmitter/
receiver pair, the kit can be used with the H2H matrix switcher and HDDA distribution amplifier series and
third party control systems for long distance AV signal and control extension with PoE capability. On its
own, the AT UHD-EX-100CE-RX receiver is compatible with the UHD-PRO3 Series, AT-UHD-CLSO-601 and
AT-UHD-SW-52ED.
4K/UHD capability -
• Compatible with Ultra High Definition sources and
displays
• Future proofs AV systems in preparation for
technology improvements, 4K/UHD streaming
services and playback devices
HDCP 2.2 compliant -
• Adheres to latest specification for High-bandwidth
Content Protection
• Allows protected content stream to pass between
devices
Remote-powered receiver -
• Industry standard IEEE 802.3af PoE for receiver is
supplied by transmitter over HDBaseT
• Saves time and integration costs
AV, Ethernet, power, and control over HDBaseT -
• Delivers 4K/UHD video, audio, 100Base-T Ethernet,
power, and control through a single cable
• Eliminates multiple cable runs between source,
control system, router, and display
Extended distance HDMI extension -
• Extended distance HDMI extension Transmits HDMI
signals up to 328 ft (100m) @ 1080P and 328 ft
(100m) @ 4K/UHD using CAT6a/7 cable
• Uses easy-to-integrate category cable for low-cost,
reliable system installation
70 Daggett Road, San Jose, CA 95134
tel: 408-962-0515, toll free: 1-877-536-3976, fax: 408-743-5622
©Atlona 2003-2015
atlona.com
4K/UHD HDMI Over 100M HDBaseT TX/RX
with Ethernet, Control and PoE
AT-UHD-EX-100CE-KIT
AT-UHD-EX-100CE-RX
Specifications
Video Resolutions
Video 4096x2160@24/25/30/50*/60Hz*, 3840x2160@24/25/30/50*/60Hz* (UHD), 2048x1080p,
1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz,
576p, 576i, 480p, 480i
VESA 2560x2048, 2560x1600, 2048x1536, 1920x1200, 1680x1050, 1600x1200, 1600x900,
1440x900, 1400x1050, 1366x768, 1360x768, 1280x1024, 1280x800, 1280x768, 1152x768,
1024x768, 800x600, 640x480
Colorspace YCbCr, RGB
Chroma Subsampling 4:4:4, 4:2:2, 4:2:0
Color depth 8-bit, 10-bit, 12-bit
Audio
Formats - pass through PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1, Dolby Digital Plus, Dolby TrueHD,
DTS-HD Master Audio, Dolby Atmos
Sample Rate 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
Bit rate up to 24-bit
Distance
CAT5e/6 @ 4K up to 70M up to 230 ft
CAT6a/7 @ 4K up to 100M up to 328 ft
CAT5e/6 @ 1080p up to 100M up to 328 ft
HDMI IN/OUT @ 4K up to 5M up to 15 ft
HDMI IN/OUT @ 1080p up to 10M up to 30 ft
Signal
Bandwidth 10.2 Gbps
CEC Yes
HDCP supports up to 2.2
Temperature
Operating 0°C to 50°C 32°F to 122°F
Storage -20°C to 60°C -4°F to 140°F
Humidity 20 to 90% non-condensing
Power
Consumption - Kit 15.2W
Supply Input: AC100~240V 50/60Hz
Output: DC48V 0.83A
Dimension
H x W x D 25 x 109 x 127 (mm) 0.98 x 4.29 x 5.00 (inch)
w/ears 27 x 119 x 127 (mm) 1.06 x 4.69 x 5.00 (inch)
Weight
Device 0.39 kg 0.86 lbs
Certification
Power Supply CE, FCC, cULus, RoHS, CCC, RCM
Product CE, FCC
**4096x2160@50/60Hz & 3840x2160@50/60Hz supported @ chroma subsampling 4:2:0 8-bit only
2.4 5
i
1
2
3
4
Router
345
1
IDFACTORY
ZIGBEE 12V DC
RESTORE
2
IR OUT
Control System
ROUTER
6
COMPONENT
HDMI
SERIAL 1
VIDEO OUT
SERIAL 2
-
DC 48V
WIFI 1
+
DIGITAL
COAX OUT
L
R
AUDIO OUT
Set top box
RX TX
RS-232
eSATA
ETHERNET
AUDIO IN
Specifications and availability subject to change without notice. Actual products, product images, and
online product images may vary from images shown here. Not responsible for typographical errors.
70 Daggett Road, San Jose, CA 95134
tel: 408-962-0515, toll free: 1-877-536-3976, fax: 408-743-5622
©Atlona 2003-2015
Video
HDBaseT
Control
Ethernet
FW
POWER
LINK
HDMI OUT
AT-UHD-EX-100CE-TX
POWER
IR IN
ETHERNET
S
P
S
HDBaseT IN
IR OUT
ETHERNET
S
S
HDBaseT OUT
IR OUT
IR IN
1 2 3 4
COM
COM
COM
COM
USB
NO
NO
NO
NO
NC
NC
NC
NC
RELAYS
WIFI 2
SIG
SIG
SIG
+12V
+12V
SIG
+12V
+12V
GND
GND
GND
GND
CONTACTS
FW
LINK
HDMI IN
AT-UHD-EX-100CE-RX
RX
TX
RS-232
atlona.com
Loading...