Atlona Technologies AT-UHD-CAT-4 Data Sheet

4K/UHD 4-Output HDMI to
HDBaseT Distribution Amplifier
AT-UHD-CAT-4
The Atlona AT-UHD-CAT-4 is a 4K/UHD HDMI to HDBaseT™ distribution amplifier featuring pass-through HDMI input connections, four HDBaseT outputs and display control capability. Each output transmits AV and control signals up to 230 ft. (70 m) @ 1080p and 130 ft. (40 m) @ 4K/UHD. Features include 4K/UHD @ 60 Hz with 4:2:0 color subsampling, HDCP 2.2 compliance, EDID management, and PoE for powering remote receivers. A wide variety of consumer and commercial displays may be controlled by the AT-UHD­CAT-4 using CEC, IR, or RS-232. Designed for commercial distribution applications, the AT-UHD-CAT-4 is control system-friendly and integrates with any TCP/IP, RS-232, or IR control system and features a 1U, half-rack width enclosure with external, international power supply. Compatible Atlona receiver: AT-UHD­EX-70C-RX.
Signal distribution applications increasingly require compatibility with HDCP 2.2, 4K/UHD @ 60 Hz support with 4:2:0 color subsampling to ensure images reach displays with compatible copy protection and with the pristine digital image quality of the original signal, without artifacts resulting from inferior image distribution systems. HDBaseT distribution ensures reliable, long-distance transmission of high resolution audio and video signals. These core features along with added display control provide additional flexibility. Power over Ethernet not only provides compatibility with Atlona Extender products but enables HDBaseT Certification.
Four HDBaseT outputs with transmission of AV and control signals and PoE -
• Long distance, 230 foot (70 m) outputs offer bidirectional extension of both RS-232 and IR control plus remote receiver power
Compatible Atlona receiver: AT-UHD-EX-70C-RX
• Reduces multiple, separate cable runs down to a single category cable per display, shrinking cable bundles and required conduit capacity to reduce cost of installation
Display control -
• CEC, IR or RS-232 control signals transmitted over HDBaseT
• Enables control of a wide variety of displays including commercial or low-cost consumer displays
HDMI distribution amplifier with built-in HDBaseT transmission -
• Combines signal distribution and long distance transmission into a single enclosure; eliminates several devices and power supplies
• Reduces overall system costs, speeds installation, and prevents compatibility issues 4K/UHD capability with HDCP 2.2 copy protection -
• Compatible with ultra-high definition sources and displays; adheres to latest content protection specification
• Ensures AV distribution systems are ready for 4K/ UHD streaming services and playback devices
70 Daggett Road, San Jose, CA 95134 US Toll-free: +1.408.962.0515, International: +41.43.508.4321 ©Atlona 2003-2016
atlona.com
41 2 3
EDID
LEARN
INT
POWER
AT-UHD-CAT-4
IN
HDMI
OUT
HDBaseT LOCK
4K/UHD 4-Output HDMI to
HDBaseT Distribution Amplifier
AT-UHD-CAT-4
Specifications
Video Resolutions
Video 4096x2160@24/25/30/50*/60Hz*, 3840x2160@24/25/30/50*/60Hz* (UHD), 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480i
VESA 2560x2048, 2560x1600, 2048x1536, 1920x1200, 1680x1050, 1600x1200, 1600x900, 1440x900, 1400x1050, 1366x768, 1360x768, 1280x1024, 1280x800, 1280x768, 1152x768, 1024x768, 800x600, 640x480
Color Space YUV, RGB Chroma Subsampling 4:4:4, 4:2:2, 4:2:0
Color Depth 8-bit, 10-bit, 12-bit
Audio
HDMI PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1, Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X Sample Rate 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz Bit Rate up to 24-bit
Distance
CAT5e/6 @ 4K up to 35 meters up to 115 feet CAT6a/7 @ 4K up to 40 meters up to 130 feet CAT5e/6 @ 1080p up to 60 meters up to 197 feet CAT6a/7 @ 1080p up to 70 meters up to 230 feet HDMI IN/OUT@ 4K up to 5 meters up to 15 feet HDMI IN/OUT @ 1080p up to 10 meters up to 30 feet
Signal
Bandwidth 10.2 Gbps CEC Compliant HDCP Compliant 2.2
Temperature
Operating 0°C to 50°C 32°F to 122°F Storage -20°C to 60°C -4°F to 140°F Humidity 20 to 90% non-condensing
Power
Consumption 52.8W Idle Consumption 12.54W Supply Input: AC100-240V ~ 50/60Hz Output: DC 48V/3.125A
Dimension
H x W x D 44 x 222.25 x 261 (mm) 1.73 x 8.75 x 10.28 (inch) Rack Unit 1/2 rack, 1RU
Weight
Device 1.66 kg 3.70 lbs
Certification
Unit CE, FCC Power Supply CE, FCC, Level VI, RoHS, cULus, RCM, CCC
*4096x2160@50/60Hz & 3840x2160@50/60Hz supported @ chroma subsampling 4:2:0 8-bit only
AT-UHD-EX-70C-RX
Control System
ZIGBEE 12V DC
MASTER
RS-232 IR
RX RXTX TX
LAN
HDMI
AT-UHD-SW-52
AT-UHD-SW-52
IDFACTORY
RESTORE
HDMI 1
HDMI 2
HDMI 3
HDMI 4
HDMI 5
345
1
SERIAL 1
6
2
IR OUT
SERIAL 2
RS-232
RX RXTX RX TX RX TX RX TXTX
1OUTIN 2
VOLUME
HDMI
VIDEO OUT
1
RS-232
POWER
COMPONENT
2
INPUT
WIFI 1
IR
RXTX
COAX OUT
AUDIO OUT
HDBaseT OUT
L
R
RS-232
1 2 3 4
COM
COM
COM
eSATADIGITAL
NO
NO
NC
NC
SIG
+12V
SIG
+12V
+12V
GND
ETHERNET
IR
RXTX
3 4
GND
RS-232IR
AUDIO IN
3 4
COM
NO
NO
NC
NC
RELAYS
WIFI 2
SIG
SIG
+12V
GND
GND
CONTACTS
IR
RXTX
DC 48V
AT-UHD-CAT-4
TX
P
RX
S
RS-232
AT-UHD-EX-70C-RX
FW
IR IN
AT-UHD-EX-70C-RX
POWER
LINK
FW
S
HDMI OUT
HDBaseT IN
IR OUT
S
TX
P
RX
S
IR OUT
RS-232
IR IN
AT-UHD-EX-70C-RX
AT-UHD-EX-70C-RX
POWER
LINK
FW
HDMI OUT
HDBaseT IN
S
TX
P
RX
S
HDBaseT IN
IR OUT
RS-232
IR IN
TX
RX
RS-232
AT-UHD-EX-70C-RX
IR IN
AT-UHD-EX-70C-RX
FW
HDMI OUT
P
S
POWER
LINK
AT-UHD-EX-70C-RX
POWER
LINK
FW
S
HDMI OUT
HDBaseT IN
IR OUT
Specifications and availability subject to change without notice. Actual products, product images, and online product images may vary from images shown here. Not responsible for typographical errors.
Video
HDBaseT
Control
70 Daggett Road, San Jose, CA 95134 US Toll-free: +1.408.962.0515, International: +41.43.508.4321 ©Atlona 2003-2016
atlona.com
Loading...