Atlona Technologies AT-OMNI-111, AT-OMNI-121, AT-OMNI-122 User Manual

OmniStream
Single-Channel / Dual-Channel
Networked AV Encoder / Decoder
AT-OMNI-112
AT-OMNI-122
AT-OMNI-111
AT-OMNI-121
Introduction
OmniStream is an all-new AV over IP product family from Atlona for distributing 4K video, audio, and control over a standard Gigabit network. It delivers the performance and dependability of traditional AV distribution, with the
virtually unlimited scalability, security, and cost eciency of integrating over IP networks.
OmniStream was engineered from the ground up at Atlona with several industry-exclusive capabilities including high density encoding and decoding, redundant AV networks and streams, secure content distribution, network error resilience, critical-quality 4K video compression with extremely low latency, and audio distribution.
Atlona specically developed OmniStream to address the many technological and practical challenges associated
with converging video onto IP networks. OmniStream is designed to integrate easily into a new or existing Gigabit network infrastructure, and deliver the same reliability, performance, and image quality expected of a baseband or HDBaseT™ video system.
Applications
Enterprises and other large organizations
Corporate and university campuses with the need to distribute AV between buildings
Applications in which any AV content or resource can be shared anywhere in the system
AT-OMNI-111 AT-OMNI-112 AT-OMNI-121 AT-OMNI-122
1
Key Features
OmniStream
Single-Channel / Dual-Channel
Networked AV Encoder / Decoder
Supports HDMI video up to 4K/UHD, plus audio and RS-232 control
4K @ 24 Hz, UHD @ 30 Hz, and 1080p @ 60 Hz.
Video, audio, and RS-232 can be routed together or independently .
High density video over IP integration
Dual channel units can process two independent services per chassis.
Networked AV redundancy
Replicate AV over two separate networks and IP
streams – a rst for the pro AV industry.
Enables 99.9% system failover for mission-critical applications.
Control
RS-232, Telnet, SSH, and JSON over WebSockets.
Easy Setup with AMS
Automatic discovery with IP address conguration.
Helps get the system owing video in no time.
Secure content distribution
AV presentation content can be encrypted to prevent unauthorized access.
Supports HDCP.
Standard Gigabit network infrastructure
Works with standard, o-the-shelf Gigabit managed switches from Cisco and others.
Can easily be integrated into existing network infrastructures.
Design highly exible and scalable AV systems
No theoretical limitations on I/O size, switching capacity, or transmission distance.
“Virtual matrix” – can route any source to any destination, anywhere on the network.
Easily add sources, displays, and additional switches as needed.
Power over Ethernet
Works with standard, o-the-shelf Gigabit managed switches from Cisco and others.
Audio embedding and de-embedding* plus multichannel audio downmixing
Integrate with a Dante-equipped DSP via an OmniStream 232, or with a local audio source or sound reinforcement.
Multi-channel PCM audio can be downmixed to two channels.
Simplies system designs and avoids the need for additional audio signal processing and interfacing devices.
Professional visually lossless video compression using VC-2 Highly robust and reliable over IP networks
SMPTE FEC (forward error correction) for very high resilience to network errors.
Ensures reliability and dependability of traditional video and audio routing platforms.
Extremely low latency of less than 0.5 frame from encode to decode
< 8 ms for 60 Hz video – lowest in the proAV industry.
* Optional AT-PS-48083-C power supply is required for analog audio outputs.
Local or PoE (Power over Ethernet) powering
With PoE, decoders can conveniently be powered over the network from a PoE-equipped network switch.
PoE simplies integration without the need for local AC power, and allows centralized power monitoring and management
Optional AT-PS-48083-C power supply available and is required for analog audio outputs
AT-OMNI-111 AT-OMNI-112 AT-OMNI-121 AT-OMNI-122
2
OmniStream
Single-Channel / Dual-Channel
Networked AV Encoder / Decoder
Connection Diagrams
AT-OMNI-111 / AT-OMNI-112 AT-OMNI-121 / AT-OMNI-122
Automation Control System
AT-OMNI-112
1
FACTORY
2
RESET
IR OUT
48V DC
2 1
1
AT-OMNI-112
Video
Blu-ray Player
+
-
AT-OMNI-111
DC 48V
RXTX
1
NO
COM
NC
2 3 4
NO COM NC
1
NO
COM
NC
NO COM NC
GND
+12V
SIG
GND +12V SIG
GND
+12V
SIG
GND +12V SIG
ETHERNET
L
Control
DIGITAL
R
COAX OUT
COMPONENT
AUDIO OUT AUDIO IN
HDMI
VIDEO OUT
SERIAL 1
5
3
6
SERIAL 2
4
+
-
DC 48V
RXTX
1
2
Control
RS-232
2
ETHERNETHDMI IN
Video
Ethernet
Ethernet
RS-232
ETHERNETHDMI
AT-OMNI-111
Video
Ethernet
DVD Player
LAN
Automation Control System
AT-OMNI-112
Display
NO COM NC
2 3 4
NO COM NC
1
NO COM
NC NO COM NC
GND +12V
SIG GND +12V SIG
GND +12V
SIG GND +12V SIG
ETHERNET
L
DIGITAL
R
COAX OUT
COMPONENT
AUDIO OUT AUDIO IN
HDMI
VIDEO OUT
SERIAL 1
5
3
6
1
SERIAL 2
4
FACTORY
2
RESET
IR OUT
Control
DC 48V
TX
1
RX
2
RS-232
21
ETHERNET
Ethernet
Ethernet
Video
AT-OMNI-112
Video
2
HDMI IN
1
Blu-ray Player
Laptop
Video
Display
Video
Laptop
Audio
Audio
AT-OMNI-122
R 2
L
R
1
L
DC 48V
IN
AUDIO
TX
OUT
1
RX
2
RS-232
2
ETHERNET
1
2
HDMI OUT
1
AT-OMNI-122
Ethernet
Ethernet
LAN
Specications
Video
Video 4096x2160@24Hz, 3840x2160@24/25/30Hz (UHD), 1080p@23.98/24/25/29.97/30/50/59.94/60Hz,
VESA* 1920x1200, 1680x1050, 1600x1200, 1600x900, 1440x900, 1400x1050, 1366x768, 1360x768,
Codec VC-2
Latency 0.5 frames (e.g. 1080p@60Hz latency is < 8 ms)
Bitrate Up to 900 Mbps
Color Space YUV, RGB
Chroma Subsampling 4:4:4, 4:4:2
Color Depth 8-bit, 10-bit, 12-bit
Scaling Up / down-conversion
1080i@25/29.97/30Hz, 720p@30/50/59.94/60Hz
1280x1024, 1280x800, 1280x768, 1152x768, 1024x768
Note: Unusual network congurations may increase overall latency
Audio
Digital In / Out LPCM 2.0, LPCM 5.1, LPCM 7.1, Dolby® Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos®,
DTS®, DTS-HD Master Audio™
Analog Audio 2-channel balanced input / output
Sample Rate 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
Bit Rate 24-bit (max.)
Control
Protocols RS-232, Telnet, SSH, JSON over WebSockets
AT-OMNI-111 AT-OMNI-112 AT-OMNI-121 AT-OMNI-122
3
OmniStream
Single-Channel / Dual-Channel
Networked AV Encoder / Decoder
Distance Feet Meters
Per hop of Ethernet cable 330 100
Signal
CEC Yes; display, volume, power, input
HDCP 1.4 switchable, hardware capable 2.2
Scrambling AES-128
IP
Protocol RTP
Ethernet Speed 10/100/1000 Mbp/s
Addressing DHCP, static
QoS tagging RFC 2475
FEC SMPTE 2022-5:2013; Columns: 1 to 20; Rows: 4 to 20
RS-232
Baud Rate 2400 to 115200 bps
Connector Molex, 3-pin x 2
Temperature Fahrenheit Celsius
Operating 32 to 122 0 to 50
Storage -4 to 140 -20 to 60
Humidity (RH) 20% to 90% (non-condensing)
Power
Consumption ~13 W (w/o analog audio), TBD (w/ analog audio)
Supply (optional) Input: 85 V ~ 264 V AC 50/60 Hz, Output: 48 V DC, 0.83 A
SKU AT-PS-48083-C
Dimensions Inches Millimeters
H x W x D 1.34 x 8.19 x 4.41 34 x 208 x 112
Weight Kilograms Pounds
Single channel TBD TBD
Dual-channel 0.7 1.54
Certication
Power Supply CE, FCC, cULus, RoHS, RCM
Product CE, FCC, RoHS
*All VESA resolutions are 60p.
© 2017 Atlona Inc. All rights reserved. “Atlona” and the Atlona logo are registered trademarks of Atlona Inc. All other brand names and trademarks or registered trademarks are the property of their respective owners. Pricing, specications and availability
subject to change without notice. Actual products, product images, and online product images may vary from images shown here.
atlona.com • 408.962.0515 • 877.536.3976
4
Loading...