Page 1
4K/UHD HDMI Over 100M HDBaseT Transmitter
with Ethernet, Control, and PoE
AT-UHD-EX-100CE-TX
The Atlona AT-UHD-EX-100CE-TX is an HDBaseT™ transmitter for HDMI transmission up to 328 feet (100
meters) over category cable with Ethernet pass through, plus RS-232 and IR control. Designed to work
with HDBaseT inputs on switchers and projectors, this extender transmits video signals up to 4K/UHD @
60Hz with embedded multi-channel audio. Additionally, the transmitter extends Ethernet, RS-232, and
12 volt-based IR control commands. The AT-UHD-EX-100CE-TX is HDCP 2.2 compliant and supports EDID
communication. The transmitter features a quarter rack width metal enclosure for easy rack mounting
with rear panel I/O ports for uncluttered wire management. This PSE (Power Sourcing Equipment) device
is externally powered, includes a desktop power supply and provides Power over Ethernet for compatible
receiving devices. The AT-UHD-EX-100CE-TX is certified by the HDBaseT Alliance.
This HDBaseT Class A transmitter is designed to support the growing number of displays and video
projectors in the commercial market with HDBaseT inputs. The AT-UHD-EX-100CE-TX provides extended
distance, transmission of uncompressed, 4K/UHD HDMI signals from switchers and matrixes. Other
applications include remote input signal transmission for the AT-UHD-CLSO-824 matrix switcher. Built-in
Ethernet and bi-directional control signal extension eliminates the need for additional cabling from switcher
to the display or remote input device. Installer-friendly features include: a rack-mountable form factor
that allows four transmitters to share a single, 1U rack tray; power chaining to allow multiple sets to be
powered from one power supply; and a front mounted USB port for easy firmware updates.
The AT-UHD-EX-100CE-TX is ideal for use in commercial point to point applications that require extended
distance HDMI signal transmission to HDBaseT-equipped displays. The transmitter can be used with any
4K/UHD switcher, matrix switcher, or distribution amplifier. Support for multiple control signals allows the
transmitter to work with a variety of third-party control systems to cost-effectively extend control signals
within a system.
4K/UHD capability -
• Compatible with Ultra High Definition sources and
displays
• Future proofs AV systems in preparation for
technology improvements, 4K/UHD streaming
services and playback devices
HDCP 2.2 compliant -
• Adheres to latest specification for High-bandwidth
Digital Content Protection
• Allows protected content to pass between devices
PSE – Power Sourcing Equipment -
• Uses external power supply (included)
• Eliminates the need for remote power or power injection devices
AV, Ethernet, power, and control over HDBaseT -
• Delivers 4K/UHD video, audio, 100BaseT Ethernet,
power, and control through a single cable
• Eliminates multiple cable runs between source,
control system, router, and display
Extended distance HDMI extension -
• Transmits HDMI signals up to 328 ft (100m) @
1080P and 328 ft (100m) @ 4K/UHD using CAT6a/7
cable
• Uses easy-to-integrate category cable for low-cost,
reliable system installation
70 Daggett Road, San Jose, CA 95134
tel: 408-962-0515, toll free: 1-877-536-3976, fax: 408-743-5622
©Atlona 2003-2015
atlona.com
Page 2
4K/UHD HDMI Over 100M HDBaseT Transmitter
AT-UHD-H2H-44M
EDID
POWER ENTER
FNC CANCEL INFO
1
2
43
with Ethernet, Control, and PoE
AT-UHD-EX-100CE-TX
Specifications
Video Resolutions
Video 4096x2160@24/25/30/50*/60Hz*, 3840x2160@24/25/30/50*/60Hz* (UHD), 2048x1080p,
1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz,
576p, 576i, 480p, 480i
VESA 2560x2048, 2560x1600, 2048x1536, 1920x1200, 1680x1050, 1600x1200, 1600x900,
1440x900, 1400x1050, 1366x768, 1360x768, 1280x1024, 1280x800, 1280x768, 1152x768,
1024x768, 800x600, 640x480
Color Space YUV, RGB
Chroma Subsampling 4:4:4, 4:2:2, 4:2:0
Color Depth 8-bit, 10-bit, 12-bit
Audio
Formats PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1, Dolby Digital Plus, Dolby TrueHD,
DTS-HD Master Audio, Dolby Atmos
Sample Rate 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
Bit Rate up to 24-bit
Distance
CAT5e/6 @ 4K up to 70M up to 230 ft
CAT6a/7 @ 4K up to 100M up to 328 ft
CAT5e/6 @ 1080p up to 100M up to 328 ft
HDMI IN/OUT @ 4K up to 5M up to 15 ft
HDMI IN/OUT @ 1080p up to 10M up to 30 ft
Signal
Bandwidth 10.2 Gbps
CEC Yes
HDCP supports up to 2.2
Temperature
Operating 0°C to 50°C 32°F to 122°F
Storage -20°C to 60°C -4°F to 140°F
Humidity 20 to 90% non-condensing
Power
Consumption 15.2W (when paired with a RX)
Supply Input: AC100~240V 50/60Hz
Output: DC48V 0.83A
Dimension
H x W x D 25 x 109 x 127 (mm) 0.98 x 4.29 x 5.00 (inch)
H x W x D w/ears 27 x 119 x 127 (mm) 1.06 x 4.69 x 5.00 (inch)
Weight
Device 0.39 kg 0.86 lbs
Certification
Power Supply CE, FCC, cULus, RoHS, CCC, RCM
Product CE, FCC
**4096x2160@50/60Hz & 3840x2160@50/60Hz supported @ chroma subsampling 4:2:0 8-bit only
Video
HDBaseT
Control
Ethernet
Set Top Box
1 2
HDMI IN
Blu-Ray Player
3
Media Player
IR IN
4
1 2 3 4
HDMI OUT
LAN
RS-232
FW
RXTX
S
DC 12V
345
1
IDFACTORY
ZIGBEE 12V DC
RESTORE
SERIAL 1
6
2
IR OUT
SERIAL 2
DIGITAL
COMPONENT
WIFI 1
HDMI
COAX OUT
VIDEO OUT
AUDIO OUT
USB
eSATA
ETHERNET
L
R
AUDIO IN
Control System
Specifications and availability subject to change without notice. Actual products, product images, and
online product images may vary from images shown here. Not responsible for typographical errors.
70 Daggett Road, San Jose, CA 95134
tel: 408-962-0515, toll free: 1-877-536-3976, fax: 408-743-5622
©Atlona 2003-2015
1 2 3 4
COM
NC
SIG
+12V
AT-UHD-EX-100CE-TX
2.4 5
ROUTER
i
COM
COM
COM
NO
NO
NO
NO
NC
NC
NC
RELAYS
WIFI 2
SIG
SIG
SIG
+12V
+12V
+12V
GND
GND
GND
GND
CONTACTS
1
2
3
4
Router
ETHERNET
+
-
RX TX
RS-232
DC 48V
S
S
HDBaseT OUT
IR OUT
IR IN
POWER
FW
LINK
HDMI IN
atlona.com
Loading...