Atlona Scaler Box is designed to upscale digital/analog video signal from Composite, S-Video, PC, Component
(HD) and HDMI input sources, to digital HDMI output of wide-range HDTV and PC resolutions, up to 1080p
and WUXGA (1920 x 1200.) Besides video upscaling, the scaler box also converts digital/analog audio signal
to digital format, then output either through HDMI combining with the video, or Coaxial S/PDIF separately.
AT-LINE-PRO2 has a comprehensive OSD menu that allows user to select a variety of output resolutions and
adjust for best picture quality.
FEATURES
• HDMI 1.2, HDCP 1.1 and DVI 1.0 compliant.
• Scales any PC (VGA ~ WUXGA) /HD (480i ~ 1080p) resolutions to/from another PC/HD resolutions.
• Automatically detect the factory setting of the connected display and output the corresponding resolution
and refresh rate, when the NATIVE output is selected.
• Supports 50/60Hz frame rate conversion.
• Supports 3-D motion video adaptive, 3-D de-interlacing, and 3:2 / 2:2 pull-down detection and recovery.
• Supports digital and analog audio input and output.
PACKAGE CONTENTS
• Atlona AT-LINE-PRO2 Scaler Box
• D-Sub (15pin) Cable
• 3XRCA Cable (Composite Video + L/R Audio)
• Remote Controller
• 5VDC Power Supply Adaptor
• Operation Manual
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
OPERATION CONTROLS AND FUNCTIONS
3
4.1 Front Panel
123456
1. POWER Button and LED Indicator:
Press the button to turn ON/OFF the power of the unit. The LED will illuminate when the power is
turned on.
2. IR remote control sensor.
3. Input Selection Buttons and LED Indicators:
Press each of the buttons (CV/SV/COMP/PC/HDMI) to select the desired input source.
The LED will illuminate when the corresponding input is selected.
4. MENU Button:
Press the MENU button to bring up OSD operation menu (see section “4.3 OSD Operation”for reference.)
5. +/- Buttons:
On the first tier of OSD menu, use + and - buttons to move up/down the highlight item for selection.
b. Once the desired option is selected, use + and - buttons to toggle between setting values.
6. ENTER Button:
In OSD menu, use the ENTER button to confirm the selection
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
4.2. Rear Panel
4
135689
1. HDMI OUT and CO-AX OUT:
Connect the HDMI OUT port to the HDMI input port of your display such as HDTV. Connect the CO-AX
OUT port to the Coaxial (S/PDIF) input port of your amplifier for separate digital audio output.
2. AUX IN Input:
When the video signal input through the HDMI IN port is from a DVI source such as a PC, use the AUX IN
port to input the audio signal.
3. HDMI IN Input:
Connect the HDMI IN port to the HDMI output port of your source equipment such as DVD player or SetTop-Box. Or, use HDMI to DVI cable to connect to the DVI output of your PC.
4. RS-232:
Used for remote control and firmware updates.
5. PC IN for Video and Audio Input:
Connect the PC IN D-Sub (15-pin) port to the D-Sub output port of your PC. And, connect the PC IN
3.5mm phone jack to the audio output port of your PC.
6. Y Pb/Cb Pr/Cr Video and L/R Audio Input:
Connect the Y Pb/Cb Pr/Cr (Component) 3 RCA input ports to the Component output port of your video
source equipment such as DVD player or Set-Top-Box. And, connect the L/R audio input ports to the audio output port of your audio source equipment.
7. CO-AX Input:
The CO-AX port provides the digital audio input support, and can be used to combine with each video
input signals from CV/SV/COMP/PC/HDMI ports. Once connected, please use the Audio Source Selection
in the OSD menu to select between Coaxial (S/PDIF) or other audio source (see section “4.3 OSD Operation” for reference.)
8. Composite Video / S-Video and L/R Audio Input:
Connect the Composite or S-Video input port to the Composite or S-Video output port of your video
source equipment such as DVD player or Set-Top-Box. And, connect the L/R audio input ports to the audio output port of your audio source equipment.
9. Power:
Plug the 5VDC power supply into the unit and connect the adaptor to AC wall outlet.
742
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
4.3. OSD Operation
5
1st Tier Option2nd Tier OptionAdjustment
VIDEOPICTURE MODEUSER / STANDARD / VIVID / MOVIE
CONTRAST0 ~ 100 of Contrast Level
BRIGHTNESS0 ~ 100 of Brightness Level
HUE0 ~ 100 of Hue Level
SATURATION0 ~ 100 of Saturation Level
SHARPNESS0 ~ 100 of Sharpness Level
SCALEOVERSCAN / UNDERSCAN / LETTERBOX / PANS-
CAN / FULL
NRLOW / MIDDLE / HIGH / OFF
EXITBack to the 1st Tie
COLORCOLOR TONEUSER / NORMAL / WARM / COOL
RED0 ~ 100 of Red Color Level
GREEN0 ~ 100 of Green Color Level
BLUE0 ~ 100 of Blue Color Level
EXITBack to the 1st Tier
VPOSITION0 ~ 100 of OSD Vertical Position
TIMER0 ~ 100 of OSD Show Time (sec.)
TRANSP0 ~ 100 of OSD Transparent Level
EXITBack to the 1st Tier
AUDIOSOURCEHDMI / L/R / COAXIAL
DELAYOFF / 40MS / 110MS / 150 MS
SOUNDON / MUTE
EXITBack to the 1st Tier
INFORMATION-SOURCE (Input interface)
INPUT (Input Resolution)
OUTPUT (Output Resolution)
VERSION (Firmware Version)
EXIT-Close the OSD Menu
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
4.4. Remote Control
6
1. POWER:
Press the button once to power on the AT-LINE-PRO2.
Press again to enter standby mode.
2. INPUT:
Press the button repeatedly to toggle through various input sources.
3. HD Input:
Press the button to directly select component input.
4. PC Input:
Press the button to directly select PC input.
5. HDMI/DVI Input:
Press the button to directly select DVI (or HDMI) input.
6. Output Resolution:
Press any one of the button to directly select output resolution.
For other output resolutions that are not covered by these buttons
please enter OSD Menu to select them.
7. MENU:
Press the button to bring up OSD main menu page.
8. Exit:
Press the button to exit from a sub menu or main menu.
9. Up/Down/Left/Right:
Press the Up/Down button to move the highlight bar to your desired parameter during the OSD operation. Press the Left/Right button to increase/decrease the setting value of a selected parameter.
10. OK (Enter):
Press the button to confirm your selection.
11. Reset:
Press the button to reset the unit’s firmware setting to the factory default value.
12. Auto Adjust:
Press the button to optimize the position of the picture (picture centering) on the screen
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
LINE-PRO2 RS-232 REMOTE CONTROL PROTOCOL
7
* The connection between AT-LINE-PRO2 and remote controller with RS-232 modem cable.
* RS-232 transmission format:
Baud Rate: 19200 bps
Data Bit: 8 bits
Parity: None
Stop Bit: 1 bi
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
(A) Set Commend:
8
Command CodeResponseDescription
S POWER 0> POWER OFFPOWER OFF
S POWER 1> POWER ONPOWER ON
S SOURCE 0> SOURCE CVCV INPUT
S SOURCE 1> SOURCE SVSV INPUT
S SOURCE 2> SOURCE COMPCOMP INPUT
S SOURCE 3> SOURCE PCPC INPUT
S SOURCE 4> SOURCE HDMIHDMI INPUT
S OUTPUT 0> OUTPUT NATIVENATIVE RESOLUTION OUTPUT
S OUTPUT 1> OUTPUT VGAVGA RESOLUTION OUTPUT
S OUTPUT 2> OUTPUT SVGASVGA RESOLUTION OUTPUT
S OUTPUT 3> OUTPUT XGAXGA RESOLUTION OUTPUT
S OUTPUT 4> OUTPUT SXGASXGA RESOLUTION OUTPUT
S OUTPUT 5> OUTPUT UXGAUXGA RESOLUTION OUTPUT
S OUTPUT 6> OUTPUT 480i480i RESOLUTION OUTPUT
S OUTPUT 7> OUTPUT 480P480P RESOLUTION OUTPUT
S OUTPUT 8> OUTPUT 720P720P 60HZ RESOLUTION OUTPUT
S OUTPUT 9> OUTPUT 1080i1080i 60HZ RESOLUTION OUTPUT
S OUTPUT 10>OUTPUT 1080P1080P 60HZ RESOLUTION OUTPUT
S OUTPUT 11> OUTPUT 576i576i 60HZ RESOLUTION OUTPUT
S OUTPUT 12> OUTPUT 576P576P 60HZ RESOLUTION OUTPUT
S OUTPUT 13> OUTPUT 720P720P 50HZ RESOLUTION OUTPUT
S OUTPUT 14> OUTPUT 1080i501080i 50HZ RESOLUTION OUTPUT
S OUTPUT 15> OUTPUT 1080P501080P 50HZ RESOLUTION OUTPUT
S OUTPUT 16> OUTPUT WXGAWXGA RESOLUTION OUTPUT
S OUTPUT 17> OUTPUT WSXGAWSXGA RESOLUTION OUTPUT
S OUTPUT 18> OUTPUT WUXGAWUXGA RESOLUTION OUTPUT
S SIZE 0> SIZE FULLSCALER FULL OUTPUT
S SIZE 1> SIZE OVERSCANSCALER OVERSCAN OUTPUT
S SIZE 2> SIZE UNDERSCANSCALER UNDERSCAN OUTPUT
S SIZE 3> SIZE LETTERBOXSCALER LETTERBOX OUTPUT
S SIZE 4> SIZE PANSCANSCALER PANSCAN OUTPUT
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Command CodeResponseDescription
9
S PICTURE MODE 0-3> PICTUREMODE STANDARD-
USER
S CONTRAST 0-100> CONTRAST 0-100CONTRAST 0-100 ADJUST [Defaut:50]
S BRIGHTNESS 0-100> BRIGHTNESS 0-100BRIGHTNESS 0-100 ADJUST [Defaut:45]
S HUE 0-100> HUE 0-100HUE 0-100 ADJUST [Defaut:50]
S SATURATION 0-100> SATURATION 0-100SATURATION 0-100 ADJUST [Defaut:60]
S SHARPNESS 0-100> SHARPNESS 0-100SHARPNESS 0-100 ADJUST [Defaut:32]
S NR 0-3> NR OFF-HIGH0:OFF; l:LOW; 2:MIDDLE; 3:HIGH, NR CONTROL
S PCHPOSITION 0-100> PCHPOSITION 0-100H POSITION 0-100 ADJUST
S PCVPOSITION 0-100> PCVPOSITION 0-100V POSITION 0-100 ADJUST
S PCCLOCK 0-100> PCCLOCK 0-100PC MODE COLCK 0-100 ADJUST
S PCPHASE 0-63> PCPHASE 0-63PC MODE PHASE 0-63 ADJUST
S COLORTEMP 0-3> COLORTEMP NORMAL-USER 0:NORMAL; 1:WARM; 2:COOL;
S RED 0-100> RED 0-100COLOR TEMP “RED” ADJUST [Defaut:47]
S GREEN 0-100> GREEN 0-100COLOR TEMP “GREEN” ADJUST [Defaut:47]
S BLUE 0-100> BLUE 0-100COLOR TEMP “BLUE” ADJUST [Defaut:47]
SOSDHPOSITION 0-100> OSDHPOSITION 0-100OSD H POSITION 0-100 ADJUST [Defaut:50]
S OSDVPOSITION 0-100> OSDVPOSITION 0-100OSD V POSITION 0-100 ADJUST [Defaut:50]
S OSDTIMEOUT 0-100> OSDTIMEOUT 0-100OSD TIMEOUT 0-100 SETTING [Defaut: 10]
S OSDBACKGROUND 0-8 > OSDBACKGROUND 0-8OSD OSDBACKGROUND 0-8 ADJUST [Defaut:5]
S AUDIOMUTE 0-1> AUDIOMUTE OFF-ON0:OFF; 1 :ON, AUDIO MUTE CONTROL
S AUDIODELAY 0-3> AUDIODELAY OFF-l 50MS0:OFF; 1:40MS; 2:110MS; 3:150MS,
AUDIO DELAY SETTING
S RESET 1> RESET ONRESET ACTION
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
(B) Status Commend
10
Command CodeResponseDescription
R POWER> POWER ONSHOW POWER STATUS
R SOURCE> SOURCE CV-HDMISHOW SOURCE STATUS
R OUTPUT> OUTPUT NATIVE-WUXGASHOW OUTPUT STATUS
R SIZE> SIZE FULL-PANSCANSHOW SIZE STATUS
R PICTUREMODE> PICTUREMODE STANDARD-USER SHOW PICTURE MODE STATUS
R CONTRAST> CONTRAST 0-100SHOW CONTRAST STATUS
R BRIGHTNESS> BRIGHTNESS 0-100SHOW BRIGHTNESS STATUS
R HUE> HUE 0-100SHOW HUE STATUS
R SATURATION> SATURATION 0-100SHOW SATURATION STATUS
R SHARPNESS> SHARPNESS 0-100SHOW SHARPNESS STATUS
R NR> NR OFF-HIGHSHOW NR STATUS
R PCHPOSITION> PCHPOSITION 0-100SHOW PC H-POSITION STATUS
R PCVPOSITION> PCVPOSITION 0-100SHOW PC V-POSITION STATUS
R PCCLOCK> PCCLOCK 0-100SHOW PC COLOK STATUS
R PCPHASE> PCPHASE 0-63SHOW PC PHASE STATUS
R COLORTEMP> COLORTEMP NORMAL-USERSHOW COLOR TEMP STATUS
R RED> RED 0-100SHOW COLOR TEMP RED STATUS
R GREEN> GREEN 0-100SHOW COLOR TEMP GREEN STATUS
R BLUE> BLUE 0-100SHOW COLOR TEMP BLUE STATUS
R OSDHPOSITION> OSDHPOSITION 0-100SHOW OSD H-POSITION STATUS
R OSDVPOSITION> OSDVPOSITION 0-100SHOW OSD V-POSITION STATUS
R OSDTIMEOUT> OSDTIMEOUT 0-100SHOW OSD TIMEOUT STATUS
R OSDBACKGROUND> OSDBACKGROUND 0-8SHOW OSD BACKGROUND STATUS
R AUDIOMUTE> AUDIOMUTE OFF-ONSHOW AUDIO MUTE STATUS
R AUDIODELAY> AUDIODELAY QFF-150MSSHOW AUDIO DELAY STATUS
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
SPECIFICATIONS
11
6.1. General Specification
• Frequency bandwidth: 1.65Gbps (single link)
• Input Ports: Composite x 1 / L7R x 1 S-Video x 1 / L/R x 1 Component (3 RCA) x 1 / UR x 1 PC D-Sub
(15-pin) x 1 / 3.5mm Phone Jack x 1 HDMI x 1 / 3.5mm Phone Jack x 1 (for DVI) Coaxial (S/PDIF) x 1
UXGA@60v
WXGA@60( 1280X800)v
WSXGA@60( 1680X1050)v
WUXGA@60( 1920X1200) v
* : 480i@30x2 / 576i@30x2
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
CONNECTION AND INSTALLATION
12
Resetting the device to original settings: While the unit is plugged in to the Power Supply:
1. Press and hold the MENU button.
2. Unplug the Power Supply from the backand wait 5 seconds.
3. Plug the Power Supply back in and release the MENU button.
4. The unit should now be reset to its default settings
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
SAFETY INFORMATION
13
Safeguards
To reduce the risk of electric shock, do not
expose this product to rain or moisture
If the wall plug does not fit into your local
power socket, hire an electrician to replace
your obsolete socket.
Precautions
FCC regulations state that any unauthorized changes or modifications to this equipment, not expressly
approved by the manufacturer, could void the user’s authority to operate this equipment.
Operate this product using only the included external power supply. Use of other power supplies could impair
performance, damage the product, or cause fires.
In the event of an electrostatic discharge this device may automatically turn off. If this occurs, unplug the device
and plug it back in.
Protect and route power cords so they will not be stepped on or pinched by anything placed on or against
them. Be especially careful of plug-ins or cord exit points from this product.
Do not modify the wall plug. Doing so will
void the warranty and safety features.
This equipment should be installed near
the socket outlet and the device should
be easily accessible in the case it requires
disconnection.
Avoid excessive humidity, sudden temperature changes or temperature extremes.
Keep this product away from wet locations such as bathtubs, sinks, laundries, wet basements, fish tanks, and
swimming pools.
Use only accessories recommended by Atlona to avoid fire, shock, or other hazards.
Unplug the product before cleaning. Use a damp cloth for cleaning and not cleaning fluid or aerosols.
Such products could enter the unit and cause damage, fire, or electric shock. Some substances may also
mar the finish of the product.
Never open, remove unit panels, or make any adjustments not described in this manual. Attempting to
do so could expose you to dangerous electrical shock or other hazards. It may also cause damage to your
AT-LINE-PRO2. Opening the product will void the warranty.
Do not attempt to service the unit. Disconnect the product and contact your authorized Atlona reseller or
contact Atlona directly.
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Atlona, Inc. (“Atlona”) Limited Product Warranty Policy
14
Coverage
Atlona warrants its products will substantially perform to their published specifications and will be free from defects in
materials and workmanship under normal use, conditions and service.
Under its Limited Product Warranty, Atlona, at its sole discretion, will either:
A) repair or facilitate the repair of defective products within a reasonable period of time, restore products to their
proper operating condition and return defective products free of any charge for necessary parts, labor and shipping
OR
B) replace and return, free of charge, any defective products with direct replacement or with similar products deemed
by Atlona to perform substantially the same function as the original products
OR
C) refund the pro-rated value based on the remaining term of the warranty period, not to exceed MSRP, in cases
where products are beyond repair and/or no direct or substantially similar replacement products exist.
Repair, replacement or refund of Atlona’s products is the purchaser’s exclusive remedy and Atlona’s liability does not
extend to any other damages, incidental, consequential or otherwise.
This Limited Product Warranty extends to the original end-user purchaser of Atlona’s products and is non-transferrable to
any subsequent purchaser(s) or owner(s) of these products.
Coverage Periods
Atlona’s Limited Product Warranty Period begins on the date of purchase by the end-purchaser. The date contained on
the end-purchaser ‘s sales or delivery receipt is the proof purchase date.
Limited Product Warranty Terms – New Products
• 10 years from proof of purchase date for hardware/electronics products purchased on or after June 1, 2013
• 3 years from proof of purchase date for hardware/electronics products purchased before June 1, 2013
• Lifetime Limited Product Warranty for all cable products
• 3 years from proof of purchase date for all Refurbished (B-Stock) hardware and electronic products purchased on or
after June 1, 2013
Remedy
Atlona recommends that end-purchasers contact their authorized Atlona dealer or reseller from whom they purchased
their products. Atlona can also be contacted directly. Visit www.atlona.com for Atlona’s contact information and hours
of operation. Atlona requires that a dated sales or delivery receipt from an authorized dealer, reseller or end-purchaser is
provided before Atlona extends its warranty services. Additionally, a return merchandise authorization (RMA) and/or case
number, is required to be obtained from Atlona in advance of returns.
Atlona requires that products returned are properly packed, preferably in the original carton, for shipping. Cartons not
bearing a return authorization or case number will be refused. Atlona, at its sole discretion, reserves the right to reject
any products received without advanced authorization. Authorizations can be requested by calling 1-877-536-3976 (US
toll free) or 1-408- 962-0515 (US/international) or via Atlona’s website at www.atlona.com.
Exclusions
This Limited Product Warranty excludes:
• Damage, deterioration or malfunction caused by any alteration, modification, improper use, neglect, improper
packing or shipping (such claims must be presented to the carrier), lightning, power surges, or other acts of nature.
• Damage, deterioration or malfunction resulting from the installation or removal of this product from any installation,
any unauthorized tampering with this product, any repairs attempted by anyone unauthorized by Atlona to make
such repairs, or any other cause which does not relate directly to a defect in materials and/or workmanship of this
product.
• Equipment enclosures, cables, power supplies, batteries, LCD displays, and any accessories used in conjunction with
the product(s).
• Products purchased from unauthorized distributors, dealers, resellers, auction websites and similar unauthorized
channels of distribution.
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Disclaimers
15
This Limited Product Warranty does not imply that the electronic components contained within Atlona’s products will
not become obsolete nor does it imply Atlona products or their electronic components will remain compatible with any
other current product, technology or any future products or technologies in which Atlona’s products may be used in
conjunction with. Atlona, at its sole discretion, reserves the right not to extend its warranty offering in instances arising
outside its normal course of business including, but not limited to, damage inflicted to its products from acts of god.
Limitation on Liability
The maximum liability of Atlona under this limited product warranty shall not exceed the original Atlona MSRP for
its products. To the maximum extent permitted by law, Atlona is not responsible for the direct, special, incidental or
consequential damages resulting from any breach of warranty or condition, or under any other legal theory. Some
countries, districts or states do not allow the exclusion or limitation of relief, special, incidental, consequential or indirect
damages, or the limitation of liability to specified amounts, so the above limitations or exclusions may not apply to you.
Exclusive Remedy
To the maximum extent permitted by law, this limited product warranty and the remedies set forth above are exclusive
and in lieu of all other warranties, remedies and conditions, whether oral or written, express or implied. To the maximum
extent permitted by law, Atlona specifically disclaims all implied warranties, including, without limitation, warranties of
merchantability and fitness for a particular purpose. If Atlona cannot lawfully disclaim or exclude implied warranties
under applicable law, then all implied warranties covering its products including warranties of merchantability and fitness
for a particular purpose, shall provide to its products under applicable law. If any product to which this limited warranty
applies is a “Consumer Product” under the Magnuson-Moss Warranty Act (15 U.S.C.A. §2301, ET SEQ.) or other
applicable law, the foregoing disclaimer of implied warranties shall not apply, and all implied warranties on its products,
including warranties of merchantability and fitness for the particular purpose, shall apply as provided under applicable
law.
Other Conditions
Atlona’s Limited Product Warranty offering gives legal rights, and other rights may apply and vary from country to
country or state to state. This limited warranty is void if (i) the label bearing the serial number of products have been
removed or defaced, (ii) products are not purchased from an authorized Atlona dealer or reseller. A comprehensive list of
Atlona’s authorized distributors, dealers and resellers can be found at www.atlona.com .
Atlona, Inc Product Registration
Thank you for purchasing this Atlona product. - We hope you enjoy it and will take an extra few
moments to register your new purchase.
Registration creates an ownership record if your product is lost or stolen and helps ensure you’ll
receive notification of performance issues and firmware updates.
At Atlona we respect and protect your privacy, assuring you that your registration information is
completely secure. Atlona product registration is completely voluntary and failure to register will not
diminish your limited warranty rights.
To register go to: http://www.atlona.com/registration
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.