Atlona Technologies’ AT-HD-V88M is an 8x8 HDMI Matrix Switcher designed to work as a switcher for multiple Audio/Video sources and displays. This Atlona matrix unit is capable of switching HDMI signals between
eight sources and eight displays. Because it is a matrix switch, any or all of the 8 inputs can simultaneously be
switched to any or all of the outputs. Along with supporting HDMI 1.3, HDCP 1.1 and DVI 1.0, this devise will
support high denition video in multiple resolutions of up to 1080p or 1920x1200. The input EDID of this unit
is independent, allowing each input to switch between the TV EDID or pre-recorded EDID information. With
manual, RS232, as well as IR Remote control options, Atlona’s AT-HD-V88M Matrix Switcher is perfect for all
applications involving HDMI devices, PC monitors, Plasma TV displays and HDTVs.
APPLICATIONS
• Commercial and Residential Integration
• Event entertainment integration
• Multi-task project presentation
• Showroom display
• Advertisement display control
PACKAGE CONTENTS:
• AT-HD-V88M Unit
• Remote Control
• 24V DC power adaptor
• Power cord
• Operation Manual
SYSTEM REQUIREMENTS:
HDMI input device(s) and HDMI output device(s) with HDMI cables.
www.atlona.com | toll free: 1-877-536-3976
For International: 1-408-962-0515
3
Page 4
FEATURES:
• HDMI 1.3, HDCP 1.1 and DVI 1.0 compliant
• Supports digital video formats in Deep Color 10 bits and new lossless compressed (Dolby TrueHD,
Dolby Digital Plus and DTS HD Master Audio) digital audio
• The HDMI inputs clock and phase adjustments are designed for video signal quality to be the same as
prior connecting to the matrix.
• Switcher has a preset memory function, which allows user to create multiple presets and recall them
when required.
• System Lock function, allows to lock the controls on the front panel
• Compatible with all HDMI sources and displays
• Switcher supports a wide range of PC and HDTV resolutions from 640x480 to 1920x1200 and 480i to
1080p
• Switcher could be controlled though RS232, IR or manual controls on the front panel
• IR input allows users to extend IR signal further away from the switch
• Supports LPCM 7.1 channels output from each independent HDMI ports
• HDMI cable distance test with 1080p at full bitrates, the Input/ Output can run up to 35ft input/50ft
output or 50ft input/35ft output
• Independent switchable EDID function for choosing the native resolution of the display
• High Quality Silicon Image Chip-sets are used on all the inputs/outputs of the switcher
• IR frequency is 20 to 60kHz
• Rack Mountable design for easy installation (4U)
• Useful hot keys for quick set up
• Firm housing structure with intensify placement allowing heat dispensing
SPECIFICATIONS:
Inputs8 x HDMI
Outputs8 x HDMI
IR Frequency20~60KHz
Power Supply24VDC/6.25A (Universal)
ESD ProtectionHuman body model: ± 10kV (air-gap discharge)
± 6kV (contact discharge)
Dimensions (mm)482(W) x385(D) x 176(H)
Weight(LB)19.8
Chassis MaterialAluminum
Silkscreen ColorMetal Black
Power Consumption100W
Operating Temperature0˚C ~ 40˚C / 32˚F ~ 104˚F
Storage Temperature-20˚C ~ 60˚C / -4˚F ~ 140˚F
Relative Humidity20~90% RH (no condensation)
www.atlona.com | toll free: 1-877-536-3976
For International: 1-408-962-0515
4
Page 5
OPERATION CONTROLS
The following sections describe the hardware components of the unit.
7.1. Front Panel
AT-HD-V88M
ALL MEMORY RECALL
POWER EDIDLOCK
ENTER
ABCD
1234
HGFE
8765
HDMI MATRIX 8:8
①②③⑩④ ⑤ ⑥
⑦ ⑧ ⑨
1. Display: displays setting information with each output and input selection.
2. IR sensor.
3. POWER: Press this button to turn the switcher ON. When switcher is ON the LED will illuminate
GREEN. Press it again to enter into STANDBY mode, the LED will illuminate in RED.
4. EDID: Press this button to select the EDID function from the Display.
available shown on the display: 1. Standard Mode and 2. TV Mode. Press the number key to select
the desired input rst, then press 1 or 2 to select the EDID mode.
The LED will illuminate while setting the EDID. After the selection is made, press the enter key to
conrm the selection. Standard mode means the device will use the internal built-in EDID. TV mode
means the device will use TV or Audio Receiver EDID. Factory default setting is on TV mode.
Notes:
5. LOCK: Press this button to lock all functions on the front panel and press it again to release the lock
function. When the LED illuminate in GREED, lock function is activate. If the LED is not illuminate, the key lock
is released.
6. ENTER: Press this button after each and every selection to conrm the selection. If this button is not
pressed after 20 second of the selection, the selection will be void.
www.atlona.com | toll free: 1-877-536-3976
For International: 1-408-962-0515
5
Page 6
7. ALL: Press this button to set all the outputs to display the same input. After, pressing the “All” button, press
an input number and press enter to conrm the selection.
8. MEMORY: Press this button to set your desired preset (total of 6 presets). Press the desired setting number rst. When all the inputs/outputs are being set, press MEMORY to record into the system.
*there are 6 settings can record into the system.
Factory default setting is 1.12345678, 2.87654321,
3.11223344, 4.55667788, 5.11221122, 6.33443344.
9. RECALL: Press this button to recall the previous preset from the memory total of 6 presets, and select from
1~6 for the desire setting. Press the enter button to conrm the selection.
10. OUT A to H & IN 1 to 8: Press the output source selection to correspond to the inputs. First press your
output selection from A to H and wait for 2 sec. Then press the input selection again from 1 to 8 then press the
enter button to conrm your setting. Each output selection only allows a single input setting each time.
7.1.1. Troubleshooting:
1. No Video Signal – please try learning EDID see. Page 4 sec. 4
2. No Video on one of the TV’s: Most likely one of the TV’s has a lower resolution capability than others. The
switcher has no ability to scale one output to a lower resolution, therefore the lower resolution settings would
have to be forced on the source. Please switch your DVD Player or another source to the lowest displays optimal resolution. If you don’t want to sacrice the quality on all the TV’
convert the signal from (example: 1080p 720P)
s, Atlona offers HDMI Down Converter to
3. Audio Receiver only shows Stereo or PCM – Most of TV’s are only able to handle Stereo or PCM though
HDMI, therefore if you had learned EDID of the TV, than that EDID mode is being used to send signal to AV
Receiver. You can learn EDID of the receiver (see page 4 sec. 4); however if TV is not able to understand Digital Audio it might “Mute” or output distorted audio.
4. No Signal on any of the TV’s: Make sure the Input/Output cables are working by connecting them to the
sources and displays directly, bypassing the switcher
5. Not All of my sources are HDMI: The solution to it is to contact Atlona for a conversion box to convert any
signal you might have to HDMI. Atlona offers a wide variety of conversion boxes specically designed for application such as this.
www.atlona.com | toll free: 1-877-536-3976
For International: 1-408-962-0515
6
Page 7
7.2. Rear Panel
HDMI OUTPUTHDMI INPUT
HGFE8765
DCBA
USB-SERVICERS-232SERVICEIR IN
4321
DC 24V
AT-HD-V88M
①⑥⑤②③④⑦
1. HDMI OUTPUT A - H: Used to connect to desired HDMI displays.
2. SERVICE: Used for rmware upgrading.
3. RS-232: Used for controlling the switch though serial commands.
4. USB SERVICE: Used for rmware upgrade
5. IR IN: Use to extend your IR receiver with IR extender cable that accepts only 38KHz.
6. HDMI INPUT 1to 8: Use to connect the HDMI or DVI sources
7. DC 24V: Plug the 24V DC power supply into the unit and connect the adaptor to AC wall outlet.
REMOTE CONTROL
This remote control can be set with multiple formats according to the dipswitch setting.
12
45
7
3
6
9
8
0
There are total of four dipswitches with two types of settings.
When the dip switches are all set to ON/↑ the remote control is able to control all outputs
and all inputs.
(For example, when output A wants to select input 5, Press 1 rst, wait for a second then
press 5. The output display A will display input source 5.
Other settings referring to the below section are output based to control the input selections.
(For example, when all the dip switches are set to OFF/↓ this setting is based on output A
Which means it can only control the input selections. When output A wants to select input 3,
pressing 3 only switches output display A to display input source 3’s contents. )
1. Screw Assembly screw with LShape holder to rack frame
3. Side the unit on top of the L-Shape holder
2. The Assembly screw on the same position, one on the Right
side and the other on the Left side of rack frame
4. Screw Assembly screw in front of the rack
www.atlona.com | toll free: 1-877-536-3976
For International: 1-408-962-0515
12
Page 13
SAFETY INFORMATION
Safeguards
To reduce the risk of electric shock, do not
expose this product to rain or moisture.
If the wall plug does not t into your local
power socket, hire an electrician to replace
your obsolete socket.
Do not modify the wall plug.
Doing so will void the warranty and safety
features.
This equipment should be installed near
the socket outlet and the device should
be easily accessible in case it requires
disconnection.
Precautions
FCC Regulations state that any
unauthorized changes or modications to
this equipment not expressly approved by
the manufacturer could void the
user’s authority to operate this
equipment.
Avoid excessive humidity, sudden
temperature changes or temperature
extremes.
Keep this product away from wet locations
such as bathtubs, sinks, laundries, wet
basements and swimming pools.
Use only accessories recommended by
ATLONA to avoid re, shock or other
hazards.
Unplug the product before cleaning. Use
a damp cloth for cleaning. Do not use
cleaning uid or aerosols, which could
enter the unit and cause damage, re or
electrical shock. Some substances may
also mar the nish of the product.
Never open or remove unit panels or make
any adjustments not described in this
manual. Attempting to do so could expose
you to dangerous electrical shock or other
hazards. It may also cause damage to your
AT-HD-V88M. Opening the product will void
the warranty.
Operate this product using only the
included external power supply. Use of
other power supplies could impair
performance, damage the product or cause
res.
In the event of an electrostatic discharge,
this device may automatically turn off. If this
occurs, unplug the device, and plug it back
in.
Protect and route power cords so they will
not be stepped on or pinched by anything
placed on or against them. Be especially
careful of plug-ins, or cord exit points from
this product.
www.atlona.com | toll free: 1-877-536-3976
For International: 1-408-962-0515
Do not attempt to service the unit. Instead
disconnect it and contact your Authorized
ATLONA reseller or contact ATLONA
directly.
13
Page 14
1. LIMITED WARRANTY
Atlona Technologies warrants that (a) its products (the “Product”) will perform substantially in accordance with the ac-
companying written materials for a period of 3 YEARS from the date of receipt and (b) that the Product will be free from
defects in materials and workmanship under normal use and service for a period of 3 years. In the event applicable law
imposes any implied warranties, the implied warranty period is limited to 3 years from the date of receipt. Some jurisdic-
tions do not allow such limitations on duration of an implied warranty, so the above limitation may not apply to Customer.
2. CUSTOMER REMEDIES
Atlona Technologies and its suppliers’ entire liability and Customer’s exclusive remedy shall be, at Atlona Technologies’
option, either return of the price paid for the Product, or repair or replacement of the Product that does not meet this
Limited Warranty and which is returned to Atlona Technologies with a copy of Customer’s receipt. This Limited Warranty
is void if failure of the Product has resulted from accident, abuse, or misapplication. Any replacement Product will be war-
ranted for the remainder of the original warranty period or 3 year, whichever is longer.
3. NO OTHER WARRANTIES
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ATLONA TECHNOLOGIES AND ITS SUPPLIERS
DISCLAIM ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO IM-
PLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH REGARD TO
THE PRODUCT AND ANY RELATED WRITTEN MATERIALS. THIS LIMITED WARRANTY GIVES CUSTOMER SPE-
CIFIC LEGAL RIGHTS. CUSTOMER MAY HAVE OTHER RIGHTS DEPENDING ON THE JURISDICTION.
4. NO LIABILITY FOR DAMAGES
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL ATLONA TECHNOLOGIES OR
ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING WITHOUT LIMITATION, SPECIAL, IN-
CIDENTAL, CONSEQUENTIAL, OR INDIRECT DAMAGES FOR PERSONAL INJURY, LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING
OUT OF THE USE OF OR INABILITY TO USE THIS PRODUCT, EVEN IF ATLONA TECHNOLOGIES HAS BEEN AD-
VISED OF THE POSSIBILITY OF SUCH DAMAGES. IN ANY CASE, ATLONA TECHNOLOGIES’ AND ITS SUPPLIERS’
ENTIRE LIABILITY UNDER ANY PROVISION OF THIS AGREEMENT SHALL BE LIMITED TO THE AMOUNT ACTU-
ALLY PAID BY YOU FOR THE PRODUCT. BECAUSE SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT
APPLY TO YOU.
www.atlona.com | toll free: 1-877-536-3976
For International: 1-408-962-0515
14
Page 15
ATLONA PRODUCT REGISTRATION
Thank you for purchasing this Atlona product — we hope you’ll enjoy it.
We also hope that you’ll take a few moments to register your new purchase. Registration creates an ownership
record if your product is lost or stolen and helps ensure you’ll receive notication of performance issues and rmware
updates.
At Atlona, we respect and protect your privacy and assure you that your registration information is completely
secure. Of course, Atlona product registration is totally voluntary and failure to register will not diminish your limited war-
ranty rights.
To register go to www.atlona.com/registration
www.atlona.com | toll free: 1-877-536-3976
For International: 1-408-962-0515
15
Page 16
www.atlona.com | toll free: 1-877-536-3976
For International: 1-408-962-0515
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.