Atlona AT-HDF30SR User Manual

AtlonA
Miniature Multimode Fiber Optic HDMI
Extension Kit
AT-HDF30SR
User Manual
TABLE OF CONTENTS
1. Introduction .................................................. 1
2. Features .................................................. 1
3. Specication .................................................. 2
4. Package Contents .................................................. 2
5. Operation .................................................. 3
6. Audio .................................................. 3
7. Serial Data .................................................. 3
8. RS-422 Serial Data .................................................. 3
9. Connection Diagram .................................................. 4
10. Safety Information .................................................. 5
11. Warranty .................................................. 6
12. Atlona Product Registration .................................................. 7
INTRODUCTION
Atlona Technologies’ new AT-HDF30S (Transmitter) and AT-HDF30R ( Receiver ) units are low cost, Fi­ber Optic HDMI baluns. This extremely small and high performance solution will carry HDMI audio/video
signal, bi-directional stereo audio and 2 channels of RS-232 through one multimode ber. This Mini-HDMI ber optic transmitter allows any HD video source to extend signal up to 400m at WUXGA (1920x1200 @
60Hz) and supports HDTV resolution up 1080p. Multiple signals can run through a single conduit without crosstalk or interference . Along with being HDCP compliant, this unit is capable of transmitting DVI video signal with an Atlona DVI-to-HDMI adapter.
Atlona’s AT-HDF30SR is equipped with advanced digital ber optic technology allowing for self adjust­ment with no com¬pression, bit reduction, or signal degradation. These units support 12-bit color depth
and have an 8dB input equalizer, which compensates losses over 5m (16ft). With this self-adjustment and
no power cord needed, quick and easy set up is as simple as plug and play.
The AT-HDF30S is compatible with other Atlona products including the AT-DVIF30R and AT-RGBF30R (for non HDCP signal only ). Using one of these units on the receiver end will not only transmit signal, but also convert from HDMI-to-RGB/YPbPr/DVI in a single setup. This extension kit is the perfect solution for
Video Wall Presentations and all Digital Signage applications due to its long range, conversion ability, and lossless signal transmission.
FEATURES:
• HDMI v1.3 Compliant
• Supported signals:
Digital Audio Video
Bi-Directional Stereo Audio
Channel RS232
• Supported resolutions at 400M ( 1320FT )
PC : 1920x1200 (60Hz)
HDTV: 1080p/1080i/720p
• Supports HDCP/DDC Content
• No loses, no degradations, no crosstalk
• One Multimode ( SC type ) Fiber
• 12-bit color depth and 8dB equalizer
• MAC/PC compatible
• High secure signal transfer
• Compatible with AT-DVIF30R and AT-RGBF30R
Loading...
+ 6 hidden pages