Atlona AT-DVI-41A User Manual

4x1DVI Switcher with
Stereo Audio
AT-DVI-41A
Toll free: 1-877-536-3976
Local: 1-408-962-0515
User Manual
www.atlona.com
TABLE OF CONTENTS
11. Atlona Product Registration 10
Toll free: 1-877-536-3976
Local: 1-408-962-0515
1
www.atlona.com
INTRODUCTION
The Atlona AT-DVI-41A is 4 inputs and 1 output DVI Switcher with Stereo Audio. The switcher is designed to route up to 4 x DVI sources with Audio to a single display. The DVI-41A is capable of passing extremely high resolutions up to 1920x1200 or 1080p. Each input is featured with a built-in repeater which will help to keep the signal quality the same as it was originally.
The DVI switcher is fully HDCP compliant, therefore could be used along with HDMI sources, DVI/HDMI adapters or cables will be required.
The Atlona 4x1 DVI Switcher could be controlled though IR remote, RS232 port or manually via buttons selection on the front panel of the switch.
Note: For applications where customer would need the computer to sense a monitor at all the time even when switcher is switched to a different computer, we recommend to use our EDID Recorder, AT-DVISync. User would require 1 x DVISync per computer.
FEATURES
• The Atlona AT-DVI-41A is designed to switch up to 4 x computers to 1 x monitor.
• Switcher is featured with 4 x Stereo audio inputs and 1 x Output
• Switcher is able to support high resolutions up to 1920x1200 (WUXGA) or 1080p (1920x1080)
• AT-DVI-41A is fully HDCP compliant and therefore can also work with HDMI sources (DVI/HDMI adapters will be required)
• High Bandwidth Support up to 6.75Gbps allows high motion video and high resolutions to be passed though
without any delay or degradation
• Support wide range of Computer resolutions from VGA to WUXGA (640x480 ~ 1920x1200)
• HDTV resolutions: 480i/480p, 576i/576p, 720p, 1080i & 1080p (50/60Hz)
• Switcher is compatible with all DVI enabled computers and monitors (DVI output has to be digital only)
• Support Digital Video TMDS formats in Deep Color up to 36bits
• IR input jack, allows users to extend IR signal up to 1000ft from the switch
• Various control Options: IR, RS232 and Manual Push Button on the front panel
• Rack Mountable, comes with a set of rack ears – 1U
PACKAGE CONTENT
• 1 x AT-DVI-41A (4x1 DVI Switch with Stereo Audio)
• 1 x Manual
• 1 x IR Remote Control
• 19 inch Rack Ears - 1U
• IR Extender allows user to connect an IR extension cable to the switcher and control the switch from up to 1000ft
away.
• RS232 Cable
• Power Supply 12VDC, Universal Type 50/60Hz, 100~230 VAC
Toll free: 1-877-536-3976
Local: 1-408-962-0515
2
www.atlona.com
SPECIFICATIONS
Type of a Switcher 4 input to 1 output DVI with Stereo Audio Switch DVI Input DVI-I (Digital Only) Stereo Audio Input 1/8-inch (3.5mm) Resolution support up to 1920x1200 or 1080p HDCP Compliant EDID Compliant Input Signals Video (TMDS) 0.5~1.0Vpp, DDC 5Vpp Various video input
interface supporting digital video stand­ards
Various control Options IR, RS232 and Manual Push Button on the front panel
Data Rates 250Mbps to 6.75Gbps Infrared frequency 38 KHz Safety Approvals CE, FCC, RoHs (2002/95/EC)
Dimensions (LWH) 19”x 7.87” x 1.75”(482mm x 200mm x 44mm) – 1U
Power Supply DC12V / 1.25A (110~240V) Shipping Weight 5.80 lb
RGB/YCBCR 24/30/36-bits YCBCR 8/10/12/16/20/24-bits
Double data rate interface for RGB/YCBCR
12/15/18-bits
PANEL DESCRIPTIONS
1. Front Panel
1 62 3 4 5
1. POWER ON SWITCH. The power switch turns the unit ON and OFF. The LED will illuminate red to indicate that the switcher is ON.
2. INPUT SOURCES STATUS LED’s. Input sources 1 though 4 LED will illuminate blue to indicate that a Digital source is
present on that input.
3. SOURCES SELECT BUTTONS. 4 x buttons for selecting desired DVI input
4. IR SENSOR. The IR sensor receives IR commands from the IR remote control.
5. OUTPUT STATUS WITH LED DISPLAY. Output Status via LED to reveal 1~4 input sources.
6. 19 INCH EAR MOUNT PAIR. 19 –inch Rack Ears - 1U
Toll free: 1-877-536-3976
Local: 1-408-962-0515
3
www.atlona.com
Loading...
+ 7 hidden pages