Atlona ATDVI250SR User Manual

AtlonA

DVI over CAT5 Transmitter/Receiver

With RS-232 & Stereo Audio.
AT-DVI100SR & AT-DVI250SR

User Manual

AT-DVI100SR

AT-DVI250SR

TABLE OF CONTENTS

1. Introduction .................................................. 1

2. Contents .................................................. 1

3. Features .................................................. 1

4. Operation Controls .................................................. 2

4.1 Transmitter’s Front Panel ....................................... 2

4.2 Receiver’s Front Panel ....................................... 3

4.3 Receiver’s Rear Panel ....................................... 4

5. RS-232 Protocol .................................................. 4

6. Connection and Installation ....................................... 5

7. Specications .................................................. 5

8. Safety Information .................................................. 6

9. Warranty .................................................. 7

10. Product registration .................................................. 8

Introduction

Atlona Technologies’ DVI over CAT5/6/7 Transmitter/Receivers with RS-232 & Stereo Audio

(AT-DVI100SR & AT-DVI250SR) provide the most exible solution in the Audio Video indus­try today at which high denition video and high quality audio can be transmitted to differ­ferent locations over long distances with low cost Cat5/6/7 cables. These DVI transmitter
and receiver units over CAT5/6/7 are a pair of extenders for sending DVI signal along with
stereo audio and RS232 up to 825ft. Along with built in EDID and RS232 control, these ex-

tender are simple to operate and easy to install. The AT-DVI100SR & AT-DVI250SR are the

perfect products for extending high resolution digital signal with crystal clear images from

source to display.

Contents

• DVI over CAT 5 /6/7 Transmitter x 1

• DVI over CAT 5 /6/7 Receiver:

330ft (AT-DVI100SR) x1 or 825ft (AT-DVI250SR) x 1

• Operational Manual x 1

• 5V/2.6A Power Adaptor x 2

Features

• Transmits DVI long distances over cost effective twisted Pair CAT5/6/7 cable

up to 330ft : (AT-DVI100SR)

up to 825ft : (AT-DVI250SR)

• Stereo Audio

• RS232 Control Signal

• DVI 1.0 Compliant; HDTV Compatible

• Supports Equalizer, Gain, CTI (Color Transient Improvement) adjustment. (Only available

on 250SR model.)

• Supports high denition input up to 1080P/1920x1200

• Simple installation and easy to operate.

• HDCP Compliant.

• Build-in EDID module which would save EDID info of the display to reliable connection
between the source and display.

The length depends on the characteristics and quality of the cables. Higher resolutions and longer transmis­sion distances require low skew cables (<25ns/100m) for best performance. Unshielded CAT6 with metal