Atlona AT-DVI15SRS User Manual
DVI over single CAT5e or CAT6
powerless Mini-Extender
AT-DVI15SRS
atlona.com
User Manual
Toll free: 1-877-536-3976
Local: 1-408-962-0515
TABLE OF CONTENTS
1
1. Introduction 2
2. Features 2
3. Package Contents 2
4. Specifications 2
5. Connection and Operation 3
6. Notice 3
7. Safety Information 4
8. Warranty 5
9. Atlona Product Registration 6
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
INTRODUCTION
2
Atlona AT-DVI15SRS extends your PC DVI transmission distance up to 30m/100ft . With AT-DVI15SRS, users
can transmit high quality digital video of PC applications through one cost effective CAT-5/5e to the remote
monitor or projector, instead of using short and expensive DVI cables. With embedded EDID inside the extender, your PC will continue to send the digital video even when the monitor is not connected. The user can then
disconnects the monitor, place it in a remote location and reconnect it without rebooting the operating system.
Atlona AT-DVI15SRS includes two identical units: transmitting and receiving units. The transmitting unit is connected to your PC DVI output and the receiving unit is connected to the monitor. While successfully connected,
the two LED lights on RJ-45 connector will blink. The transmission distance between the sending and receiving
units can be up to 30m/100ft at XGA (1024x768 @60Hz) or 15m/50ft at WUXGA (1920x1200@60Hz). With
compact size and requiring no power, AT-DVI15SRS is the most cost effective choice for bringing your impressive digital video to the remote display.
FEATURES
• DVI 1.1 compliant
• Handy DVI-D to RJ-45 Adaptor with programmable EDID feature
• Extend the transmission distance from the sources up to 30m/100ft at XGA (1024x768 @60Hz) or15m/50ft
at WUXGA (1920x1200 @60Hz)
• Identical units work at both transmitting and receiving end. Easy to install.
• LED indicators
• Compact size
PACKAGE CONTENT
• 2x AT-DVI15SRS (for both TX: transmitting unit and RX: receiving unit)
• 1x User manual
SPECIFICATIONS
Video Bandwidth 1.65 Gbps (DVI 1.1)
Input TMDS signal 1.2 volts (peak-to-peak)
Input DDC signal 5 volts (peak-to-peak)
DVI-D Connector digital only
RJ-45 Connector 2 indication LEDs
Dimensions 50mm x 40mm x 20mm / 2”x1.6”x0.8” (L x W x H)
Weight 44g / 1.6oz
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Loading...