Page 1
Owner’s Manual
Wall Plate Level Control
WPD-VC10K
Wall Plate Level Control 10kΩ
WPD-VC10K
10kΩ
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
AtlasSound.com – 1 –
Specifications are subject to change without notice.
Page 2
WPD-VC10K
Wall Plate Level Control 10kΩ
Features/Specifications
• Works With VCA 2 or 3-Conductor Systems
• 10kΩ
• White Decor Style Plate, ABS Material
• Fits a Single Gang Electrical Box
• Designed for Remote Level Control of Atlas Sound Products
• 2 or 3-Conductor Interface Connection
• Label Guard (Allows for Clean Custom Function Identification)
• Removable 3 Position Phoenix Style Connector, 5.08mm Pin Spacing
• Height - 4.5" (114mm)
• Width - 2.5" (63mm)
• Depth - 0.24" (6.4mm)
• Maximum Tested Distance 200 ft, 22-Gauge Wire
Electrical Hook-Up
Two Conductor Configuration
P1P3NC
WPD-VC10K
P2
P1
RMT
P2
Level
P3
Owner’s Manual
To VCA Terminals
Three Conductor Configuration
DC 10V
Note: Pins 1 & 3 may need to be reversed
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
AtlasSound.com – 2 –
Specifications are subject to change without notice.
P1
P3
Control
P2
depending on VCA orientation.
Page 3
Owner’s Manual
Description
1
2
WPD-VC10K
Wall Plate Level Control 10kΩ
1. Level Control Knob - Rotate clockwise to increase the level.
2. Label Guard - Remove plastic cover to insert custom label.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
AtlasSound.com – 3 –
Specifications are subject to change without notice.
Page 4
WPD-VC10K
Wall Plate Level Control 10kΩ
Owner’s Manual
Limited Warranty
All products manufactured by Atlas Sound are warranted to the original dealer/installer, industrial or
commercial purchaser to be free from defects in material and workmanship and to be in compliance
with our published specifications, if any. This warranty shall extend from the date of purchase for
a period of three years on all Atlas Sound products, including SOUNDOLIER brand, and ATLAS
SOUND brand products except as follows: one year on electronics and control systems; one year on
replacement parts; and one year on Musician Series stands and related accessories. Additionally,
fuses and lamps carry no warranty. Atlas Sound will solely at its discretion, replace at no charge or
repair free of charge defective parts or products when the product has been applied and used in
accordance with our published operation and installation instructions. We will not be responsible
for defects caused by improper storage, misuse (including failure to provide reasonable and
necessary maintenance), accident, abnormal atmospheres, water immersion, lightning discharge,
or malfunctions when products have been modified or operated in excess of rated power, altered,
serviced or installed in other than a workman like manner. The original sales invoice should be
retained as evidence of purchase under the terms of this warranty. All warranty returns must comply
with our returns policy set forth below. When products returned to Atlas Sound do not qualify for
repair or replacement under our warranty, repairs may be performed at prevailing costs for material
and labor unless there is included with the returned product(s) a written request for an estimate
of repair costs before any nonwarranty work is performed. In the event of replacement or upon
completion of repairs, return shipment will be made with the transportation charges collect.
EXCEPT TO THE EXTENT THAT APPLICABLE LAW PREVENTS THE LIMITATION OF CONSEQUENTIAL
DAMAGES FOR PERSONAL INJURY, ATLAS SOUND SHALL NOT BE LIABLE IN TORT OR CONTRACT
FOR ANY DIRECT, CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGE ARISING OUT OF THE
INSTALLATION, USE OR INABILITY TO USE THE PRODUCTS. THE ABOVE WARRANTY IS IN LIEU OF
ALL OTHER WARRANTIES INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE.
Atlas Sound does not assume, or does it authorize any other person to assume or extend on its
behalf, any other warranty, obligation, or liability. This warranty gives you specific legal rights and
you may have other rights which vary from state to state.
Service
Should your WPD-VC10K require service, please contact the Atlas Sound
warranty department at 1-877-689-8055, ext. 1274 to obtain an RA number.
Atlas Sound Tech Support can be reached at 1-800-876-3333.
Visit our website at www.AtlasSound.com to see other Atlas products
©2012 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound L.P.
All other trademarks are the property of their respective owners. ATS004434 RevB 10/12
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
AtlasSound.com – 4 –
Specifications are subject to change without notice.
Loading...