Page 1
Specifications subject to change without notice
©1997 Atlas/Sound Printed in U.S.A. 01001 SL10-1099
Ten
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
FEATURES
• Completely Assembled and All-Welded Construction
• 16-Ga. CRS Cabinet
• 5/8" - 5/8" - 1/2" EIA Standard Panel Mount Spacing
• 5/8" Offset Rails for Panel Mount
• 11-Ga. CRS Tapped Mounting. Rails
• 10-32 Pan-Head Screws for Panel Mount Supplied
• Spring-Loaded Hinge for Easy Removal of Rear Door, Except 400-5 and 400-7
• Keyed Cylinder Lock on Rear Door, Except 400-5 and 400-7
• Internal Louvers on Each Side, Except 400-5 and 400-7
• Wide Choice of Standard Paint Colors (No Additional Cost)
• Rubber Feet Provided on Models 400-5 and 400-7
• Optional Front Surface Door Available on Models 400-12 through 400-31 has
Right or Left-Hand Hinging Capability
GENERAL DESCRIPTION
Atlas/Sound 400 Series cabinets are designed for “desk top” installations accommodating 19" (483mm) wide panel-mounted equipment. They are available in
seven popular panel space sizes (see chart on back).
These compact cabinets are constructed of welded 16-ga. CRS throughout. A
locking rear door mounted on a spring-loaded hinge for easy removal is standard
on all except 400-5 and 400-7. (These smaller models have a removable rear
panel secured with “U” clips and bolts.)
Models 400-12 through 400-31 include vents on each side for air circulation. They
are also available with optional front surface door Model Series 400-XXFD (ex:
400-12FD). [Order separately.] Door has right or left-hand hinging capability and
must be customer-installed following simple drilling template (included).
External wiring is easily strung into the cabinet through the wire entry space below
the rear door or panel. Panel mounting rails are recessed 5/8” to provide a flush
appearance.
Series 400 cabinets are shipped completely assembled. Equipment panels and
accessories are mounted with 10-32 x 3/4" (19mm) pan-head screws (supplied).
Rails are formed 11-ga. CRS with tapped mounting holes.
Standard finish is textured black epoxy unless otherwise specified; consult Paint
Chart (SL# 10-1239) for other standard colors available at no additional cost.
A wide variety of convenience and electronic accessories are available for Standard
Series cabinets.
Shown with locking front door
400 Series
WELDED DESK TOP CABINETS
381.1
Page 2
Specifications subject to change without notice
©1997 Atlas/Sound Printed in U.S.A. 01001 SL10-1099
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
The desk top cabinet shall be Atlas/Sound Model _____ . It shall be
constructed of 16-gauge CRS. Cabinets with panel space greater
than 12-3/8" shall have vents for improved air circulation. It shall
have a locking rear door on spring loaded hinge with a cylinder lock
or removable panel. The rear of the cabinet shall have suitable entry
space for introducing external wire into the cabinet. Optional front surface door Model _______ shall be used.
The cabinet shall be provided with 10-32 x 3/4" (19mm) pan-head
screws and 11-ga. CRS mounting rails which shall be tapped
10-32. The finish shall be textured black epoxy.
Shipping Optional
A Weight Surface Mount
Model B Rack Panel Pounds Front
No. Width Height Depth Unit Space (Kg.) Door
400-5 22-5/16" 8-1/2" 15-3/8" 3 5-3/8" 30 N.A.
(567mm) (216mm) (391mm) (137mm) (13.61kg)
400-7 22-5/16" 10-1/4" 15-3/8" 4 7-1/8" 33 N.A.
(567mm) (260mm) (391mm) (181mm) (14.97kg)
400-12 22-5/16" 15-1/2" 15-3/8" 7 12-3/8" 36 400-12FD
(567mm) (394mm) (391mm) (314mm) (16.33kg)
400-17 22-5/16" 20-3/4" 15-3/8" 10 17-5/8" 43 400-17FD
(567mm) (527mm) (391mm) (448mm) (19.50kg)
400-21 22-5/16" 24-1/4" 15-3/8" 12 21-1/8" 48 400-21FD
(567mm) (616mm) (391mm) (537mm) (21.77kg)
400-24 22-5/16" 27-3/4" 15-3/8" 14 24-5/8" 54 400-24FD
(567mm) (705mm) (391mm) (626mm) (24.49kg)
400-31 22-5/16" 34-3/4" 15-3/8" 18 31-5/8" 63 400-31FD
(567mm) (883mm) (391mm) (803mm) (28.58kg)
ARCHITECTS AND ENGINEERS’ SPECIFICATIONS
Loading...