Atlas Sound SB11WE Users Guide

SB11WE

Studio Boom Stand

6

SB11WE

A. Attach the three swivel casters onto the base using the lock

washers, flat washers, and bolts provided (see Figure #1).

B. Thread upright tube assembly (3) securely into the base (2). Use

care to thread the tube perpendicular to the base to avoid stripping

the threads.

C. Thread swivel assembly (4) onto the top of the upright tube assembly.

D. Place the straight boom tube (5), that contains the counterweight,

through the swivel assembly. Next, thread the straight boom tube

into the flared female end of the remaining boom tube (6).

E. Tighten all hardware and tubes securely.

F. Attach desired microphone / mic clip to threaded, angled end of the boom.

1/1

5

4

3

SB11WE

SB11WE
Caster
Assembly

2

Fig. #1

Flat Washer

Lock Washer

Bolt

©2012 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound L.P. All other trademarks are the property of their respective owners. All specs are subject to change without notice. ATS004378 RevA 5/12

1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: [phone]
FAX [phone]

AtlasSound.com