Page 1
With Grille
FAP40T Strategy Series® II
FAP40T
Without Grille
High Performance In A Very
Compact Footprint
The FAP40T is the newest member of Atlas Sound
Strategy Series® II family of ceiling speaker products.
Designed to provide high performance in a very compact
footprint, the FAP40T appeals to both system designers
and architects.
A unique (patent pending) tap selector switch design
allows for easy system tuning. A full selection of taps
up to 16 watts, as well as an 8 ohm bypass setting, is
included for maximum system versatility. This switch
also functions as a diffuser cone, providing smooth, even
dispersion of the high frequency content from the center
of the 4" driver. In fact, the high frequency response of
the FAP40T is so natural that many would assume that
the driver in the FAP40T was a coaxial design instead of
a cone driver.
Low frequency response is enhanced by the tuned
and ported enclosure design. The UL listed (UL1480)
enclosure is constructed of high impact injection molded
plastic and includes a press fit grille design that blends
quite well with contemporary architecture. A tile bridge
is included for suspended ceiling applications. The lightweight design of the FAP40T, coupled with the “dog leg”
mounting system allows the FAP40T to mount into most
drywall ceilings without the need for a separate mounting
ring. However, for new construction drywall ceiling
applications, the optional FA-TR4 trim ring is available.
• Tap selector switch located behind speaker magnet with
shaft through center of cone. Selector knob doubles as
dispersion cone and allows tap selection to be done
after speaker is installed in the ceiling
• Lightweight construction makes additional support in
drywall ceilings unnecessary
• Perfect companion with the FASUB70 subwoofer
system when sub bass is required
• Press-fit grille blends perfectly into contemporary architecture
• Tuned & ported design for extended bass response
• Low profile plastic enclosure
• 16 Watt internal transformer
• 8 ohm transformer bypass setting
• Barrier strip connection
• Tile bridge included
• UL 1480 listed
• Five Year Limited Warranty •
1601 Jack McKay Blvd.
Ennis, TX 75119
AtlasSound.com
Tech Support 800.876.3333
Printed in the USA
Specifications are subject to change without notice.
©2004 Atlas Sound LP. Atlas Sound is a trademark of Atlas Sound LP. All rights reserved.
484078
Barrier strip connection allows for easy system wiring as
well as “daisy chain” wiring to other FAP40T’s or even
FASUB70 subwoofers (a great combination!)
SPECIFICATIONS
MODEL FAP40T
POWER RATING 16 Watts @ 8 ohm
70.7V TAPS 1, 2, 4, 8, 16
FREQUENCY RESPONSE 85Hz - 15kHz
(±3dB)
SENSITIVITY 87dB Average
(1W/1M)
DISPERSION 105˚ 2kHz Octave Band (-6dB)
WOOFER 4" High Efficiency Polypropylene
W/SBR Surround
WOOFER MAGNET WEIGHT 10 oz (264g)
DIMENSIONS 7.375" (187mm) Bezel Diameter
7.125" (181mm) Overall Height
CUT-OUT DIMENSION 65⁄16" (160mm)
WEIGHT 3 lbs. (1.4kg)
000904
ATS001518 RevC 9/04
Page 2
FAP82T Strategy Series® II
C-Ring/V-Rail
Mounting System
FAP82T
With Grille
A Premium Performance, 70.7/100V
Tuned & Ported, 8" Coaxial Ceiling
Speaker System
Atlas Sound’s FAP82T is perfectly suited for business
music and public address applications ceilings heights
ranging from 12' - 25'. Higher ceilings require the
increased efficiency, tighter pattern control and extended
low frequency response provided by the FAP82T.
Installations into drop tile acoustic ceilings are made
easy with the C-Ring/V-Rail Mounting System. In “blind
mount” instances the V shaped rail system simplifies the
process of locating mounting hardware above the deck.
For existing construction drywall applications simply cut
the mounting hole and “corkscrew” the C-ring into the
hole allowing the “dog leg” mounting system to engage
the metal ring for additional support. For new construction
drywall ceilings the optional FAP82-TR trim ring may be
used.
With the FAP82T, Atlas Sound has addressed pendant
mounting for open plenum ceiling applications. A 1/4" -20
eyebolt assembly is included with the package allowing
suspension of the FAP82T with load rated cable or "all
thread". The enclosure is finished white to match the bezel
ring for better blend in open ceiling applications. Please
note that the enclosure/bezel ring may also be painted to
accommodate custom finishes when required.
• High efficiency 8" Strategy™ driver
• Extended low frequency response from the optimally
tuned and ported deep drawn galvanized steel enclosure.
(933 cubic inches)
• Front mounted tap selector switch for easy system tuning
adjustments (1.9W to 60W @ 70.7V plus 8 ohm setting)
• Unique “trap door” input section allows for through
conduit runs with rigid or flex conduit
• 4 Pole detachable “phoenix” style connector allows easy
pre-wiring and is convenient for daisy chaining additional
Strategy full range speakers or subwoofers
• “Press fit” grille to better blend into contemporary architecture.
• Ships complete with speaker/transformer factory
assembled into back can, grille and unique C-Ring/V-Rail
Mounting System hardware
• May be pendulum mounted via top mounted eyebolt
(included). Enclosure is also finished in white for optimum
aesthetics when hung in open ceiling applications
• UL1480 Listed
• Five Year Limited Warranty •
1601 Jack McKay Blvd.
Ennis, TX 75119
AtlasSound.com
Tech Support 800.876.3333
Printed in the USA
Specifications are subject to change without notice.
©2004 Atlas Sound LP. Atlas Sound is a trademark of Atlas Sound LP. All rights reserved.
484078
SPECIFICATIONS
MODEL FAP82T
POWER RATING 70 Watts @ 8 ohm
70.7V TAPS 1.9, 3.8, 7.5, 15, 30 & 60
FREQUENCY RESPONSE 75Hz - 12kHz
(±3dB)
FREQUENCY RESPONSE 60Hz - 20kHz
(±6dB)
SENSITIVITY 89dB Average
(1W/1M)
DISPERSION 100˚ 2kHz Octave Band (-6dB)
WOOFER 8" High Efficiency Polypropylene
W/SBR Cone Surround
CROSSOVER FREQUENCY 3400Hz
WOOFER MAGNET WEIGHT 21 oz (580g)
HF DRIVER Coaxially Mounted PEI Dome Tweeter
DIMENSIONS 15.75" (400mm) Bezel Diameter
12.625" (321mm) Overall Height
(Without Eyebolt Installed)
ENCLOSURE VOLUME 933 Cubic Inches
CUT-OUT DIMENSION 14" (356mm)
WEIGHT 14.5 lbs. (6.57kg)
000904
ATS001518 RevC 9/04
Loading...