Atlas Sound FA95-4, FA97-4 User Manual

Specifications subject to change without notice

© 2001 Atlas Sound LP Printed in U.S.A. 000501 SL1-1512

7

ONE

1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: [phone] / FAX [phone]

STRATEGY SERIES

™

4" MOUNTING SYSTEM ACCESSORIES

DIMENSIONS

CUTOUT REC. WEIGHT INT.

MODEL A B C DIA. SPEAKER** LBS / KGS VOLUME
FA97-4(NK)* 53⁄8"7

5

⁄8"7

9

⁄16"6

1

⁄2" FA134 2.0 / .9 .10ft

3

(137mm) (194mm) (192mm) (165mm) FA114

FA95-4(NK)* 53⁄

8"6

1

⁄

8"7

9

⁄

16"6

1

⁄

2" FA114 1.75 / .8 .08ft

3

(137mm) (156mm) (192mm) (165mm)

Strategy Series

Patented Mounting System

★FA97-4

★FA95-4

*(NK)= Models Without Knockouts
**FA134 and FA114 loudspeakers may be mounted in either FA97-4(NK) or FA95-4(NK) enclosures are also Plenum rated under
UL file 2043

Enclosures, Grilles,

Tile Bridge, Plaster

and T rim Rings

SYSTEM DESCRIPTION & APPLICATIONS

The patented Strategy Series (U.S. Patent #5206464) loudspeaker system was carefully engi­neered to provide excellent audio performance as well as optimum aesthetic and installation
advantages in new or existing construction. The innovative system, which uses matched audio
components, includes loudspeakers, acoustic enclosures, hardware-free grilles, trim rings, plas­ter rings and tile bridges.

Strategy Series components may be mixed and matched to provide an attractive, high-quality
and economical solution for meeting the music and voice-communication needs of owners,
architects, contractors and consultants. The wide dispersion of the 4" series loudspeakers
makes the system ideal for low-ceiling applications since fewer loudspeakers are required to
achieve proper coverage with desired sound levels. The series offers two performance levels:
standard and high-performance. Respective levels are determined by selected
loudspeaker/enclosure combination. (See below chart for recommended combinations.)

The 4" system is perfect for commercial, institutional and retail venues where high-fidelity music
and/or clear voice communication are required. Easier, faster installation and a superior overall
appearance are the three most distinguishable characteristics of the Strategy Series.

ACOUSTIC ENCLOSURES - FA97-4 SERIES AND FA95-4 SERIES

Strategy Series 4" loudspeaker enclosures are acoustically-treated, front-loading units,
equipped for installation in ceilings up to 11⁄4" thick. Models FA97-4 and FA95-4 feature depths
of 75⁄8

" and 6

1

⁄8

", respectively. The deeper, FA97-4 allows for extended low-frequency response

and is also lined with sound-deadening, 5⁄16

" thick acoustic batting (2 lb./cu.ft. density) and fea­tures an acoustic fiber board bottom to prevent “oil canning”. Both styles are equipped with
conduit knockouts and are available without knockouts (NK) to meet respective building code
requirements. Enclosures are constructed of CRS (22-ga. top ring & 20-ga. bottom/sides),
painted and include four threaded inserts for loudspeaker installation and three stud recepta­cles for accepting Strategy Series grilles. Both models are finished in black epoxy.

Model FA97-4 and FA95-4 install quickly and easily in plaster, drywall, or suspended tile ceil­ings up to 1

1

⁄4" thick utilizing three, easy-to-adjust rotating clamps that rotate and secure into
position with a screwdriver. The enclosures front-load Atlas Sound's 4" dia. Strategy Series
loudspeaker Models FA134 and FA114. (Refer to SL1-1533 and SL1-1524 for respective loud­speaker specifications and loudspeaker/transformer model numbers.) This direct loudspeaker­to-enclosure mounting method removes all load-bearing requirements from the grille, allowing
the use of welded studs for convenient, push-on grille installation — a time-saving feature
which presents a clean and hardware-free appearance. It also facilitates fast and easy grille re­moval for painting or other maintenance.

FA97-4 Enclosures allow the high-performance coaxial FA134 and full-range FA114 loudspeakers
to achieve maximum potential. This high-quality loudspeaker/enclosure combination is perfect
for applications where high-fidelity music and intelligible speech are imperative.

FA95-4 Models are economical system enclosures with less depth than FA97-4 models. They
are suited for installations requiring quality voice transmission, music and signal reproduction in
commercial, industrial and institutional applications.

★

R

TRIM RING - Model FA-TR4

The Strategy Series FA-TR4 trim ring/rough-in bracket, for wall or ceiling-mount applications,
installs prior to the drywall and serves as a pattern cut-out for the drywall contractor to finish­out the wall leaving the proper opening for a FA97-4 or FA95-4 enclosure and also a FAPR-4
Plaster Ring. This step identifies pre-wire location, expediting sound system installation. Trim
ring measures 25

5

⁄8"L and will accommodate 3⁄8" to 11⁄4" drywall. Mounting holes are provided to

match both 16" and 24" center studs. FA-TR4 is finished in black epoxy.

NET WEIGHT

MODEL A B C LBS / KGS
FA-TR4 25

5

⁄8”6

5

⁄8”11

1

⁄4” 1.5 lbs

(651mm) (166mm) (285mm) (.7 kgs)

Specifications subject to change without notice

© 2001 Atlas Sound LP Printed in U.S.A. 000501 SL1-1512

1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: [phone] / FAX [phone]

PLASTER RING - Model FAPR-4

Model FAPR-4 plaster ring is used to mount Strategy Series 4" loudspeakers into ceilings and
walls for applications where an enclosure cannot be used, or where it is not desired. Unit is
constructed with the same internal mounting flange as FA97-4 and FA95-4 enclosures. It may
be used to mount non-transformer equipped loudspeaker models into walls having a min. depth
of 2

7

⁄16". The FAPR-4 will facilitate installation of transformer-equipped loudspeaker models into

walls with a minimum depth of 4

3

⁄8" *. Plaster ring is constructed of 20-gauge CRS and finished
in textured black epoxy. It is equipped with four threaded inserts for loudspeaker installation
and three stud receptacles for mounting Strategy Series grilles. The mounting mechanism is
comprised of three rotating clamps (included).

*Measured from the front of the mounting surface to the rear of the inside mounting area.

CUTOUT NET WEIGHT

MODEL A B C DIA. LBS / KGS
FAPR-4 5

3

⁄8"7

9

⁄16"

7

⁄8"6

1

⁄2" .5 lbs

(137mm) (192mm) (22mm) (165mm) (227g)

MODEL A B C NET WEIGHT LBS/KGS
FA81-4 14

1

⁄8"23

5

⁄8"6

1

⁄2" 2.38 lbs

(359mm) (600mm) (163mm) 1.1kgs

MOUNTING ACCESSORIES

TILE BRIDGE - Model FA81-4

The Strategy Series™ tile bridge for 4" loudspeakers is designed to prevent ceiling tile sag by
distributing the loudspeaker assembly weight to the ceiling’s support members. Model FA81-4
accepts enclosure Model Series FA95-4 and FA97-4, Plaster Ring Model FAPR-4 and is
constructed of 24-gauge electro-galvanized steel.

FA81-4

FAPR-4

FA-TR4

• • • • • •

• •

• • • • • •

A

A

•

B

•

C

• • • • • •

• • • • • •

• •