Atlas Sound AS-140, AS-120 User Manual
Specifications subject to change without notice
© 2001 Atlas Sound LP Printed in U.S.A. 000501 SL10-1549
405
TEN
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
WALL MOUNT SHELVES
AS-120
AS-140
• Choose Welded or 3-Piece Shelf to Securely Wall
Mount Electronic Components
• Sturdy 16-Gauge CRS Units Mount to 16” Wall Studs
• Includes Wire Access Holes to Safely Accommodate Cabling
• Offered in a Choice of Standard Colors
APPLICATION
Atlas Sound Model AS-120 and AS-140 wall mount shelves are perfect for limited-access of electronic equipment in convenience food
stores, restaurants, audio/video control rooms, educational and institutional facilities, auditoriums, stadiums, or venues where the convenience of open access and wall mounting of equipment is desired.
The shelves wall mount on 16" centers.
Typical installations include supporting VHS recorders, amplifiers,
TV/video monitors, tuners, SCA receivers, computer CPU’s or other
electronic equipment that is not rack mountable, or does not require
enclosure protection.
MODEL AS-120 The durable, welded shelf is constructed of 16gauge CRS, and is equipped with four keyhole slots in the back panel
(2 on top and 2 on bottom). Keyhole slots are evenly spaced on 16"
centers for stud mounting to walls. Additionally, Model AS-120 features a
3
⁄8" (10mm) front return to safely retain equipment and a total
of four, 1
1
⁄2" diameter holes for wiring access (2 on bottom and 1 per
side panel). The shelf, which can support up to 100 pounds, has solid
side panels for added aesthetics and protection. Models are available
in a choice of standard colors.
MODEL AS-140 Versatile shelf may be mounted so that equipment
is installed between side supports or inverted ”bookshelf-style” for
open equipment placement. The durable, three piece shelf is constructed of 16-gauge CRS, and is equipped with four mounting holes,
evenly spaced on 16" centers for stud mounting to walls. For installation convenience, the bottom/top panel has a drilling template for
marking the four mounting holes. Model AS-140 shelf is formed on
four sides for rigidity, and has a total of four, 1
1
⁄2" diameter holes for
wiring access (2 on the bottom/top panel and 1 on each side panel).
The shelf, which can support up to 150 pounds, has welded hanger
gussets for extra strength. The AS-140 ships knocked-down for storage and shipping economies. It includes assembly hardware and is
available in a choice of standard colors.
MODEL DIMENSIONS WEIGHT CAPACITY MOUNTS WEIGHT
AS-120 20" W x 12
1
⁄2" D x 10" H (508 x 318 x 254mm) 100 lbs. Wall Surface 8.75 lbs. ( 3.95 kg.)
AS-140 20" W x 17" D x 123⁄8" H (508 x 432 x 314mm) 150 lbs. Wall Surface 14.5 lbs. ( 6.6 kg.)
AS-120
AS-140
Specifications subject to change without notice
© 2001 Atlas Sound LP Printed in U.S.A. 000501 SL10-1549
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
ARCHITECT & ENGINEER SPECIFICATIONS
The 20" wide wall mount shelf shall be Atlas Sound Model
____________ (AS-120, AS-140) or approved equal. Shelf shall be
constructed of 16-gauge CRS, ___________ (AS-120: welded or AS140: three piece bolt together with hardware), and include four mounting holes on 16" centers for stud mounting to a wall surface. Wire
access shall be provided by two 1
1
⁄2" holes on shelf bottom and one
1
1
⁄2
" hole on each side hanger. Weight capacity of the shelf shall
be______ (AS-120: 100 lbs., AS-140: 150 lbs.). The wall shelf shall
be finished in _________ epoxy. Model AS-120 shall include a 3⁄8"
front return for equipment retention. Model AS-140 shall be formed on
all four sides and include welded hanger gussets for versatile installation above or below side panel/hanger supports.
AS-140 ASSEMBLY AND MOUNTING INSTRUCTIONS
AS-120 MOUNTING REQUIREMENTS
Note: the mounting holes are on 16" centers. If your wall does
not have studs spaced 16" apart, install a solid cross support or
mounting plate.
INSTALLATION FOR SHELF
BELO
W
SUPPORTS
1. Determine location on the
wall for the shelf top surface.
2. Add an additional
7
⁄8
" (for the
additional height of the shelf
bottom) and make a level line.
3. Indicate and drill the four
bracket holes using the template on the shelf bottom as
indicated.
4. Bolt the hangers to shelf
bottom with supplied 4 qty.
10–32 x
1
⁄2" screws, nylon
washers, and nuts.
5. Mount the assembled shelf
to the wall using 4 screws or
lag bolts (by others). Note:
The bottom 2 bolts will go
through both the shelf bottom
and the side hangers.
INSTALLATION FOR SHELF
ABO
VE
SUPPORTS
1. Determine location on the
wall for the shelf top surface.
2. Indicate and drill the four
holes using the template of
the shelf top as indicated.
3. Bolt the hangers to shelf
top with supplied 4 qty.
10–32 x
1
⁄2" screws, nylon
washers, and nuts.
4. Mount the assembled shelf
to the wall using 4 screws or
lag bolts (by others). Note:
the top 2 bolts will go through
both the shelf top and the
side hangers).
Note: the mounting holes are on 16" centers. If your wall does not have studs spaced 16” apart, install a
solid cross support or mounting plate as shown below.
MTG. BOLTS (4)
MTG. BOLTS (4)
Wiring
Access
holes face
UP
Mark These
Four Holes
Level
Line
Cross Supports or Mounting Plates May
Be Used to Span Studs Not on 16" Spacing
Shelf Mounts
to Wall Studs
Spaced 16"
Apart
Level
Line
Level Line
Mark These
Four Holes
Wiring Access holes
face DOWN
Shelf Mounts
to Wall Studs
Spaced 16"
Be Used to Span Studs Not on 16" Spacing
Cross Supports or Mounting Plates May
Apart
Loading...