Atlas Metal Industries WSB-15, WSB-19 General Manual
SPECIAL APPLICATION DROP-INS
WATER STATION
Non-Mechanical, with Ice Chest
Item No.
Quantity
WSB-15
WSB-15 SHOWN
WSB-19
DESCRIPTION:
The WSB series water station and ice server
enables you to provide ice water service to your
serving counter, quickly and easily. A single
spigot glass filler is mounted over a drain
trough with removable anti-splash grate. A
large capacity ice chest is adjacent, provided
with a removable hinged lid. It’s everything you
need for ice water service.
The ice chest is fully insulated and the entire top
is provided with a factory applied gasket so that
it can be installed in the finest wood fixtures
without marring the counter top. The unit is
constructed of stainless steel and is provided
with separate drains for both the trough and the
ice chest.
FEATURES:
Chrome plated, lever action glass filler
Large capacity ice chest - fully insulated to
hold ice longer
Factory applied gasket - makes installation
a snap and seals units to the counter top,
thus eliminating seepage
Sanitary - provided with a drain trough, with
anti-splash grate.
NSF certified
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
SA-1
WATER STATION
Non-Mechanical, with Ice Chest
19”
4”
MODEL
WSB-15
WSB-19
CUT-OUT
REQUIRED
13-1/2” X 25-1/4”
17-1/4” X 22-1/4”
24”
Plan View
ICE CAPACITY
(lbs.)
40
60
1/4” Water Inlet
WSB-19 Shown
11” X 15” Opening
SHIP WT.
(lbs.)
40
40
27”
1/4” Water Inlet
3”
15 1/4”
WSB-15 Shown
11” X 15” Opening
Plan View
1/4” IPS Drain
TOP: Constructed of 18 gauge, type 304 stainless
steel, die stamped with a raised perimeter bead.
There shall be a solid vinyl gasket under the beaded
edge to form a seal to the counter top. A coved pan
insert is secured to the top, and is equipped with a
1/4” IPS drain and a removable anti-splash grate.
Mounted above the drain pan is a chrome plated,
brass glass filler with a volume regulator and stream
director.
ICE CHEST: The inner liner shall be 22 gauge, type
304 stainless steel. All corners are coved with a minimum 1/4” radius. A 1” dia. threaded drain fitting is
provided.
1”Drain
Elevation
14 1/4”
12 3/4”
17”
End View
1/4” IPS Drain
1”Drain
SPECIFICATIONS:
INSULATION: The pan is fully insulated with high
density polystyrene, 1” thick on all sides, 1-1/2” thick
on the bottom and enclosed with a 24 gauge galvanized steel outer liner.
LID: The ice chest is provided with a double pan,
insulated lid with a rubber, self-insulating hinge. The
entire lid is removable.
Specifications subject to change without notice.
ACCESSORIES:
Elevation
Pitcher and glass filler
14 1/4”
6 5/8”
13 1/4”
End View
SA-2
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
10/08-SC
Loading...