Atlas Metal Industries WICL-2, WICL-3, WICL-4, WICDL-3, WICDL-4 General Manual
Project: ___________
Item No.: ___________
Quantity: ___________
SLIM-LINE SERVING EQUIPMENT
SLIM-LINE
COLD PAN
Iced Cold Pan
4-5/8” Standard Depth
or 9-3/4” Full Depth
WICL-2
SPECIFICATIONS
TOP: Constructed of 18 gauge, type 304 stainless steel, die
stamped with a raised perimeter bead. There shall be a solid
vinyl gasket under the beaded edge to form a seal to the
counter top, thus preventing seepage or marring of the
counter top. Embossed mounting lugs are provided along
the inner surface of the top to hold a full set of removable
separator channels in place.
LINER: The inner liner shall be 18 gauge, type 304 stainless
steel, one piece construction, all welded, ground and polished to a uniform finish. All corners are coved with a minimum 1/4" radius. A 3/4" dia. drain with strainer, 4" PVC
nipple, and valve is provided.
WICL-2
WICL-3
WICL-4
WICDL-2
WICDL-3
WICDL-4
STANDARD FEATURES
Slim-line configuration - it can install in counters only
g
16” wide
g
Fully insulated to hold ice longer
g
Factory applied gasket - makes installation a snap and
seals units to the counter top, thus eliminating
seepage
g
Can be used for ice display, standard 12” x 20” pans
with the use of separator channel(s), or fractional size
pans with the use of optional adapter bars
g
1-Year Parts & Labor Warranty
g
NSF Certified
INSULATION: The pan is fully insulated with high density
polystyrene, 1" thick on all sides, 2" thick on the bottom and
enclosed with a 22 gauge galvanized steel outer case.
Specifications subject to change without notice.
* Units with these accessories are not currently UL listed.
ACCESSORIES
Stainless Steel adapter bars (pgs. DI-51-52)
g
Stainless Steel adapter plates (pgs. DI-51-52)
g
g
WFBL - Stainless steel perforated false bottom
g
CPL - Cover Plate with handles, S/S
RDVE - Rear Drain Valve Extension
g
DI-15
16”
A
8”
8”
WICL- 6-5/8”
WICDL- 11-3/4”
4-1/2”
2-3/4”
MODEL
WICL-2
WICDL-2
WICL-3
WICDL-3
WICL-4
WICDL-4
PLAN VIEW
PAN
OPENING
2
3
4
REMOVABLE SEPARATOR
CHANNELS
ELEVATION
PAN SIZE
11-7/8” X 41-3/4” X 4-5/8”
(30.1 X 106 X 11.7cm)
11-7/8” X 41-3/4” X 9-3/4”
(30.1 X 106 X 24.7cm)
11-7/8” X 63-1/2” X 4-5/8”
(30.1 X 161.2 X 11.7cm)
11-7/8” X 63-1/2” X 9-3/4”
(30.1 X 161.2 X 24.7cm)
11-7/8” X 85-1/4” X 4-5/8”
(30.1 X 216.5 X 11.7cm)
11-7/8” X 85-1/4” X 9-3/4”
(30.1 X 216.5 X 24.7cm)
CUT OUT
REQUIRED
14-1/4” X 44-1/4”
(36.1 X 112.3cm)
14-1/4” X 66”
(36.1 X 167.6cm)
14-1/4” X 87-3/4”
(36.1 X 222.8cm)
11-7/8” ID
14”
END VIEW
“A”
46”
(116.8cm)
67-3/4”
(172cm)
89-1/2”
(227.3cm)
4-5/8” ID - WICL
9-3/4” ID - WICDL
SHIP WT.
(LBS.)
45
(20.4kg)
48
(21.7kg)
132
(59.8kg)
139
(63kg)
150
(68kg)
158
(71.6kg)
Atlas Metal Industries 1135 NW 159th Dr. Miami, FL 33169 (800) 762-7565 Fax: (305) 623-0475 atlasfoodserv.com
DI-16
05/11-sc
Loading...