Atlas Metal WB, WSB-15, WB-19, WB-15, WSB User Manual

Subsidiary of Mercury Aircraft, Inc.

R

1135 N.W. 159th DR., MIAMI, FL 33169

PHONE [phone], FAX [phone], E-mail: [e-mail]

PARTS LIST ICE CHEST & WATER STATIONS

13

WB & WSB SERIES

WB SERIES WSB SERIES

14

WB-19 SHOWN

1

2

5

7

8

9

11

4

12

6

WSB-15 SHOWN

1

2

13

14

ITEM NUMBE

1 S81854-0 Lid Assembly
2 6043-0 Lid Handle
3 4043-1 Handle Screws (Not Shown)
4 7020-0 Nylon Spacer
5 3020-1 Faucet
6 S81806-0 Strainer
7 3018-0 1/2" Plastic Drain
8 47-102 1/2" Washer

9 2050-2 1/2" Nut

10 3019-0 1" Plastic Drain (Not Shown)
11 3100-0 1" Drain Washer
12 4200-0 1" Drain Nut
13 7002-0+Model # Vinyl Bead Gasket
14 S81809-0 Plastic Hinge
15 7030-0 Plastic Underlid (Not Shown)
16 3020-2 Picher and glass filler (Not Shown)

PART NUMBER DESCRIPTION

ICE CHEST & WATER STATIONS

WB & WSB SERIES

--------------------------------------------------------------------------------------------------------------------------------------------------------------------

INSTALLATION

Provide the correct counter cut-out opening (see chart below) and drop in. The vinyl gasket assures
complete seating. A non-toxic silicone seal may be used between the gasket and counter top (not
required).

NOTE: Units are supplied with a 1” I.P.S. Drain to be connected for draining and cleaning purposes.

--------------------------------------------------------------------------------------------------------------------------------------------------------------------

MODEL NUMBER CUT-OUT SIZE

WB-15 13 1/2 X 17 1/4

WB-19 17 1/4 X 22 1/4
WSB-15 13 1/2 X 25 1/4
WSB-19 17 1/4 X 22 1/4

OPERATION

The unit is ready to operate and should be level for draining purposes.

--------------------------------------------------------------------------------------------------------------------------------------------------------------------

MAINTENANCE

NEVER CLEAN PANS WITH A CHLORIDE BASED PRODUCT. CHLORIDES OR IMPROPER
CLEANING COULD SCAR, MARK AND/OR CORRODE PANS. DO NOT
ABRASIVE PRODUCTS. TO CLEAN USE SOAPY WARM WATER, RINSE THOROUGHLY TO
REMOVE ALL RESIDUES. FAILURE TO MEET THESE CONDITIONS WILL VOID
WARRANTY.

USE STEEL WOOL OR