Atlas Metal VGG5-2, VGG5 User Manual

VGG5

Protected by US Patent #D610,374

Single Sided

Self-Service Protector

FINISH:

Clear Anodized Aluminum

Powder Coat:

Black Silver

RAL#

LENGTHS:

-2 = 35-1/4" O.A. - 1 Section

-3 = 49" O.A. - 1 Section

-4 = 62-3/4" O.A. - 2 Sections

-5 = 76-1/2" O.A. - 2 Sections

-6 = 90-1/4" O.A. - 2 Sections Custom = ___________ O.A.

GLASS (Clear Tempered):

3/8" Front - Std

1/2" Front

Frosted

Anti - Reflective

Starfire

OPTIONS (*):

End Panel - LT

End Panel - RT

(*) Not all option available on all models Contact Factory for specific information For Mounting Options see Mounting Specifications Sheet

NSF/ANSI2 -2010 Standards Requirements:

This language is copied with permission of NSF International

5.35.7

5.35.7.1

5.35.7.2

5.35.7.3

5.35.7.5

5.35.7.10

5.35.6

5.35.6.1

Self service food shields

Maximum vertical distance between counter top and bottom leading edge of shield shall be 13 inches Minimum horizontal distance between the front inside edge of food and bottom leading edge of shield shall be 3/4 of the Max. vertical distance of 5.35.7.1 (.75 x 13” = 9.75”) The sum of a shield’s projected vertical plane (Y) and projec ted horizontal plane (X) shall be greater than or equal to 20 inches. Either (X) or (Y) may equal 0 Maximum horizontal distance between vertical, horizontal, and angled panels at post and framing member locations shell be 2 inches Food shields for use on mobile buff et counters shall conform to 5.35.7

A vertical barrier (end shield) shall be provided at each end of a foodshield. The vertical barrier shall be a minimum of 18 inches deep (fr ont to back) beginning at the bottom leading edge of the foodshield. The minimum height of the vertical barrier shall be equal to the overall height of the foodshield. The maximum distance from the bottom edge of the vertical barrier and counter top shall be 1.5 inches. A foodshield intended to be installed a maximum of 3" (76mm) from a building wall perpendicular to the foodshield is exem pt from the r equirements of 5.35.6 provided that the height of the building wall is not lower than the overall height of the foodshield.

L1*

( * - Middle support is centered unless L1 dimension is specified )

- Centerline Dimensions L / L1 - 60" Max (3/8" Glass)

- 66" Max (1/2" Glass) T1 - 96" Max in Single Section

(2) End Panels per unit unless otherwise specified. End panels are 1/4" clear tempered glass unless otherwise specified.

13 13/16

21 1/8

13 1/2

10/22/10