Atlas Metal VGG15 User Manual

Self service food shields

5.35.7.1

5.35.7.2

be 3/4 of the Max. vertical distance of 5.35.7.1 (.75 x 13” = 9.75”)

5.35.7.3

5.35.7.5

locations shell be 2 inches

5.35.7.10

Food shields for use on mobile buffet counters shall conform to 5.35.7

5.35.6

A vertical barrier (end shield) shall be provided at each end of a foodshield. The vertical barrier shall be

a minimum of 18 inches deep (front to back) beginning at the bottom leading edge of the foodshield.

The minimum height of the vertical barrier shall be equal to the overall height of the foodshield.

The maximum distance from the bottom edge of the vertical barrier and counter top shall be 1.5 inches.

5.35.6.1

A foodshield intended to be installed a maximum of 3" (76mm) from a building wall perpendicular to the

VGG15

Protected by US Patent 6,485,118 and US Patent D613,971

Other Patents Pending

Adjustable Self-Service Protector

FINISH:

Clear Anodized Aluminum

Powder Coat:

GLASS (Clear Tempered):

1/4" Front - Std

Frosted

Black Silver

RAL#

LENGTHS:

-2 = 35-1/4" O.A. - 1 Section

-3 = 49" O.A. - 1 Section

-4 = 62-3/4" O.A. - 2 Sections

-5 = 76-1/2" O.A. - 2 Sections

-6 = 90-1/4" O.A. - 2 Sections Custom = ___________ O.A.

NSF/ANSI 2 - 2010 Standards Requirements:

This language is copied with permission of NSF International

5.35.7

Maximum vertical distance between counter top and bottom leading edge of shield shall be 13 inches Minimum horizontal distance between the front inside edge of food and bottom leading edge of shield shall

The sum of a shield’s projected vertical plane (Y) and projected horizontal plane (X) shall be greater than or equal to 20 inches. Either (X) or (Y) may equal 0 Maximum horizontal distance between vertical, horizontal, and angled panels at post and framing member

OPTIONS (*):

End Panel - LT

End Panel - RT

(*) Not all options available on all models. Contact Factory for specific information. For Mounting Options, see Mounting Specification Sheet

foodshield is exempt from the requirements of 5.35.6 provided that the height of the building wall is not lower than the overall height of the foodshield.

L L1*

( * - Middle support is centered unless L1 dimension is specified )

- Centerline Dimensions L / L1 - 48" Max (1/4" Glass)

03/19/2011

7 9/16

5 1/4

9 13/16

(2) End Panels per unit unless otherwise specified. End panels are 1/4" clear tempered glass unless otherwise specified.

20 3/16

13 1/2

20 9/16

VGG15

POSITION #1

20 9/16

3 3/4

13 1/2

7 9/16

POSITION #2

21 7/16

3 3/16

11 3/4

GLASS POSITIONS

POSITION #3

22 1/16

11 7/16

2 3/8

Protected by US Patent 6,485,118 and US Patent D613,971

Adjustable Self-Service Protector

POSITION #5POSITION #4

11 3/4

10 1/4

2 7/8

16 3/4

1 3/4

19 9/16

14 1/2

5 1/4

14 5/16

4 1/8

20 9/16

END PANEL OPTIONS

FIXED OPEN FULL FIXED OPEN NOTCHED

20 3/16

13 13

FIXED FULL SINGLE

END PANEL

3 3/4

"X" = DISTANCE FROM FRONT

OF FLANGE TO CUT BACK POINT

"X"

3 3/4

FIXED NOTCHED

SINGLE END PANEL

ON END PANEL

Versa-Gard,LLC - 1094 Parkway Industrial Park Drive, Buford, GA 30518

03/19/12