Atlas Metal RML-2 User Manual

Project: ___________
Item No.: ___________
Quantity: ___________

SLIM-LINE DROP-IN SERVING EQUIPMENT

SLIM-LINE
COLD PAN

(3” Recessed Top)
Refrigerated with Side Coils
Self-Contained

RML-2

SPECIFICATIONS

TOP: Constructed of 18 gauge, type 304 stainless steel, die

stamped with a raised perimeter bead. There shall be a solid
vinyl gasket under the beaded edge to form a seal to the
counter top, thus preventing seepage or marring of the
counter top. Embossed mounting lugs are provided along the
inner surface, 3” down from the top, to hold the pan rails and
a full set of removable separator channels in place.

LINER: The inner liner shall be 18 gauge, type 304 stainless
steel with 3" recessed top, one piece construction, all welded,
ground and polished to a uniform finish. All corners are coved
with a minimum 1/4" radius. The liner has copper tubing firmly
soldered to the top 3” on all sides. A 3/4" dia. drain with
strainer, 4" PVC nipple, and valve is provided.

RML-2
RML-3
RML-4

STANDARD FEATURES

g

Slim-line configuration - it can install in counters only

19-1/4” wide

g

Fully insulated for maximum efficiency and energy

savings

g

Factory applied gasket - makes installation a snap and
seals units to the counter top, thus eliminating
seepage

Accommodates standard 12” X 20” pans with the use

g

of separator channel(s) and pan rails, or fractional size
pans with the use of optional adapter bars

g

1-Year Parts & Labor Warranty

g

NSF Certified; UL Recognized

INSULATION: The pan is fully insulated with high density
polystyrene, 1" thick on all sides, 2" thick on the bottom and
enclosed with a 22 gauge galvanized steel outer case.

REFRIGERATION SYSTEM: The compressor housing shall
be fabricated from formed angles and bolted to the base of
the unit. A fully self-contained condensing unit is provided,
with a hermetically sealed compressor and a thermostat con­trol. The system is fully charged with CFC free refrigerant and
ready to operate.

NOTE: Proper ventilation must be provided in counter

ELECTRICAL: The unit will be wired for 15 amps., 120 volt,

single phase operation, with an on/off switch and pilot light. A
6' long, 3-wire cord and plug (NEMA 5-15P) will be provided.

Specifications subject to change without notice.

* Units with these accessories are not currently UL listed.

ACCESSORIES

g

5YW - 5-Year Compressor Warranty

g

WFBL - Stainless steel perforated false bottom
Stainless Steel adapter bars (pgs. DI-51-52)

g

Stainless Steel adapter plates (pgs. DI-51-52)

g
g

CPL - Cover Plate with handles, S/S

g

2060-1 - Condensate Evaporator

g

RS - Remote on/off switch for counter mounting
RDVE - Rear Drain Valve Extension

g

* 220 Volt - 50 Cycle Compressor

g

DI-19

9-1/16”

18-1/8”

9-1/16”

A

REMOVABLE SEPARATOR

11-7/8” ID

CHANNELS

3”

11”

6”
2”

13”

S/S PAN

RAIL

MODEL

OPENING

RML-2 2

RML-3 3

RML-4 4

PAN

PLAN VIEW

“A” PAN SIZE

48-1/8”

(122.2cm)

69-7/8”

(177.4cm)

91-3/4”

(233cm)

11-7/8” X 41-3/4” X 9”

(30.1 X 106 X 22.8cm)

11-7/8” X 63-1/2” X 9”

(30.1 X 161.2 X 22.8cm)

11-7/8” X 85-1/4” X 9”

(30.1 X 216.5 X 22.8cm)

2-3/4”

7”

26-1/4”

ELEVATION

ELECTRICAL

CHARACTERISTICS

6.0 amps. - 120V ­1/4 HP

6.0 amps. - 120V ­1/4 HP

7.8 amps. - 120V ­1/3 HP

CUT-OUT

REQUIRED

16-1/2” X 46-1/2”

(41.9 X 118.1cm)

16-1/2” X 68-1/4”

(41.9 X 173.3cm)

16-1/2” X 90”

(41.9 X 228.6cm)

15-1/8”

END VIEW

SHIP WT.

(LBS.)

216

(98kg)

264

(119.7kg)

304

(137.9kg)

RMLX - REFRIGERATED COLD PAN WITHOUT

COMPRESSORS FOR REMOTE INSTALLATIONS

COMPRESSOR

Units include Refrigerated Cold Pan,

Thermostat, Expansion Valve & Drier (for hook up in

2029-5 - 1/4 HP for RMX-2 & 3
2029-6 - 1/3 HP for RMX-4

field by others)

Atlas Metal Industries 1135 NW 159th Dr. Miami, FL 33169 [phone] Fax: [phone] atlasfoodserv.com

DI-20

05/11-sc