Atlas Metal RBD-5 User Manual
Project: ___________
Item No.: ___________
Quantity: ___________
SLIDE-IN SERVING EQUIPMENT
REFRIGERATED
BASE
Self-Contained
Solid Top,
RB-4
SPECIFICATIONS
BODY: Double wall constructed with a 20 gauge, type 304
stainless steel interior liner, with coved corners. Exterior wall
is 22 gauge galvanized steel, with an 18 gauge stainless
steel facia. The body is filled with 1" of high density polystyrene insulation on all sides. The interior of the body is provided with a removable slide assembly to accommodate 12"
x 20" pans. A 2-1/2" dial thermometer is mounted in the facia.
DOORS: Doors are double wall constructed of 18 gauge,
type 304 stainless steel, fully insulated with high density
polyurethane and provided with edge mounted, chrome
plated hinges and a slam action latch. Doors are complete
with a moisture-proof gasket.
REFRIGERATION SYSTEM: The compressor housing is integral with the body of the unit and provided with a removable, louvered access panel. A fully self-contained
condensing unit is provided, with a hermetically sealed compressor and a thermostat control. The system is also provided with a forced air evaporator, for even temperature
throughout the base, which drains into a condensate evaporator, pre-wired in the unit. The system is fully charged with
CFC free refrigerant and ready to operate, factory set, between 35 and 45 degrees.
Under-Counter
RB-4
RB-5
RBD-5
STANDARD FEATURES
g
Slides into your counter - puts refrigeration where you
need it
g
Fully insulated for maximum efficiency
g
Slide assembly for standard 12” x 20” pans
Self-contained refrigeration
g
1-Year Parts & Labor Warranty
g
g
NSF Certified and UL Recognized
ACCESSORIES
g
5YW - 5-Year Compressor Warranty
g
18” x 26” Pan Rack (available on RB-4 only)
NOTE: Proper ventilation must be provided in counter
ELECTRICAL: The unit will be wired for 15 amp., 120 volt,
single phase operation. A 6' long, 3-wire cord and plug
(NEMA 5-15P) will be provided.
Specifications subject to change without notice.
DI-53
23-5/8”
“A”
PLAN VIEW
23-1/2”
GRILL
FRONT ELEVATION
MODEL “A”
RB-4
RB-5
RBD-5
55-1/2”
(140.9cm)
69-1/4”
(175.8cm)
69-1/4”
(175.8cm)
29”
STORAGE CAPACITY
12” X 20” PANS
10 Pans - 1 Door -
8 cu. ft.
15 Pans - 2 Doors -
10 cu. ft.
4 Pans - 1 Door
(2) 20X20X5” Drawers
20”
CUT-OUT
REQUIRED
23-1/2” X 55-1/2”
(59.6 X 140.9cm)
23-1/2” X 69-1/4”
(59.6 X 175.8cm)
23-1/2” X 69-1/4”
(59.6 X 175.8cm)
END VIEW
ELECTRICAL
CHARACTERISTICS
6.8 amps. - 120V
1/4 HP
6.8 amps. - 120V
1/4 HP
6.8 amps. - 120V
1/4 HP
23-5/8”
SHIP WT.
(LBS.)
270
(122.4kg)
340
(154.2kg)
440
(199.5kg)
Atlas Metal Industries 1135 NW 159th Dr. Miami, FL 33169 (800) 762-7565 Fax: (305) 623-0475 atlasfoodserv.com
DI-54
09/10-sc
Loading...