Atlas Metal PRC-5, PR-C User Manual
SNEEZE GUARDS
PROTECTOR CASE
PR Series
PRC
Protector case
PRCL
Protector case w/ lights
PRHC
Protector case w/ food warmer
PRHCL
Protector case w/ heat lamps - 18” H
PRVC
Vertical sneeze guard only
Item No.
Quantity
PRC SHOWN
MODEL
SIZE
-2 35-3/4” 500 500
-3 49-1/2” 800 750
-4 63-1/4” 1100 100
-5 77” 1400 1250
-6 90-3/4” 1400 1500
Note: Special voltages are available. Contact factory.
* Fluorescent light fixtures will add approximately 1 amp. to power load.
14”
“A”
(inches)
A
Rear Elevation
PRHC
(watts @ 120 V)
(watts @ 120 V)
15 1/4”
12”
End View
PRHCL
PRCL
shown
15 1/4”
12”
End View
SPECIFICATIONS:
Top shelf is constructed of 16 gauge stainless steel and
the uprights are constructed of 1” square stainless
steel tubing; all welded construction, ground and
polished to a uniform finish. The front is provided with
a solid glass panel, 1/4” laminated glass with seamed
edges, full length angled to meet NSF standards. The
unit is provided with concealed mounting stanchions
for ease of installation.
(PRCL - unit only) Provided with Fluorescent light fixture for 120/60/1 operation, prewired.*
(PRHC - unit only) Provided with food warmer
mounted under the top shelf for 120/60/1 operation,
pre-wired.
(PRHCL - unit only) Provided with individual heat
lamps mounted under the shelf for 120/60/1 operation,
pre-wired.
Specifications subject to change without notice.
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
10/08-SC
CW-47
Loading...