Atlas Metal PHD-TA-10 1-8, PDHTA User Manual
PDH-TA THERMAL AIR HEATING
PLATE DISPENSERS DROP-IN
SPECIFICATIONS
CONSTRUCTION:
The basic unit shall be constructed of 300 series
stainless steel. The dispensers shall be a drop-in,
self-leveling design.
The counter top flange has three, high impact,
plastic guide posts to align plates. The unit is self
supporting,with vertical side panels and a bottom
and top flange all welded to form the dispenser
body. The stainless steel dispenser head will be
suspended from the extension springs to support
the stack of plates to be dispensed.
PDH-TA
Basic construction with the addition of a base
mounted, THERMALLY PROTECTED FANMOTOR
& HEATING ELEMENT, for heat circulation, side
mounted thermostat, an additional stainless steel
shield which covers the spring mechanism and
vertical channel guides, flange mounted pilot
light and on-off switch. A six foot 16-3 cordset,
NEMA5-15P, will be provided.
SELF-LEVELING:
The spring mechanism is easy to adjust. A combination of extension springs will be provided for
field adjusting to the required dispensing height.
Project Name
NO# Item NO# Quantity
FOR HIGH VOLUME PLATEDISPENSING
FOR CAFETERIA OR TRAY MAKE-UP AREA
OPTIONS AND ACCESORIES
CONSULTTHE FACTORY FOR SPECIAL REQUIREMENTS
Special voltage
Special height
Pre-heat covers
“ALL PRICES AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE”
a subsidiary of Mercury Aircraft
1135 NW 159Dr.,Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
3A
PDH-TA THERMAL AIR HEATING
PLATE DISPENSERS DROP-IN
STANDARD FEATURES:
FIELD ADJUSTABLE FOR DIFFERENT WEIGHTS
•
ALL STAINLESS STEEL CONSTRUCTION
•
HIGH IMPACT PLASTIC GUIDE POSTS TO
•
ALIGN PLATES
THERMALLY PROTECTED FAN MOTOR FOR
•
HEAT CIRCULATION
SELF-LEVELING
PLATE DISPENSER
HEATED DROP-IN SHIELDED TUBE / THERMAL AIR
MODEL
NUMBER
PDH-TA-9 1/8 535 4.5 9-1/8” 12-1/2” 11-7/8” 28
PDH-TA-10 1/8 535 4.5 10-1/8” 13-1/2” 12-7/8” 33
PDH-TA-12 535 4.5 12” 15-3/8” 14-3/4” 35
PDH-TA-14 1/2 535 4.5 14-3/8” 17-7/8” 17-1/4” 38
“ALL PRICES AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE”
4A
ELEC @ 120V IPH
WATTS AMPS
MAXIMUM
PLATESIZE
OUTSIDE FLANGE
DIAMETER
a subsidiary of Mercury Aircraft
1135 NW 159 Dr.,Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
CUT-OUT
DIAMETER
SHIPPING WT.
(lbs.)
10/07-SC
Loading...