![](/html/75/75b1/75b13adf20db2ff93823cf87ef020a9ed0829351eddf27193c0dcfb6e81df600/bg1.png)
PLATE DISPENSERS OVAL
PDO - STANDARD
SPECIFICATIONS
CONSTRUCTION:
The basic unit shall be constructed of 300 series
stainless steel. The dispensers shall be a drop-in,
self-leveling design.
The counter top flange has four, high impact,
plastic guide posts to align plates. The unit is self
supporting,with vertical side panels and a bottom
and top flange all welded to form the dispenser
body. The stainless steel dispenser head will be
suspended from the extension springs to support
the stack of plates to be dispensed.
PDOS: Basic construction with an additional
outer stainless steel shield which covers the
spring mechanism and vertical channel guides.
PDOH: Basic construction with the addition of a
base mounted heating element, thermally protected fan motor, perforated dispenser head for
heat circulation, side mounted thermostat,flange
mounted pilot light and on-off switch. A six foot
16-3 cordset, NEMA 5-15P shall be provided.
PDOS - SHIELDED
•
PDOH - HEATED
•
Project Name
NO# Item NO# Quantity
FOR HIGH VOLUME PLATE DISPENSING
FOR CAFETERIA OR TRAYMAKE-UP AREA
PDO
PDOS
PDOH
SELF-LEVELING: The spring mechanism is easy
to adjust. A combination of extension springs will
be provided for field adjusting to the required
dispensing height.
OPTIONS AND ACCESORIES
CONSULTTHE FACTORY FOR SPECIAL REQUIREMENTS
Special voltage
Special height
Pre-heat covers
“ALL PRICES AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE”
a subsidiary of Mercury Aircraft
1135 NW 159Dr.,Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
2A
![](/html/75/75b1/75b13adf20db2ff93823cf87ef020a9ed0829351eddf27193c0dcfb6e81df600/bg2.png)
PLATE DISPENSERS OVAL
PDO - STANDARD
PDOS - SHIELDED
•
PDOH - HEATED
•
STANDARD FEATURES:
FIELD ADJUSTABLE FOR DIFFERENT WEIGHTS
•
ALL STAINLESS STEEL CONSTRUCTION
•
HIGH IMPACT PLASTIC GUIDE POSTS TO
•
ALIGN PLATES
THERMALLY PROTECTED FAN MOTOR FOR
•
HEAT CIRCULATION
NOTE: Sample of platter or tracing or irregularly shaped
NOTE: “L” indicates larger width. Height: PDO 28-1/4”
Contact factory for mobile dispensers enclosed & open
frame models.
dish must be supplied for fabrication.
PDOS-PDOH 29-1/4”
SELF-LEVELING
PLATE DISPENSER
PDO: PLATE DISPENSER OVAL
MODEL
PDO-8-1/2 8-1/2” x 6-5/8” 12” x 10-1/8” 11-3/16” x 9-5/16” 4.5 535
PDO-9-7/8 9-7/8” x 7-1/4” 13-3/8” x 10-3/4” 12-9/16” x 9-15/16” 4.5 535
PDO-9-7/8L 9-7/8” x 8-3/4” 13-3/8” x 12-1/4” 12-9/16” x 11-7/16” 4.5 535
PDO-10-1/2 10-1/2” x 8-3/8” 14” x 11-7/8” 13-3/16” x 11-1/16” 4.5 535
PDO-11-3/4 11-3/4” x 8-3/4” 15-1/4” x 12-1/4” 14-7/16” x 11-7/16” 4.5 535
PDO-11-3/4L 11-3/4” x 10-1/8” 15-1/4” x 13-5/8” 14-7/16” x 12-13/16” 4.5 535
PDO-12-5/8 12-5/8” x 9-1/2” 16-1/8” x 13” 15-5/16” x 12-13/16” 4.5 535
PDO-112-5/8L 12-5/8” x 10-7/8” 16-1/8” x 14-3/8” 15-5/16” x 13-9/16” 4.5 535
PDO-13-3/4 13-3/4” x 9-1/4” 17-1/4” x 12-3/4” 16-7/16” x 11-15/16” 4.5 535
PDO-13-3/4L 13-3/4” x 10-5/8” 17-1/4” x 14-1/8” 16-7/16” x 13-5/16” 4.5 535
PDO-14 14” x 9-7/8” 17-1/2” x 13-3/8” 16-11/16” x 12-9/16” 4.5 535
PDO-15 15” x 11” 18-1/2” x 14-1/2” 17-11/16” x 13-11/16” 4.5 535
MAXIMUM DISH SIZE
L W
OUTSIDE FLANGE OVERALL
L W
COUNTER CUT-OUT
L W
a subsidiary of Mercury Aircraft
1135 NW 159 Dr.,Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
AMPS WATTS
2B
10/07-SC