Atlas Metal PDH, PD User Manual
PLATE DISPENSERS DROP-IN
PD - UNHEATED
SPECIFICATIONS
CONSTRUCTION:
The model PD, PDS & PDH shall be drop-in self
leveling design, the basic unit shall be constructed
of series 300 stainless steel.
The counter top flange has three high impact
plastic guide posts to align plates, the unit is self
supporting using a formed stainless steel top
flange welded to vertical channels and bottom
disc, a stainless steel platform will be suspended
with extension springs to support the stack of
plates to be dispensed.
PDS - SHIELDED
•
PDH - HEATED DROP-IN
•
Project Name
NO# Item NO# Quantity
PDS: Same construction with an additional outer
stainless steel shield, which cover spring mechanism and vertical channel guides.
PDH: Same construction with the addition of a
base mounted heating element a side mounted
thermostat, pilot light and on-off switch located
in the top flange, a six foot 120V NEMA 5-15P
cordset.
SELF LEVELING: The spring mechanism is easy
to adjust a combination of extension springs will
be provided for field adjusting to the required
dispensing height.
MODEL PD - 8 1/8
FOR HIGH VOLUME PLATE DISPENSING
FOR CAFETERIA AND TRAYMAKE-UP AREA
OPTIONS AND ACCESORIES
CONSULTTHE FACTORY FOR SPECIAL REQUIREMENTS
Special voltage
Special height
Stainless steel trays to convert PD-12 to cup
dispenser
PD
PDS
PDH
“ALL PRICES AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE”
a subsidiary of Mercury Aircraft
1135 NW 159Dr.,Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
1
PLATE DISPENSERS DROP-IN
PD - UNHEATED
STANDARD FEATURES:
FIELD ADJUSTABLE
•
CAPACITY UP TO (72) PLATES OR (36) BOWLS
•
*Capacity may vary depending on plate or bowl manufacturer
UNDER COUNTER CLEARANCE, REQUIRES 27-1/2” TO 29”
•
UNHEATED DROP-IN OPEN TUBE
MODEL
PD-5 5” 8-3/8” 7-3/4” 12 lbs.
PD-5-3/4 5-3/4” 9-1/8” 8-1/2” 13 lbs.
PD-6-1/2 6-1/2” 9-7/8” 9-1/4” 14 lbs.
PD-7-1/4 7-1/4” 10-5/8” 10” 16 lbs.
PD-8-1/8 8-1/8” 11-1/2” 10-7/8” 18 lbs.
PD-9-1/8 9-1/8” 12-1/2” 11-7/8” 20 lbs.
PD-10-1/8 10-1/8” 13-1/2” 12-7/8” 23 lbs.
PD-12 12” 15-3/8” 14-3/4” 25 lbs.
PD-14-1/2 14-1/2” 17-7/8” 17-1/4” 37 lbs.
MAXIMUM
PLATESIZE
OUTSIDE FLANGE
DIAMETER
PDS - SHIELDED
•
CUT-OUT
DIAMETER
SHIPPING
WT.(lbs.)
PDH - HEATED DROP-IN
•
SELF-LEVELING
PLATE DISPENSER
UNHEATED DROP-IN SHIELDED TUBE
MODEL
PDS-5 5” 8-3/8” 7-3/4” 17 lbs.
PDS-5-3/4 5-3/4” 9-1/8” 8-1/2” 19 lbs.
PDS-6-1/2 6-1/2” 9-7/8” 9-1/4” 21 lbs.
PDS-7-1/4 7-1/4” 10-5/8” 10” 23 lbs.
PDS-8-1/8 8-1/8” 11-1/2” 10-7/8” 25 lbs.
PDS-9-1/8 9-1/8” 12-1/2” 11-7/8” 27 lbs.
PDS-10-1/8 10-1/8” 13-1/2” 12-7/8” 31 lbs.
PDS-12 12” 15-3/8” 14-3/4” 36 lbs.
PDS-14-1/2 14-1/2” 17-7/8” 17-1/4” 45 lbs.
MAXIMUM
PLATESIZE
OUTSIDE FLANGE
DIAMETER
HEATED DROP-IN SHIELDED TUBE
MODEL
PDH-5 210 1.8 5” 8-3/8” 7-3/4” 17 lbs.
PDH-5-3/4 240 2.0 5-3/4” 9-1/8” 8-1/2” 19 lbs.
PDH-6-1/2 270 2.3 6-1/2” 9-7/8” 9-1/4” 21 lbs.
PDH-7-1/4 300 2.5 7-1/4” 10-5/8” 10” 23 lbs.
PDH-8-1/8 330 2.8 8-1/8” 11-1/2” 10-7/8” 25 lbs.
PDH-9-1/8 380 3.2 9-1/8” 12-1/2” 11-7/8” 27 lbs.
PDH-10-1/8 420 3.5 10-1/8” 13-1/2” 12-7/8” 31 lbs.
PDH-12 500 4.2 12” 15-3/8” 14-3/4” 36 lbs.
PDH-14-1/2 550 4.6 14-1/2” 17-7/8” 17-1/4” 45 lbs.
ELEC @ 120V IPH
WATTS AMPS
MAXIMUM
PLATESIZE
OUTSIDE FLANGE
DIAMETER
CUT-OUT
DIAMETER
SHIPPING
WT.(lbs.)
CUT-OUT
DIAMETER
SHIPPING
WT.(lbs.)
a subsidiary of Mercury Aircraft
1135 NW 159 Dr.,Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
10/07-SC
2
Loading...