Atlas Metal N-2 Specifications
NAPKIN DISPENSER DROP-IN
MODEL - N
SPECIFICATIONS
CONSTRUCTION:
Dispenser shall have four corner angles of grade
18-8 stainless steel, 20 gauge, welded to the top
flange and the bottom to form the dispenser
body.
TOP FLANGE:
Shall be stainless steel grade 18-8, 18 gauge,
with beveled outer edge for strength and snug
counter fit. Plastic roller, spring loaded, mounted
horizontally to maintain pressure on napkins to
be dispensed.
SELF-LEVELING:
Two properly calibrated extension springs shall
be attached to the underside of the top flange
and the dispenser head, to support the load to be
dispensed.
Project Name
N# Item N# Quantity
FOR HIGH VOLUME DISPENSING
OF NAPKINS IN CAFETERIA
OR TRAY MAKE-UP AREA
N-1
N-2
N-3
N-4
N-5
N-6
OPTIONS AND ACCESORIES
Dispensers available to fit other size napkins
upon request
Special height
Additional roller for center folded napkins
“ALL PRICES AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE”
a subsidiary of Mercury Aircraft
1135 NW 159Dr.,Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
49
NAPKIN DISPENSER DROP-IN
MODEL - N
STANDARD FEATURES:
ALL STAINLESS STEEL CONSTRUCTION
•
PROPERLY CALIBRATED STEEL EXTENSION
•
SPRINGS
ADJUSTABLE TO DIFFERENT WEIGHT LOADS
•
SPRING LOADED PLASTIC ROLLER
•
SELF-LEVELING
NAPKIN
DISPENSER
N: DROP-IN NAPKIN DISPENSER
FLANGE OVERALL
MODEL
N-1 7” x 5-1/8” 9-1/4” 7-1/8” 7-1/8” 5-1/4” 8-9/16” 5-1/2”
N-2 5-3/8” x 4” 7-5/8” 6” 5-1/2” 4-1/8” 6-15/16” 4-3/8”
N-3 7-1/8” x 4-1/4” 9-3/8” 6-1/4” 7-1/4” 4-3/8” 8-11/16” 4-5/8”
N-4 8” x 4-1/2” 10-1/4” 6-1/2” 8-1/8” 4-5/8” 9-9/16” 4-7/8”
N-5 8-3/4” x 4-3/4” 11” 6-3/4” 8-7/8” 4-7/8” 10-5/16” 5-1/8”
N-6 7-1/8” x 6-7/8” 9-3/8” 8-7/8” 7-1/4” 7” 8-11/16” 7-1/4”
50
MAXIMUM
NAPKIN SIZE
“L” “W” “L” “W” “L” “W”
INSIDE OPENING COUNTER CUT-OUT
a subsidiary of Mercury Aircraft
1135 NW 159 Dr.,Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
“H”
24”
24”
24”
24”
24”
24”
10/07-SC
Loading...