MOBILE OPEN RACK DISPENSER
SPECIFICATIONS
CONSTRUCTION:
The open frame construction of the model MOR
consistsof1 “O.D.grade 18-8 stainlesssteeltubing
welded to a grade 18-8 solid stainless steel upper
horizontal and verticalguide rods welded to the 1”
O.D. tubing. The base shall be reinforced with
heavy gauge full length stainless steel angles for
added strength. Supplied with empty rack guides
welded to the base.
RACK CARRIER: Shall be 16 gauge stainless steel
grade 18-8 #3 finish removable for cleaning.
MOR
Project Name
NO# Item NO# Quantity
SELF LEVELING: Elevators shall be stainless steel
die stamped telescoping tubing non-fatiguing
compression type springs stainless steel totally
enclosed.
CORNER BUMPERS: Shall be gray nonmarking
vinyl attached securely to the base.
CASTERS: Shall be 4” swivel heavy duty with
optional brake.
MODEL MOR-1020
MOR-1020
MOR2-1020
MOR-2020
MOR-18J
FOR HIGH VOLUME DISPENSING OFRACKS
FOR CAFETERIA AND TRAYMAKE-UP AREA
OPTIONS AND ACCESORIES
Wrap around bumpers
Locking casters (2)
Napkin dispensers
Dispensers available to fit other size racks
available upon request
“ALL PRICES AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE”
a subsidiary of Mercury Aircraft
1135 NW 159Dr.,Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
13
MOR
MOBILE OPEN RACK DISPENSER
SPECIFICATIONS:
RACK CAPACITIES VARY WITH THE SIZE AND
TYPE OF RACKS USED.
*MODEL MOR2-1020 DISPENSES TWO
SEPARATE STACKS OF RACKS
BUMPERS ADD 1-3/4” TO L & W
SELF-LEVELING
CUP & GLASS
RACK DISPENSER
MODEL MOR
14
MER: MOBILE ENCLOSED RACK/DISPENSER
MODEL MAXIMUM RACK SIZE LENGTH • WIDTH SHIPPING WEIGHT
MOR-1020 10-1/4” x 20-1/4” 22-1/4” x 15-3/8” 70 LBS.
*MOR2-1020 10-1/4” x 20-1/4” 23-1/2” x 25-3/8” 76 LBS.
MOR-2020 20-1/4” x 20-1/4” 22-1/4” x 25-3/8” 75 LBS.
MOR-18J 18” Diameter 22-1/8” x 23-3/8” 74 LBS.
a subsidiary of Mercury Aircraft
1135 NW 159 Dr.,Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
10/07-SC