Atlas Metal MCR-2020 User Manual
MOBILE CANTILEVER RACK DISPENSER
SPECIFICATIONS
CONSTRUCTION:
The construction of the model MCR consists of a
stainless steel exterior base, top and cabinet
housing, all welded. The base shall be heavily
reinforced with support channels for added
strength.
HANDLE: Shall be 1” O.D. stainless steel.
TRAY CARRIER: The cantilevertray platform shall
be. constructed of grade 18-8 stainless steel.
MCR
Project Name
NO# Item NO# Quantity
SELF LEVELING: Dispensing height shall be
adjustable by adding or removing extension
springs located behind the removable access
panel of grade 18-8 stainless steel. The cantilevered platform shall be self leveling with
heavy duty bearings and bearing guides.
CORNER BUMPERS: Shall be gray nonmarking
vinyl attached securely to the base.
CASTERS: Shall be 4” swivel heavy duty with
optional brake.
MODEL MCR-2020
with optional wrap around bumper
MCR-1020
MCR-2020
FOR HIGH VOLUME CUP DISPENSING
FOR CAFETERIA AND TRAYMAKE-UP AREA
OPTIONS AND ACCESORIES
Wrap around bumpers
Locking casters (2)
Dispensers available to fit other size racks
upon request
“ALL PRICES AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE”
a subsidiary of Mercury Aircraft
1135 NW 159Dr.,Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
25
MCR
MOBILE CANTILEVER RACK DISPENSER
SPECIFICATIONS:
RACK CAPACITIES VARY WITH THE SIZE
AND TYPE OF RACKS USED
BUMPERS ADD 1-3/4” TO L & W
TOTAL LOAD CAPACITY: 250 LBS.
SELF-LEVELING
CUP & GLASS
RACK DISPENSER
26
MCR: MOBILE CANTILEVER RACK/DISPENSER
MODEL MAXIMUM TRAYSIZE LENGTH • WIDTH SHIPPING WEIGHT
MCR-1020 10-1/4” x 20-1/4” 20” x 21” 110 LBS.
MCR-2020 20-1/4” x 20-1/4” 30” x 21” 123 LBS.
a subsidiary of Mercury Aircraft
1135 NW 159 Dr.,Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
10/07-SC
Loading...