Atlas Metal HB-4, HB-3 Parts List

Subsidiary of Mercury Aircraft, Inc.
1135 N.W. 159th DR., MIAMI, FL 33169
PHONE (305) 625-2451, (800) 762-7565, FAX (305) 623-0475, E-mail:
sales@atlasfoodserv.com
PARTS LIST ELECTRICAL HEATED BASE
1
2
3
7
4
6
5
8
10
ITEM
NUMBER
1 2 22-1407
3 1100-0 4 1105-0
5 6
7 S83753-0 Pan Rack 8
9 S83754-3 10 6053-8 11 1087-0 12 2500-1
13
9
P ART
NUMBER
1001-0 1002-0 Power Cord 14/3-15 Amps 120V
7010-3 7013-3 #4 & #5 Door Gasket
S83754-4 Door Assembly HB-5
6055-1 Slam Action Latch 6052-1 Slam Action W/ Lock
1053-0 1054-0 208V / 850W Element (Not Shown)
1055-0 240V / 850W Element (Not Shown)
120V / 850W Element (Not Shown)
HB-4 SHOWN

DESCRIPTION

Power Cord 14/3-15 Amps 240V
Thermostat Knob
Pilot Light
Thermometer
#3 & #4 Door Gasket
Door Assembly HB-3, HB-4
Hinge & Cover
Cord Connector (Not Shown)
Thermostat (Not Shown)
SLIDE- IN HEATED BASE
HB SERIES
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------

OPERATION

The unit is ready to operate as soon as it is plugged in and turned on. The thermostat has an off position and numbers from #1 through #10 (number 10 is the highest setting). The unit is supplied with a power cord and NEMA plug. Refer to the data plate for the amperage and voltage information. Use a licensed electrician when installing power source.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------

MAINTENANCE

NEVER CLEAN THE UNIT WITH A CHLORIDE BASED PRODUCT. CHLORIDES OR IMPROPER CLEANING COULD SCAR, MARK AND/OR CORRODE METAL. DO NOT ABRASIVE PRODUCTS. TO CLEAN USE SOAPY WARM WATER, RINSE THOROUGHLY TO REMOVE ALL RESIDUES. FAILURE TO MEET THESE CONDITIONS WILL VOID WARRANTY.
USE STEEL WOOL OR
Loading...