Atlas Metal DSRMBU-3240 Specifications
D E S I G N E R S E R I E S
MOBILE COLD
SERVING UNIT
Buf fet Style Refrigerated Cold Pan
Quantity Item No.
DSRMBU-3240
DSRMBU-3254
DSRMBU-3268
DSRMBU-3285
MODEL #DSRMBU-3254-OW
Shown with accessories
VISCAYA - VS
Brass finish on frame rich mahogany plastic
laminate panels with
trim molding.
OMNI - OM
Gray finish on frame plastic laminate panels
of operator’s choice.
OAKWOOD - OW
Brass finish on frame light oak plastic laminate panels.
Keeps salads, sandwiches, desserts... chilled entrees or appetizers,
fresh, crisp and appealing throughout the serving occasion. Your
customers will see and taste the difference.
This attractive Designer Series unit can stand alone or become an
integral part of your total serving system.
Quality construction, Atlas’ exclusive Reversa-Panel and heavy
gauge stainless steel tops promise years of cost efficient, troublefree service.
Atlas... Serving systems that serve you best!
DESIGNER SERIES FEATURES
Reversa Panel easy access,
reversible, interchangeable
designer panels - available
as an accessory
Stainless Steel LEVER-LATCH
locking system
Adjustable height, leveling
casters
Concealed, heavy-duty, nonmarking neoprene wheels
with locking brakes
Solid, die-cast brass or
chromeplated brackets
Unibody construction with 45
degree designer look corner
supports
Durable stainless steel tops
One person room-to-room
mobility
Easy access flip top breath
guards on all buffet units available as an accessory
All units fit through standard
36” doors
Most flexible decor package
in the industry
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
DS-39
D E S I G N E R S E R I E S
MOBILE COLD SERVING UNIT
Buffet Style - Refrigerated Cold Pan
MODEL “A”
DSRMBU-3240 40” 25”L x 20”W x 4-5/8”D
DSRMBU-3254 54” 37-1/2”L x 20”W x 4-5/8”D
DSRMBU-3268 68” 54-1/4”L x 20”W x 4-5/8”D
DSRMBU-3285 85” 69-1/8”L x 20”W x 4-5/8”D
NOTE:
When ordering OMNI, add - OM to model number;
When ordering VISCAYA, add - VS to model number;
When ordering OAKWOOD, add - OW to model number.
TOP: Top constructed of 16 gauge, type 304 stainless steel, die-formed, welded, buffed and polished toa uniform finish. The cold pan will accommodate 12’ x 20” pans of 2-1/2” and 4” depth, and
fractional size pans. OMNI: The Atlas Edge runs
the full length of the top and consists of a double
45 degree angle with a polished finish.
LINER: The inner liner shall be 18 gauge, type 304
stainless steel, one piece construction, all welded, ground and polished to a uniform finish. All
corners are covered with a minimum 1/4” radius.
The liner has copper tubing firmly soldered to the
top 3” of all sides. A 3/4” dia. drain with strainer,
4” PVC nipple, and valve is provided.
INSULATION: The pan is fully insulated with high
density polystyrene, 1” thick on all sides, 1-1/2”
thick on the bottom and enclosed with a 22
gauge galvanized steel outer liner.
BODY: End mullions are die-formed, 18 gauge
paint grip steel, all welded box beam construction. Interior sides are enclosed with 20 gauge
paint grip steel panels attached to the end mullions. End mullions are joined at the top, front and
rear by a 6-1/2” apron running the full length of
the unit. Corner sections are formed with 45
degree angles on all sides for the designer look.
End mullions are joined at the bottom with a full
length angle iron frame. Steel surfaces are
finished with urethane based paint.
ALL SIDES: Constructed of ngidized honeycomb
material with plyshield plywood stringers. Panel
is framed with 5/8”x 1” polyethylene and a plastic laminate front. Rear is finished with a backing
sheet to insure watertight integrity. OMNI: 45
degree designer corners are painted bright gray
with a urethane based paint Solid color mica
panels in operator’s choice.
OAKWOOD: 45 degree designer corners are mirror finish brass-look. Light oak-look mica panels
complete the appearance package. VISCAYA: 45
REFRIGERATED PAN
DIMENSIONS
A
31 1/4”
Plan View
35 5/8”
Rear Elevation
SPECIFICATIONS:
degree designer corners are mirror finish brasslook. Rich mahogany-look mica front panels.
REFRIGERATION SYSTEM: A 1/4 HP (1/2 HP on
DSRMBU-3285 only) self-contained condensing
unit with a hermetically sealed compressor is
provided along with a factory pre-set temperature pressure control, which is field adjustable.
The condensing unit is provided with an enclosure of 18 gauge steel. A removable grill is
included for air circulation and access to the
refrigeration system.
ADJUSTABLE CASTERS: N.S.F. listed, 5” diameter, non-marking neoprene rubber tired swivel
casters. Two casters have foot operated locking
brakes. All Designer Series units feature Atlas’
exclusive adjustable height, leveling casters.
LOCKING DEVICES: When two or more units are
ordered. Atlas’ unique Lever-Latch locking system includes an exclusive interlocking stainless
lock under the top counter on the customer’s
side and a positive action LeverLatch on the
operator’s side.
ELECTRICAL: 15 amp, 120 volt, 60 cycle, single
phase operation with an illuminated on/off
switch located on the operator’s side and a 6 foot
long, 3-wire cord and plug (NEMA-5-15P). A cord
holder is provided, under the end mullion on
operator’s right, unless specified otherwise.
DSRMBU-3240
DSRMBU-3254
DSRMBU-3268
DSRMBU-3285
End View
ACCESSORIES:
Tray slide, 12” wide, solid, ribbed, folddown.
OMNI : all stainless steel with highlighted edge;
OAKWOOD & VISCAYA: all stainless steel.
Buffet canopy, features Atlas’ unique
flip-top sneeze guard on customer’s side
only - SAR Plexiglas. Canopy body is of millwork
construction with plastic laminate
finish. OMNI: stainless steel top with highlighted edge and chrome plated brackets;
OAKWOOD & VISCAYA: stainless steel top
with brackets.
Fluorescent light under canopy.
Stainless steel legs with adjustable feet,
in lieu of casters.
Reversa-Panel an alternate plastic laminate
is substituted for backing sheet on the rear.
The panel may then be reversed in the field, with-
out the use of tools, to create an alternate
look.
Specifications subject to change without
notice.
DS-40
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
10/08-SC
Loading...