Page 1
D E S I G N E R S E R I E S
MOBILE COLD
SERVING UNIT
Refrigerated Cold Pan
Quantity Item No.
DSRM-3240
DSRM-3254
DSRM-3268
DSRM-3285
VISCAYA - VS
Brass finish on frame rich mahogany plastic
laminate panels with
trim molding.
Keeps salads, sandwiches, desserts... chilled entrees or appetizers,
fresh, crisp and appealing throughout the serving occasion. Your
customers will see and taste the difference.
MODEL #DSRM-3254-VS
Shown with accessories
OMNI - OM
Gray finish on frame plastic laminate panels
of operator’s choice.
OAKWOOD - OW
Brass finish on frame light oak plastic laminate panels.
This attractive Designer Series unit can stand alone or become an
integral part of your total serving system.
Quality construction, Atlas’ exclusive Reversa-Panel and heavy
gauge stainless steel tops promise years of cost efficient, troublefree service.
Atlas... Serving systems that serve you best!
DESIGNER SERIES FEATURES
Reversa Panel easy access,
reversible, interchangeable
designer panels - available
as an accessory
Chromeplated, die cast
Cam-lock locking system
Adjustable height, leveling
casters
Concealed, heavy-duty, nonmarking neoprene wheels
with locking brakes
Solid, die-cast brass or
chromeplated brackets
Unibody construction with 45
degree designer look corner
supports
Durable stainless steel tops
One person room-to-room
mobility
All units fit through standard
36” doors
Most flexible decor package
in the industry
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
DS-5
Page 2
D E S I G N E R S E R I E S
MOBILE COLD SERVING UNIT
Refrigerated Cold Pan
MODEL “A” COLD PAN DIMENSIONS
DSRM-3240 40” 25”L x 20”W x 4-5/8”D
DSRM-3254 54” 37-1/2”L x 20”W x 4-5/8”D
DSRM-3268 68” 54-1/4”L x 20”W x 4-5/8”D
DSRM-3285 85” 69-1/8”L x 20”W x 4-5/8”D
NOTE: Furnished with adapter bars.
NOTE:
When ordering OMNI, add - OM to model number;
When ordering VISCAYA, add - VS to model number;
When ordering OAKWOOD, add - OW to model number.
31”
35 3/8”
A
Plan View
Rear Elevation
DSRM-3240
DSRM-3254
DSRM-3268
DSRM-3285
End View
TOP: Top constructed of 16 gauge, type 304 stainless steel, die-formed, welded, buffed and
polished to a uniform finish. The cold pan will
accommodate 12” x 20” pans of 2-1/2” and 4”
depth, and fractional size pans. OMNI: The Edge
runs the full length of the top and consists of a
double 45 degree angle with a polished finish.
LINER: The inner liner shall be 18 gauge, type 304
stainless steel, one piece construction, all
welded, ground and polished to a uniform finish.
All corners are covered with a minimum 1/4”
radius. The liner has copper tubing firmly soldered to the top 3” of all sides. A 3/4” dia. drain
with strainer, 4!’ PVC nipple, and valve is provided.
INSULATION: The pan is fully insulated with high
density polystyrene, 1” thick on all sides, 1-1/2”
thick on the bottom and enclosed with a 22 gauge
galvanized steel outer liner.
BODY: End mullions are die-formed, 18 gauge
paint grip steel, all welded box beam construction. Interior sides are enclosed with 20 gauge
paint grip steel panels attached to the end
mullions. End mullions are joined at the top, front
and rear by an apron running the full-length of the
unit; apron is 6-1/2” on the front and 8” on the rear.
Corner sections are formed with 45 degree angles
on thefront for the designerlook. End mullions are
joined at the bottom with a full length angle iron
frame, supporting a removable stainless steel
bottom shelf. Steel surfaces are finished with
urethane based paint.
FRONT AND SIDES: Constructed of rigidized
honeycomb material with plyshield plywood
stringers. Panel is framed with 5/8” x 1” polyethylene and a plastic laminate front. Rears is finished
with a backing sheet to insure watertight integrity. OMNI: 45 degree designer corners are painted
bright gray with a urethane based paint. Solid
SPECIFICATIONS:
color mica panels in operator’s choice.
OAKWOOD: 45 degree designer corners are mirror finish brasslook. Light oak-look mica panels
complete the appearance package. VISCAYA: 45
degree designer corners are, mirror finish brasslook. Rich mahogany-look mica front panels feature stained and sealed hardwood trim.
ADJUSTABLE CASTERS: N.S.F listed,5” diameter,
non-marking neoprene rubber tired swivel
casters. Two casters have foot operated locking
brakes. All Designer Series units feature Atlas’
exclusive adjustable height, leveling casters.
LOCKING DEVICES: When two or more units are
ordered. Atlas’ unique cam-lock locking system
includes an exclusive interlocking stainless lock
under the top counter on the customer’s side and
a positive action cam-lock on the operator’s side.
ELECTRICAL: 15 amp, 120 volt, 60 cycle, single
phase operation with an illuminated on/off
switch located on the operator’s side and a 6 foot
long, 3-wire cord and plug (NEMA-5-15P). A cord
holder is provided, under the end mullion on
operator’s right, unless specified otherwise.
REFRIGERATION SYSTEM: A 1/4 HP (1/2 HP on
DSRM-3285 only) self-contained condensing unit
with a hermetically sealed compressor is provided along with a factory pre-set temperature
pressure control, which is field adjustable. The
condensing unit is provided with an enclosure of
18 gauge steel. A removable grill is included for
air circulation and access to the refrigeration system.
2ACCESSORIES:
Tray slide, 12” wide, solid, ribbed, folddown. OMNI: all stainless steel with highlighted edge; OAKWOOD & VISCAYA: all
stainless steel.
Work shelf, 8” wide, stainless steel, flat,
fold-down.
Double deck display case, with
Laminated Glass shelves and sneeze guards.
OMNI; stainless steel frame and chrome plated
brackets; OAKWOOD & VISCAYA; millwork
frame with plastic laminate finish and brass
plated brackets.
Laminated glass and sneeze guards for
display case (set of four).
Buffet canopy, features Atlas’ unique
flip-top sneeze guard on customer’s side
only - SAR Plexiglas. Canopy body is of millwork
construction with plastic laminate
finish. OMNI: stainless steel top with highlighted
edge and chrome plated brackets; OAKWOOD & VISCAYA: stainless steel top with brass
plated brackets.
Curved Plexiglas sneeze guard.
Fluorescent light under high shelf or canopy.
Stainless steel legs with adjustable feet,
in lieu of casters.
Stainless steel middle shelf.
Stainless steel sliding doors.
Reversa-Panel an alternate plastic laminate
is substituted for backing sheet on the rear. The
panel may then be reversed in the field, without
the use of tools, to create an alternate look.
Specifications subject to change without notice.
DS-6
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
10/08-SC
Loading...