Page 1
D E S I G N E R S E R I E S
MOBILE HOT
SERVING UNIT
Buf fet Style
Quantity Item No.
DSHBU-3240
DSHBU-3254
DSHBU-3268
DSHBU-3285
MODEL #DSHBU-3254-OW
Shown with accessories
GALAXY - GL
Red finish on frame gray plastic laminate
panels with red grid
pattern.
VISCAYA - VS
Brass finish on frame rich mahogany plastic
laminate panels with
trim molding.
OMNI - OM
Gray finish on frame plastic laminate panels
of operator’s choice.
OAKWOOD - OW
Brass finish on frame light oak plastic laminate panels.
Keeps hot food hot, eye appealing and at the peak of perfection
throughout the serving occasion. Your customers will see and taste
the difference.
This attractive Designer Series unit can stand alone or become an
integral part of your total serving system.
Quality construction, Atlas’ exclusive Reversa-Panel and heavy
gauge stainless steel tops promise years of cost efficient, troublefree service.
Atlas... Serving systems that serve you best!
DESIGNER SERIES FEATURES
Reversa Panel easy access,
reversible, interchangeable
designer panels - available
as an accessory
Stainless Steel LEVER-LATCH
locking system
Adjustable height, leveling
casters
Concealed, heavy-duty, nonmarking neoprene wheels
with locking brakes
Solid, die-cast brass or
chromeplated brackets
Unibody construction with 45
degree designer look corner
supports
Durable stainless steel tops
One person room-to-room
mobility
Easy access flip top breath
guards on all buffet units available as an accessory
All units fit through standard
36” doors
Most flexible decor package
in the industry
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
DS-35
Page 2
D E S I G N E R S E R I E S
MOBILE HOT SERVING UNIT
Buffet Style
MODEL “A”
DSHBU-3240 40” 2
FOOD
WELLS
ELECTRICAL
CHARACTERISTICS
15 amp, 208 volt
1 phase, 1.8 kw
NEMA
CONFIG.
6-15P
31”
DSHBU-3240
DSHBU-3254
DSHBU-3268
DSHBU-3285
DSHBU-3254 54” 3
DSHBU-3268 68” 4
DSHBU-3285 85” 5
OTE: Electrical characteristics subject to change when electrical accessories
N
re added.
a
15 amp, 208 volt
1 phase, 2.55 kw
30 amp, 208 volt
1 phase, 3.4 kw
30 amp, 208 volt
1 phase, 4.25 kw
NOTE:
When ordering OMNI, add - OM to model number;
When ordering GALAXY, add - GL to model number;
When ordering VISCAYA, add - VS to model number;
When ordering OAKWOOD, add - OW to model number.
TOP: Top constructed of 18 gauge, type 304 stainless steel, die-formed, welded, buffed and polished to a uniform finish. Die-formed 12” x 20”
wells are provided with 1/8” raised perimeter
bead. Each insulated stainless steel well is 6”
deep and comes with a 850 watt/208 volt heating
element and individual infinite heat control.
OMNI and GALAXY: The Atlas Edge runs the full
length of the top and consists of a double 45
degree angle with a polished finish.
BODY: End mullions are die-formed, 18 gauge
paint grip steel, all weldedbox beam construction.
Interior sides are enclosed with 20 gauge paint
grip steel panels attached to the end mullions. End
mullions are joined at the top, front and rear by a 61/2” apron running the full length of the unit.
Corner sections are formed with 45 degree angles
on all sides for the designer look. End mullions are
joined at the bottom with a full length angle iron
frame. Steel surfaces are finished with urethane
based paint.
ALL SIDES: Constructed of rigidized honeycomb
material with plyshield plywood stringers. Panel is
framed with 5/8” x 1” polyethylene and a plastic
laminate front. Rear is finished with a backing
sheet to insure watertight integrity. OMNI: 45
degree designer corners are painted bright gray
with a urethane based paint.Solid color mica panels in operator’s choice. GALAXY: 45 degree
designer corners sections are painted bright red
with a urethane based paint. Atlas’ unique “grid
pattern” is permanently screened and laminated
in the mica. OAKWOOD: 45 degree designer corners sections are mirror finish brass-look. Light
oak-look mica panels complete the appearance
package. VISCAYA: 45 degree designer corners
are mirror finish brass-look. Rich mahogany-look
mica front panels
feature stained and sealed hardwood trim.
ADJUSTABLE CASTERS: N.S.F listed, 5” diameter, non-marking neoprene rubber tired swivel
casters. Two casters have foot operated locking
brakes. All Designer Series units feature Atlas’
exclusive adjustable height, leveling casters.
LOCKING DEVICES: When two or more units are
ordered. Atlas’ unique Lever-Latch locking system includes an exclusive interlocking stainless
lock under the top counter on one side and a
positive action Lever-Latch on the other side.
ELECTRICAL: Internally wired for 208 volt, single
phase operation and will be provided with a 6-foot
cord and plug. A cord holder is provided under the
end mullion, unless specified otherwise.
6-20P
6-30P
6-30P
31 1/4”
35 3/8”
Rear Elevation
SPECIFICATIONS:
Plan View
End View
ACCESSORIES:
Tray slide, 12” wide, solid, ribbed, folddown.
OMNI & GALAXY: all stainless steel with
highlighted edge; OAKWOOD & VISCAYA: all
stainless.
Buffet canopy, features Atlas’ unique flip-top
sneeze guard on customer’s side only - SAR
Plexiglas. Canopy body is of millwork construction with plastic laminate
finish. OMNI & GALAXY: stainless steel top
with highlighted edge and chrome plated
brackets; OAKWOOD & VISCAYA: stainless
steel top with laminate inlay on front edge
and brass plated brackets.
Food warmer under canopy.*
Fluorescent light under canopy.**
Curved Plexiglas sneeze guard.
Drain line manifold to single drain valve.
Drain valve for each well to single drain line.
Stainless steel legs with adjustable feet, in
lieu of casters.
Reversa-Panel an alternate plastic laminate
is substituted for backing sheet on the rear.
The panel may then be reversed in the field,
without the use of tools, to create an alternate look.
*Recommended for slow moving lines.
**Change in electrical required, contact factory.
Specifications subject to change without notice.
DS-36
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
10/08-SC
Loading...