Atlas Metal DSCUO-I-3232, DSCUI-3232 Specifications
D E S I G N E R S E R I E S
MOBILE
CORNER UNIT
Quantity Item No.
DSCUI-3232
DSCUO-3232
MODEL #DSCUO-3232-VS
GALAXY - GL
Red finish on frame gray plastic laminate
panels with red grid
pattern.
VISCAYA - VS
Brass finish on frame rich mahogany plastic
laminate panels with
trim molding.
OMNI - OM
Gray finish on frame plastic laminate panels
of operator’s choice.
OAKWOOD - OW
Brass finish on frame light oak plastic laminate panels.
Increases your serving flexibility and sales per square foot by turning wasted space in profitable serving space. And, corner units provide better continuity to improve traffic flow. Available in either
inside or outside configurations.
This attractive Designer Series unit can stand alone or become an
integral part of your total serving system.
Quality construction, Atlas’ exclusive Reversa-Panel and heavy
gauge stainless steel tops promise years of cost efficient, troublefree service.
Atlas... Serving systems that serve you best!
DESIGNER SERIES FEATURES
Reversa Panel easy access,
reversible, interchangeable
designer panels - available
as an accessory
Chromeplated, die cast
Cam-lock locking system
Adjustable height, leveling
casters
Concealed, heavy-duty, nonmarking neoprene wheels
with locking brakes
Unibody construction with 45
degree designer look corner
supports
Durable stainless steel tops
One person room-to-room
mobility
All units fit through standard
36” doors
Most flexible decor package
in the industry
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
DS-19
D E S I G N E R S E R I E S
MOBILE CORNER UNIT
31”
DSCUO-3232
DSCUI-3232
35 3/8”
NOTE:
When ordering OMNI, add - OM to model number;
When ordering GALAXY, add - GL to model number;
When ordering VISCAYA, add - VS to model number;
When ordering OAKWOOD, add - OW to model number.
TOP: Top constructed of 16 gauge, type 304 stainless steel, die-formed, welded, butted and polished to a uniform finish. OMNI and GALAXY: The
Atlas Edge runs the full length of the top and consists of a double 45 degree angle with a
polished finish. OAKWOOD and VISCAYA: A mica
inlay runs the full length of the top to provide extra
durability and aesthetic enhancement.
BODY: End mullions are die-formed, 18 gauge
paint grip steel, all welded box beam construction. Interior sides are enclosed with 20 gauge
paint grip steel panels attached to the end mullions. End mullions are joined at the top, front and
rear by an apron running the full-lengthof the unit;
apron is 6-1/2” on the front and 8” on the rear.
Corner sections are formed with 45 degree angles
on the front for the designer look. End mullions are
joined at the bottom with a full length angle iron
frame. Steel surfaces are finished with Permakote
urethane based paint.
FRONT AND SIDES: Constructed of rigidized
honeycomb material with plyshield plywood
stringers. Panel is framed with 5/8” x 1” polyethylene and a plastic laminate front. Rear is finished
with a backing sheet to insure watertight integrity.
DSCUI-3232 ONLY: Designer panels not required,
enclosed steel base provided. OMNI: 45 degree
designer corners are painted bright gray with a
urethane based paint. Solid color mica panels in
operator’s choice.
GALAXY: 45 degree designer corners are painted
bright red with a urethane based paint. Atlas’
unique “grid pattern” is permanently screened
and laminated in the mica. OAKWOOD: 45 degree
designer corners sections are mirror finish brass-
18 1/8”
31”
DSCUI-3232
18 1/8”
Plan View
Elevation
Inside corner
unit
End View
SPECIFICATIONS:
look. Light oak-look mica panels complete the
appearance package. VISCAYA: 45 degree
designer corners are mirror finish brass-look.
Rich mahogany-look mica front panels
feature stained and sealed hardwood trim.
TRAY SLIDE: 12” wide, solid, ribbed, fixed brackets. OMNI & GALAXY: all stainless steel with
highlighted edge; OAKWOOD & VISCAYA: all
stainless steel. Provided on DSCUO-3232 unit
only. Tray slide not available on DSCUI-3232.
ADJUSTABLE CASTERS: N.S.F. listed, 5” diameter, non-marking neoprene rubber tired swivel
casters. Two casters have foot operated locking
brakes. All Designer Series units feature Atlas’
exclusive adjustable height, leveling casters.
LOCKING DEVICES: When two or more units are
ordered. Atlas’ unique Cam-lock locking system
includes an exclusive interlocking stainless lock
under the top counter on the customer’s side and
a positive action Cam-lock on the operator’s side.
23 1/8”
12”
18 1/8”
23 1/8”
Elevation
ACCESSORIES:
Specifications subject to change without notice.
8 1/8”
1
12”
Stainless steel legs with adjustable feet, in
lieu of casters.
Reversa-Panel an alternate plastic laminate
is substituted for backing sheet on the rear.
The panel may then be reversed in the field,
without the use of tools, to create an alternate look.
31”
Plan View
31”
DSCUO-3232
Outside corner
unit
End View
34”
DS-20
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
10/08-SC
Loading...