Atlas Metal DSCIBU-3240 User Manual
D E S I G N E R S E R I E S
MOBILE COLD
SERVING UNIT
Buf fet Style - Ice Cold Pan
Quantity Item No.
DSCIBU-3240
DSCIBU-3254
DSCIBU-3268
DSCIBU-3285
MODEL #DSCIBU-3254-OW
Shown with accessories
GALAXY - GL
Red finish on frame gray plastic laminate
panels with red grid
pattern.
VISCAYA - VS
Brass finish on frame rich mahogany plastic
laminate panels with
trim molding.
OMNI - OM
Gray finish on frame plastic laminate panels
of operator’s choice.
OAKWOOD - OW
Brass finish on frame light oak plastic laminate panels.
Ideal for breakfast bars, salad bars or cold food bars... anything
traditionally displayed on a bed of ice. The cold pan is sized to
accommodate full size (12” x 20”) and fractional size pans.
This attractive Designer Series unit can stand alone or become an
integral part of your total serving system.
Quality construction, Atlas’ exclusive Reversa-Panel and heavy
gauge stainless steel tops promise years of cost efficient, troublefree service.
Atlas... Serving systems that serve you best!
DESIGNER SERIES FEATURES
Reversa Panel easy access,
reversible, interchangeable
designer panels - available
as an accessory
Stainless Steel LEVER-LATCH
locking system
Adjustable height, leveling
casters
Concealed, heavy-duty, nonmarking neoprene wheels
with locking brakes
Solid, die-cast brass or
chromeplated brackets
Unibody construction with 45
degree designer look corner
supports
Durable stainless steel tops
One person room-to-room
mobility
Easy access flip top breath
guards on all buffet units available as an accessory
All units fit through standard
36” doors
Most flexible decor package
in the industry
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
DS-37
D E S I G N E R S E R I E S
MOBILE COLD SERVING UNIT
Buffet Style - Ice Cold Pan
MODEL “A” COLD PAN DIMENSIONS
DSCIBU-3240 40” 25”L x 20”W x 6-1/8”D
DSCIBU-3254 54” 37-1/2”L x 20”W x 6-1/8”D
DSCIBU-3268 68” 54-1/4”L x 20”W x 6-1/8”D
DSCIBU-3285 85” 69-1/8”L x 20”W x 6-1/8”D
NOTE:
When ordering OMNI, add - OM to model number;
When ordering GALAXY, add - GL to model number;
When ordering VISCAYA, add - VS to model number;
When ordering OAKWOOD, add - OW to model number.
TOP: Topconstructed of 16 gauge, type 304 stainless steel, die-formed, welded, butted and polished to a uniform finish. The cold pan is fully
insulated with high density polystyrene, 1” thick
on all sides, 2” thick on the bottom and enclosed
with a 22 gauge galvanized steel outer liner. The
cold pan will accommodate 12” x 20” pans of 21/2” and 4” depth, and fractional size pans.
OMNI and GALAXY: The Atlas Edge runs the full
length of the top and consists of a double 45
degree angle with a polished finish.
BODY: End mullions are die-formed, 18 gauge
paint grip steel, all welded box beam construction.
Interior sides are enclosed with 20 gauge paint
grip steel panels attached to the end mullions. End
mullions are joinedat the top, front and rear by a 61/2” apron running the full length of the unit.
Corner sections are formed with 45 degree angles
on all sides for the designer look. End mullions are
joined at the bottom with a full length angle iron
frame. Steel surfaces are finished with urethane
based paint.
ALL SIDES: Constructed of rigidized honeycomb
material with plyshield plywood stringers. Panel
is framed with 5/8” x 1” polyethylene and a plastic laminate front. Rear is finished with a backing
sheet to insure watertight integrity. OMNI: 45
degree designer corners are painted bright gray
with a urethane based paint. Solid color mica
panels in operator’s choice.
GALAXY: 45 degree designer corners are painted
bright red with a urethane based paint. Atlas’
unique “grid pattern” is permanently screened
and laminated in the mica. OAKWOOD: 45 degree
designer corners are mirror finish brass-look.
Light oak-look mica panels complete the appearance package. VISCAYA: 45 degree designer cor-
ners are mirror finish brass-look. Rich mahoganylook mica front panels feature stained and sealed
hardwood trim.
A
31 1/4”
Plan View
35 3/8”
Rear Elevation
SPECIFICATIONS:
ADJUSTABLE CASTERS: N.S.F listed, 5” diameter, non-marking neoprene rubber tired swivel
casters. Two casters have foot operated locking
brakes. All Designer Series units feature Atlas’
exclusive adjustable height, leveling casters.
LOCKING DEVICES: When two or more units are
ordered. Atlas’ unique Lever-Latch locking system includes an exclusive interlocking stainless
lock under the top counter on one side and a
positive action Lever-Latch on the other side.
DSCIBU-3240
DSCIBU-3254
DSCIBU-3268
DSCIBU-3285
End View
ACCESSORIES:
Tray slide, 12” wide, solid, ribbed, folddown.
OMNI & GALAXY: all stainless steel with
highlighted edge; OAKWOOD & VISCAYA: all
stainless steel.
Buffet canopy, features Atlas’ unique flip-top
sneeze guard on customer’s side only - SAR
Plexiglas. Canopy body is of millwork construction with plastic laminate
finish. OMNI & GALAXY: stainless steel top
with highlighted edge and chrome plated
brackets; OAKWOOD & VISCAYA: stainless
steel top with laminate inlay on front edge
and brass plated brackets.
Fluorescent light under canopy.
Stainless steel legs with adjustable feet,
in lieu of casters.
Reversa-Panel an alternate plastic laminate
is substituted for backing sheet on the rear.
The panel may then be reversed in the field,
without the use of tools, to create an alternate look.
Specifications subject to change without notice.
DS-38
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
10/08-SC
Loading...