Atlas Metal CART-5, CATR-4 User Manual
MODULAR SERVING SYSTEMS
ALUMINUM - CA
COLD FOOD UNIT
Solid Top
with Refrigerated Base
Item No.
Quantity
CATR-4
CATR-5
DESCRIPTION:
The solid cart refrigerated base provides an extra
utility top, work top or display area with the convenience of a refrigerated base. Right where you
need it most - at your fingertips. The unit is fully
self-contained and can be located anywhere in
your serving line, just plug it in and turn it on.
The attractive streamlined design, plus the variety
of laminates give you a wide range of choices to
complement any decor. The unmatched feature of
the CA-Cart Line is the self-locking device which
eliminates loose fasteners or molding strips to
lock units together. Simply push the units together; the carts will automatically lock and the top
will be flush and level, regardless of the floor’s
condition, it’s the right cart for your serving line
needs.
CATR-4
Shown with accessories,
Tray Slide, Double Deck Display
FEATURES:
Self-contained refrigeration system - just plug
it in and turn it on
Positive self-locking device - keeps tops level
and equipment in place
Fully mobile - each unit is provided with 5” dia.
swivel casters, two with brakes
Versatile - available in a wide range of sizes
and a wide variety of finishes and colors
NSF certified and UL recognized
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
CA-19
COLD FOOD UNIT
Solid Top with Refrigerated Base
MODEL “A”
CATR-4 63-3/4” 10 Pans - 1 Door - 8 cu. ft. 6.8 amps. - 120 V - 1/4 HP 400
CATR-5 77-1/2” 15 Pans - 2 Doors - 10 cu. ft. 6.8 amps. - 120 V - 1/4 HP 480
30 1/2”
Plan View
REFRIGERATED BASE
CAPACITY - 12” X 20” PANS
A
35”
ELECTRICAL
CHARACTERISTICS
Rear Elevation
SPECIFICATIONS:
TOP: Solid top, constructed of 16 gauge, type 304 stainless steel, dieformed,
welded, ground and polished to a uniform finish. An integral locking device
shall be provided to align and retain cart positioning when two or more carts
are joined.
BODY: Frame construction shall be of hi-tensile aluminum square tubing, 11/4” x 1-1/4”. Frame sections are welded construction, ground and polished
to a uniform finish. Body is complete with font panel of plastic laminate on
.050 aluminum. Owner to specify finish.
REFRIGERATED BASE: Double wall constructed with a 20 gauge, type 304
stainless steel interior liner, with coved corners. Cart body forms the exterior of the base with an 18 gauge stainless steel facia on operator’s side. The
unit is insulated with 1” of high density polystyrene on all sides. The interior
is provided with a slide assembly to accommodate 12” x 20” pans. A 2-1/2”
dial thermometer is mounted in the facia.
Doors are double wall constructed of18 gauge, type 304 stainless steel, fully
insulated with high density polyurethane and provided with edge mounted,
chrome plated hinges and a slam action latch. Doors are complete with a
moisture-proof gasket.
REFRIGERATION SYSTEM: The compressor housing is integral with the body
of the unit. A fully self-contained condensing unit is provided, with a hermetically sealedcompressor and a thermostat control.The system is provided with
a forced air evaporator and drains into a condensate evaporator, pre-wired
into the unit. The system is fully chargedwith CFC free refrigerant and ready to
operate. Two (2 ea.) removable louvered access panels are provided.
ELECTRICAL: The unit will be wired for 15 amps., 120 volt, single phase operation with an on/off thermostat switch and pilot light. A 6’ long, 3-wire cord
and plug (NEMA 5-15P) will be provided.
CASTERS: The casters shall be 5” diameter, non-marking rubber tired, swivel
type with ball bearings, in both swivel and axle raceways, and provided with
grease fittings. Both casters on operator’s side have toe activated brakes.
Specifications subject to change without notice.
ACCESSORIES:
SL - Tray Slide, 11-1/4” wide, stainless steel, 2-rail, fold down
SLT - Tray Slide, 11-1/4” wide, stainless steel, 3-rail, fold down
SLS - Tray Slide, 11-1/4” wide, stainless steel, solid, ribbed, fold down
SLF - Tray Slide, 11-1/4” wide, plastic laminate with S/S runners, fold down
SH - Work Shelf, 8” wide, stainless steel, fold down
CB - Work Shelf, 8” wide, hardwood maple, fold down
CR - Work Shelf, 8” wide, Richlite, fold down
DDC - Double Deck Display Case
DDLC - Double Deck Display with fluorescent lights
DD-DC - Double Deck Display Case - dual service
DTC - Triple Deck Display Case
DTLC - Triple Deck Display Case with
fluorescent lights
CSG - Food Guard
OSC-X/OSDC-X - Buffet style overshelf,
single/dual service
OSC/OSDC - Buffet style overshelf with
fluorescent light,single/
Plexiglas end guards for display case
and buffet canopies
SG - Plexiglass sneeze guard
S - Stainless steel front panel
EP - End panel, stainless steel
Front skirt with recessed casters
End skirt
Rear skirt
Sliding Drawers, (2 ea.), in lieu of door
Slide assembly for 18” x 26” pans, (7 ea.), 3-1/2” O.C.
5-year compressor warranty
SHIP WT.
(lbs.)
8 1/2”
End View
dual service
CA-20
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
10/08-SC
Loading...