Atlas Metal CAPT-3 Specifications
MODULAR SERVING SYSTEMS
ALUMINUM - CA
COLD FOOD UNIT
Refrigerated Pass-Through
Item No.
Quantity
CAPT-3
CAPT-4
CAPT-4
Shown with accessories,
Tray Slide,End Panels
DESCRIPTION:
The pass-through merchandiser is the ideal display
for all your pre-plated or pre-wrapped salads,
desserts, and deli products. It’s also the perfect display for bottled juices and specialty drink items.
Large sliding, self-closing glass doors on the operator’s side, as well as on the customer’s side, make
loading a snap. The large display area is
provided with adjustable height shelves and full
lighting to enhance product display. The display
case is fully self-contained and can be located anywhere in your serving line - just plug it in and turn
it on.
The attractive streamlined design, plus the variety
of laminates give you a wide range of choices to
complement any decor. The unmatched feature of
the CA-Cart Line is the self-locking device which
eliminates loose fasteners or molding strips to
lock units together. Simply push the units together; the carts will automatically lock and the top
will be flush and level, regardless of the floor’s
condition. It’s the right cart for your serving line
needs.
FEATURES:
Large lighted display area with adjustable
shelves - it’s the ideal merchandiser
Sliding glass doors on customer’s and
operator’s side, makes loading and selfservice move quickly
Forced air evaporator blower system for
maximum efficiency in cooling
Self-contained refrigeration system - just
plug it in and turn it on
Positive self-locking device - keeps tops
level and equipment in place
UL recognized. NSF Standard 7 by UL
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
CA-25
COLD FOOD UNIT
Refrigerated Pass-Through
MODEL “A” “B”
CAPT-3 50” 41-1/2” 11 amps. - 120 V - 1/2 HP 570
CAPT-4 63-3/4” 54-1/4” 11 amps. - 120 V - 1/2 HP 660
A
30 1/2”
Plan View
ELECTRICAL
CHARACTERISTICS
33 1/2”
35”
SPECIFICATIONS:
TOP: Constructed of 16 gauge, type 304 stainless steel, die-formed, welded,
ground and polished. Top is provided with an opening to receive the appropriate sized drop-in cold serving unit. An integral locking device shall be provided to align and retain cart positioning when two or more carts are joined.
BODY: Frame construction shall be of hi-tensile aluminum square tubing, 11/4” x 1-1/4”. Frame sections are welded construction, ground and polished
to a uniform finish. Body is complete with front panel of plastic laminate on
.050 aluminum. Owner to specify finish.
DISPLAY CASE: Double wall constructed of type 304 stainless steel -20
gauge, both interior and exterior, and filled with 2” of foamed-in-place
polyurethane insulation. Customer’s side and operator’s side are provided
with a set of two (2) sliding, self-closing, thermo-pane insulated glass doors.
The doors are removable for ease of cleaning.
The display case is provided with two (2) plastic coated wire shelves,
adjustable on 1” increments and two (2) sets of fluorescent light fixtures
mounted behind plastic guards, which are recessed into the side panels.
The light fixtures are provided with a separate on/off switch. An internal
thermometer is provided.
REFRIGERATION SYSTEM: The compressor housing shall be fabricated
from formed 14 gauge galvanized and bolted to the base of the unit. A fully
self-contained condensing unit is provided, with a hermetically sealed
compressor and a thermostat control. The system is also provided with a
forced air evaporator for even temperature throughout the display case,
and drains into a condensate evaporator pre-wired in the unit. The system
is fully charged with CFC free refrigerant and ready to operate.
NOTE: Proper ventilation must be provided in counter.
ELECTRICAL: The unit will be wired for 15 amps., 120 volt, single phase oper-
ation with an on/off thermostat switch and pilot light. A 6’ long, 3wire cord
and plug (NEMA 5-15P) will be provided.
CASTERS: The casters shall be 5” diameter, non-marking rubber tired, swivel
type with ball bearings, in both swivel and axle raceways, and provided with
grease fittings. Both casters on operator’s side have toe activated brakes.
Specifications subject to change without notice.
SHIP WT.
(lbs.)
8 1/2”
Rear Elevation
Side View
ACCESSORIES:
SL - Tray Slide, 11-1/4” wide, stainless steel, 2-rail, fold down
SLT - Tray Slide, 11-1/4” wide, stainless steel, 3-rail, fold down
SLS - Tray Slide, 11-1/4” wide, stainless steel, solid, ribbed, fold down
SLF - Tray Slide, 11-1/4” wide, plastic laminate with S/S runners, fold down
SH - Work Shelf, 8” wide, stainless steel, fold down
CB - Work Shelf, 8” wide, hardwood maple, fold down
CR - Work Shelf, 8” wide, Richlite, fold down
S - Stainless steel front panel
EP - End panel,plastic laminate/
stainless steel
RP - Fixed rear panel
RPS - Rear sliding doors
US - Stainless steel undershelf, removable
Front skirt with recessed casters
End skirt
Rear skirt
Door locking device, installed
Extra shelf
Transparent mirror
Solid glass front
Solid stainless steel back with mirror finish
Plastic laminate trim on display case
5-year compressor warranty
CA-26
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
10/08-SC
Loading...