Atlas Metal CAGP-2 User Manual

MODULAR SERVING SYSTEMS
CARVING UNIT
ALUMINUM - CA
Item No.
CAGP-2
DESCRIPTION:
Sell the sizzle! Nothing increases impulse sales more than carving a steamship round, roast turkey or ham right in the serving line. The carv­ing cart can install anywhere in your serving line, everything is included, gravy pan and perforated carving plate. It’s fully assembled and pre-wired ­just plug it in and turn it on.
The attractive streamlined design, plus the variety of laminates give you a wide range of choices to complement any decor. The unmatched feature of the CA-Cart Line is the self-locking device which eliminates loose fasteners or molding strips to lock units together. Simply push the units togeth­er; the carts will automatically lock and the top will be flush and level, regardless of the floor’s condition. It’s the right cart for your serving line needs.
CAGP-2 SHOWN
Shown with accessories,
Undershelf, End Panels
HLA-Heat Lamp
FEATURES:
Comes complete with au-jus pan, and perforated stainless stop with meat prongs
Positive self-locking device - keeps tops level and equipment in place
Fully mobile - each unit is provided with 5” dia. swivel casters, two with brakes
NSF certified, hot food well is UL recognized -
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
CA-37
CARVING UNIT
MODEL PAN SIZE
CAGP-2 19-7/8” X 25-1/2 X 6” 14.2 amps. - 1.7 KW - 120 V 225
ELECTRICAL CHARACTERISTICS
HOT FOOD WELL
36 1/4”
30 1/2”
35”
Plan View Rear Elevation End View
SHIP WT.
(lbs.)
8 1/2”
SPECIFICATIONS:
TOP: Constructed of 16 gauge, type 304 stainless steel, die-formed, welded, ground and polished. An integral locking device shall be provided to align and retain cart positioning when two or more carts are joined. BODY: Frame construction shall be of hi-tensile aluminum square tubing, 1­1/4” x 1-1/4”. Frame sections are welded construction, ground and polished to a uniform finish. Body is complete with front panel of plastic laminate on .050 aluminum. Owner to specify finish. CARVING UNIT: The cart is complete and includes a WHGP-2 drop-in hot unit installed in the top. Constructed of 18 gauge, type 304 stainless steel, with raised perimeter bead and solid vinyl gasket. The inner liner is one piece construction, all welded, ground and polished to a uniform finish. All corners are coved with a minimum 1/4” radius. A 3/4” dia. drain with strain­er, brass nipple, and valve is provided. The pan is fully insulated with high density fiberglass insulation, 1” thick on all sides, 2” thick on the bottom, and enclosed by a 22 gauge galvanized steel outer liner. PERFORATED ADAPTER: The liner is fitted with a perforated adapter plate with four-prong meat holder and ladle opening. Directly beneath the adapter plate is a sloped gravy pan. The adapter and pan are removable for cleaning. ELECTRICAL: The unit is provided with two (2 ea.) 850 watt heating elements, pre-wired to a single thermostat control, with a pilot light. One (1 ea.) 6’ long, 3-wire cord and plug are provided (NEMA 5-15P.) CASTERS: The casters shall be 5” diameter, non-marking rubber tired, swivel type with ball bearings, in both swivel and axle raceways, and provided with grease fittings. Both casters on operator’s side have toe activated brakes.
Specifications subject to change without notice.
ACCESSORIES:
HLA - Heat lamp
SL - Tray Slide, 11-1/4” wide, stainless steel, 2-rail, fold down
SLT - Tray Slide, 11-1/4” wide, stainless steel, 3-rail, fold down
SLS - Tray Slide, 11-1/4” wide, stainless steel, solid, ribbed, fold down
SLF - Tray Slide, 11-1/4” wide, plastic laminate with S/S runners, fold down
SH - Work Shelf, 8” wide, stainless steel, fold down
CB - Work Shelf, 8” wide, hardwood maple, fold down
CR - Work Shelf, 8” wide, Richlite, fold down
SG - Plexiglass sneeze guard
S - Stainless steel front panel
EP - End panel,plastic laminate /stainless steel
RP - Fixed rear panel
RPS - Rear sliding doors
US - Stainless steel undershelf, removable
Front skirt with recessed casters
End skirt
Rear skirt
CSG - Food guard
PRV - Vertical protector case
CA-38
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
10/08-SC
Loading...