Atlas Metal CAFB-4 User Manual
MODULAR SERVING SYSTEMS
ALUMINUM - CA
COLD FOOD UNIT
Refrigerated Frost Top
with Refrigerated Base
These units have not been
performance tested for use
with potentially hazardous
foods.
Item No.
Quantity
CAFB-4
CAFB-5
Tray Slide, Work shelf, Overshelf
DESCRIPTION:
The frost cart provides the most attractive way of
displaying your pre-plated cold foods and adds
the convenience of a refrigerated base for backup
storage. The unit is fully self-contained and can
be located anywhere in your serving line. Just
plug it in and it frosts over quickly providing the
perfect setting for salads and desserts.
The attractive streamlined design, plus the variety
of laminates give you a wide range of choices to
complement any decor. The unmatched feature of
the CA-Cart Line is the self-locking device which
eliminates loose fasteners or molding strips to
lock units together. Simply push the units together; the carts will automatically lock and the top
will be flush and level, regardless of the floor’s
condition. It’s the right cart for your serving line
needs.
FEATURES:
“Quick,” frost top, stands 1” above counter for
attractive display - ideal for pre-plated foods
Refrigerated base for backup storage
CAFB-4
Shown with accessories,
Fully insulated for maximum efficiency and
energy savings
Self-contained refrigeration system - just plug
it in and turn it on
Positive self-locking device - keeps tops level
and equipment in place
Fully mobile - each unit is provided with 5” dia.
swivel casters, two with brakes
Versatile - available in a wide range of sizes and
a wide variety of finishes and colors
NSF certified and UL recognized
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
CA-17
COLD FOOD UNIT
Refrigerated Frost Top with Refrigerated Base
MODEL “A”
CAFB-4 63-3/4” 19-1/2” X 52-3/4” 10 Pans - 1 Door - 8 cu. ft. 16.6 amps. - 120 V - 1/3 HP & 1/4 HP 610
CAFB-5 77-1/2” 19-1/2” X 66-1/2” 15 Pans - 2 Doors - 10 cu. ft. 16.6 amps. - 120 V - 1/3 HP & 1/4 HP 705
30 1/2”
Plan View
FROST TOP
SIZE
A
REFRIGERATED BASE
CAPACITY - 12” X 20” PANS
35”
Rear Elevation
ELECTRICAL
CHARACTERISTICS
8 1/2”
SPECIFICATIONS:
TOP: Constructed of 16 gauge, type 304 stainless steel, die-formed, welded,
ground and polished. Top is provided with an opening to receive the appropriate sized drop-in cold serving unit. An integral locking device shall be provided to align and retain cart positioning when two or more carts are joined.
BODY: Frame construction shall be of hi-tensile aluminum square tubing, 11/4” x 1-1/4”. Frame sections are welded construction, ground and polished
to a uniform finish. Body is complete with front panel of plastic laminate on
.050 aluminum. Owner to specify finish.
REFRIGERATED FROST TOP: The cart is complete and includes a WF series
drop-in refrigerated frost top installed in the top. Constructed of 18 gauge,
type 304 stainless steel, with raised perimeter bead and solid vinyl gasket.
Frost top is 16 gauge stainless steel and has copper tubing firmly soldered to
the exterior bottom; insulated with 1-1/2” of high density polystyrene and
enclosed with an 18 gauge galvanized steel outer liner.
The top stands 1” above the counter top and is surrounded by 1/2” full
perimeter gutter to collect melted condensate; a 1/2” IPS drain is provided.
REFRIGERATED BASE: Double wall constructed with a 20 gauge, type 304
stainless steel interior liner, with coved corners. Cart body forms the exterior of the base with an 18 gauge stainless steel facia on operator’s side. The
unit is insulated with 1” of high density polystyrene on all sides. The interior
is provided with a slide assembly to accommodate 12” x 20” pans. A 2-1/2”
dial thermometer is mounted in the facia.
Doors are double wall constructed of 18 gauge, type 304 stainless steel, fully
insulated with high density polyurethane and provided with edge mounted,
chrome plated hinges and a slam action latch. Doors are complete with a
moisture-proof gasket.
REFRIGERATION SYSTEM: Two compressor housings are provided, one integral with the cold pan, the other integral with the refrigerated base. Two (2
ea.) fully self-contained condensing units are provided, each with a hermetically sealed compressor and a thermostat control. The refrigerated base is
also provided with a forced air evaporator which drains into a condensate
evaporator. The systems are fully charged and ready to operate. Removable
louvered access panel is provided.
ELECTRICAL: The unit will be wired for 15 amps., 120 volt, single phase operation with an on/off thermostat switch and pilot light. A 6’ long, 3wire cord
and plug (NEMA 5-15P) will be provided.
CASTERS: The casters shall be 5” diameter, non-marking rubber tired, swivel type with ball bearings, in both swivel and axle raceways, and
provided with grease fittings. Both casters on operator’s side have toe activated brakes.
ACCESSORIES:
SL - Tray Slide, 11-1/4” wide, stainless steel, 2-rail, fold down
SLT - Tray Slide, 11-1/4” wide, stainless steel, 3-rail, fold down
SLS - Tray Slide, 11-1/4” wide, stainless steel, solid, ribbed, fold down
SLF - Tray Slide, 11-1/4” wide, plastic laminate with S/S runners, fold down
SH - Work Shelf, 8” wide, stainless steel, fold down
CB - Work Shelf, 8” wide, hardwood maple, fold down
CR - Work Shelf, 8” wide, Richlite, fold down
DDC - Double Deck Display Case
DDLC - Double Deck Display with fluorescent lights
DD-DC - Double Deck Display Case - dual service
DTC - Triple Deck Display Case
DTLC - Triple Deck Display Case with
fluorescent lights
CSG - Food Guard
OSC-X/OSDC-X - Buffet style overshelf,
single/dual service
OSC/OSDC - Buffet style overshelf with
fluorescent light,single/
SG - Plexiglas sneeze guard
Plexiglas end guards for protector cases
and buffet canopies
S - Stainless steel front panel
EP - End panel, stainless steel
Front skirt with recessed casters
End skirt
Rear skirt
5-year compressor warranty (2 required)
Slide assembly for 18” x 26” pans, (7 ea.), 3-1/2” O.C.
dual service
SHIP WT.
(lbs.)
End View
Specifications subject to change without notice.
CA-18
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
10/08-SC
Loading...